Fall Protection Anchors

Heavy-duty 1 3/4" polyester webbing with rugged forged alloy-steel hardware.3" wear pad protects primary webbing from cuts and abrasion.Ideal for I-beams and other properly rated structural members.Economical and lightweight.Can be used repeatedly.Meets the requirements of OSHA 1926 and ANSI Z3591-3/4" load-bearing web with 3" wide full-length wear pad for abrasion resistanceAppropriately sized alloy steel D-rings provide simple pass-through choke-on installation.May be passed-through multiple...

The Tie Down 65077Z Parapet Roof Anchor provides a non-penetrating clamp solution for parapet walls where roof penetration isn’t viable. It supports a single tie-off point and is rated at 5,000 lb for fall arrest. The anchor adjusts to fit parapet widths from 4 to 16 inches and is compatible with horizontal lifeline spans up to 20 ft. Key Features Non-penetrating parapet wall clamp anchor Single tie-off point rated for 5,000 lb Adjustable to fit parapet widths from 4″ to 16″ Compatible with...

The 30° angle fixed length, factory engineered Horizontal Lifeline System is for use by 3 workers in fall restraint or 2 in fall arrest. This system is available in a 20’ kit with or without a carry bag. This 3rd party engineered horizontal line kit is a cost-effective way to have multiple workers on the roof with room to move freely. Engineering standards specify that a horizontal lifeline without an energy absorbing device subjected to fall hazards must have a 30° anchors between anchorage...

Enhance your roofing safety with the RIDGEPRO® 8′ Extension Pole, designed to complement the RIDGEPRO® Safety Anchor System. This robust extension pole extends from 8 feet to an impressive 16 feet, allowing you to securely position the safety anchor system onto most roofs directly from your ladder. Key Features: Extended Reach: The pole extends from 8′ to 16′, providing ample length to reach most roofing scenarios.Replacement Pole: This is a replacement pole specifically for the RIDGEPRO®...

The Guardian Fall Protection Cross Arm Strap Anchorage Connector (01630) is a reliable cinch-down anchorage device designed for quick and secure tie-off. Made from high-strength polyester webbing, this 4 ft strap wraps around beams, pipes, or structural members to provide a safe fall protection connection. It features one large and one small steel D-ring for easy attachment of lanyards or lifelines. Lightweight and portable, this connector installs in seconds without tools and is reusable for...

This single-use roof anchor is designed for temporary use on wood roof ridge installations. It features a 6″ × 1½″ bend-in-place nailing plate that allows the user to conform the anchor to roof peaks and includes 16D nails for secure ridge installation. The anchor is constructed of plated carbon steel and includes a ¾″ connecting eye compatible with standard fall-protection equipment. Key features: 6″ × 1½″ bend-in-place nailing plates conform to roof ridges Includes 16D nails for...

The Super Anchor 2833 and 2833-DP TrussBar anchors are temporary moveable anchors designed for use during framing and sheathing. They fit 2x4 and 2x6 top chords spaced 24 inches on center and support up to two users for fall arrest or restraint. After roof sheathing is complete, the anchor remains in place but becomes nonfunctional while tie-off straps are removed or cut off. Features Temporary framing-stage roof anchor Supports two users for fall arrest or fall restraint Fits 2x4 and 2x6 top...

Tie-Off Straps are made from 2” wide polyester or nylon and are designed for use as temporary anchorage points to connect vertical lifelines, SRL’s, web lanyard and rope lanyards. Use on wood, steel and concrete structures. Tie-Off straps are wrapped, cinched around the structure to make for a secure anchor or can be embedded into concrete and evacuated when finished with the job. Please see the part number list below for Application, Length, Compliance and Packaging information for all our...

TriRex™Mobile Fall Cart 3 Person Fall Arrest +2 Person Fall Restraint The Trirex is a mobile fall protection system that provides safe and efficient access to elevated work areas. It is designed to be used by up to five workers at a time, and it meets and exceeds all OSHA and ANSI standards for mobile fall protection. The Trirex features a patented engagement system that locks your anchor point into its deepest point of penetration during a fall, providing superior safety. It also has a...

The SafeWaze SW900 Parapet Wall Anchor is designed to restrain tools up to 10 lb and reduce dropped object hazards. It features a dual‑end connector system—one end includes a durable choker loop with release tab, and the other a steel swivel carabiner. The elasticized webbing extends for added reach and retracts to minimize slack, making it ideal for mobile-duty tasks in construction, roofing, or maintenance environments.

The Standing Seam Roof Anchor(SSRA1) is a revolutionary product allowing homeowners, building owners, and contractors to work safely on standing seam roofs without penetrating the panels. Engineered to revolutionize fall protection anchorage attachment on Standing Seam Roofs! The patented, non-penetrating design of this life-saving device is unlike anything currently available. It consists of a solid 6061-T6 aluminum body with 12 stainless steel set screws and 12 nylon tipped stainless steel...

The Guardian Fall Protection CB Screws (00668) are designed specifically for installing Guardian CB Series roof anchors into wood substrates. This 40-count pack provides durable, heavy-duty fasteners required for permanent anchor installation. Manufactured from high-strength coated steel, these screws ensure secure anchorage while resisting corrosion and weather exposure. When used with Guardian CB-12, CB-18, or CB-22 roof anchors, the 00668 screw set ensures proper compliance with OSHA and...

This anchor is designed for temporary fall-protection use in existing window or door openings during construction stages when frames are open. It installs tool-free via a clamp-in, non-penetrating method and adjusts for openings from 21″ to 51″ wide. The body is built from lightweight extruded aluminum and uses durable steel clamping feet to grip structural frames without marring surfaces. It complies with OSHA 1926.502 requirements for temporary anchorage. Key features: Tool-free clamp-in,...

This overhead anchorage connector is constructed for permanent mounting on steel I-beams or columns. It features a 2″ × 4½″ unplated alloy steel anchoring plate ideal for weld-on installation, and a plated alloy steel D-ring rated at 5,000 lb minimum static strength. The unit also provides ½″ bolt holes for optional fixed-position installation when welding is not used. Key features: 2″ × 4½″ unplated alloy steel anchoring plate optimized for weld-on installation Plated alloy steel D-ring rated...

The Guardian Fall Protection Pitch Pro Anchor – Gray (10542) is a permanent roof anchor designed to provide safe, reliable fall protection for residential roofing applications. Constructed from high-strength steel with a durable gray powder-coated finish, this anchor blends seamlessly with common roofing materials while delivering lasting protection. The Pitch Pro installs directly over the ridge of wood-framed roof structures, creating a secure attachment point for personal fall arrest...

The Guardian Fall Protection CB Screws for Metal Application (00669) are specialty fasteners designed to secure Guardian CB Series roof anchors into steel substrates. Built from high-strength coated steel, these screws provide the durability and holding power required for long-term permanent anchorage. Ideal for use with CB-12, CB-18, CB-22, and other CB models rated for steel decks, this hardware ensures proper compliance with OSHA and ANSI standards. The Guardian 00669 screws provide a...

The SafeWaze 360° Roof Anchor is a temporary and reusable fall protection-anchor point, offering a full 360° working radius. Built for use on wood roofs and installs in seconds with the provided fasteners. • 360° Working radius• Zinc Plated Steel (Base), Painted Steel (Connection Point)• (6) 1/4” x 3” in Stainless lag screws for wood installation• Weight capacity: Single person - 310 lbs.(Including person, tools, and materials)• Minimum strength 5,000 lbs.• Meets:OSHA 1926.502 Please read and...

A rugged, versatile anchor for single-user fall protection that you can mount in a variety of ways depending on the structure. The D-ShakL2 uses a heavy-duty shackle with a captured, free-rotating D-ring to simplify clipping in and reduce twist at the connection point. Install temporarily to wood framing with WS screws, or make it permanent by bolting or welding to steel or by using engineered concrete anchors. Rated to 5,000 lb and built with a hot-dip galvanized finish for long service life,...

Purpose-built for tile and slate roofs, the 2815T is a permanent, low-profile double D-ring anchor that slides under the last course so only the rings show. Its extended strap (with ~40" between D-rings) lets you hit structure while keeping a clean look, and it installs without penetrating the sheathing. A factory butyl strip and stainless fasteners help deliver a water-resistant, long-lasting tie-off point that meets OSHA/ANSI. Features Tile/slate ready: Designed for high- and low-profile...

12 cup tipped set screws - consumable tip for permanent attachment of the SSRA to standing seam panels. Perfect for contractors that need to have extra cup tipped screws on hand in case of droppage or loss.

Fall Protection Distributors LLC, brings you a revolutionary product allowing Homeowners, Building Owners, and Contractors to work safely on standing seam roofs without penetrating the panels. The Standing Seam Roof Anchor (SSRA1). The patented, Non-Penetrating design of the standing seam roof anchor is unlike anything currently available. Its the only certified component system for mounting just about anything to a standing seam roof. The interchangeable mount allows for attachment of devices...

The Guardian Truss Boss Anchor Kit (00420) is a truss-mounted anchorage solution engineered for early installation during residential construction. This kit enables safe pre-placement of anchor points before roof trusses are erected, allowing instant fall protection tie-off as the truss is installed. Made from non-corrosive galvanized steel, and including flashing and a weatherproof cap, it forms a watertight seal once the roofing is installed. Lightweight and quick to install without...

The Tie Down 13864 Standing Seam Roof Anchor is a non-penetrating fall protection anchor designed to clamp directly onto standing seam roofs without penetrating the roof surface. It supports a rated strength of 5,000 lb and accommodates worker loads from 130 to 310 lb. The anchor is reusable, made of zinc electroplate steel, and compatible with MR-24, VSR, and similar seam profiles. Key Features Non-penetrating clamp design mounts on standing seam profiles Reusable design useful across...

The SafeWaze 020-1600 Replacement Rivets are OEM-grade components designed for use in the maintenance and repair of SafeWaze fall protection equipment. These rivets restore structural integrity when replacing worn or damaged hardware on approved SafeWaze models. Ideal for authorized service teams or certified repair technicians.

Introducing the newly redesigned PR 600 mobile anchoring system, now available at a lower price. This complete system, which includes a cart, ballast weights, and pivot plates, provides fall protection for up to three people, with two for fall arrest and one for fall restraint. The system is now lighter and easier to assemble and disassemble, making it easier to lift over ducts and piping that may lay over the roof's work surface. The component parts can even be taken up to the roof in an...

The Guardian Fall Protection CB-1-B Bolt-On Wall Anchor (00600) is a permanent fall protection solution designed for use on wood, steel, or concrete wall structures. Constructed from heavy-duty galvanized steel, this anchor provides a secure tie-off point for fall arrest, restraint, or work positioning applications. The CB-1-B is designed for bolt-on installation, offering long-term durability and stability, making it ideal for both residential and commercial construction environments. Fully...

The Guardian Fall Protection 00255 Screw Down Metal Roof Anchor is a durable and reusable fall protection anchor designed for installation on metal roof structures. Built from high-strength steel, this anchor provides a secure attachment point for personal fall arrest systems. Its screw-down design ensures a reliable hold, making it ideal for construction, maintenance, and roofing applications. Compact and lightweight, it can be easily installed and removed, offering flexibility for both...

The FallTech 7348 Pass-Through Anchor Sling is designed to provide a durable, reusable anchorage connection on properly rated structural members such as I-beams or scaffolding. Built with heavy-duty 1-3/4″ polyester webbing and reinforced with a 3″ wide wear-pad, this 4-foot length sling includes two forged alloy-steel D-rings—a large pass-through D-ring and a smaller connection D-ring—to allow quick wrap/choke installation and attachment of lifelines or SRLs. Rated at 5,000 lb static strength...

The Malta Dynamics A6316 Parapet Anchor is a temporary, non-penetrating anchorage connector designed for flat roofs with parapet walls. It provides an overhead tie-off point for personal fall arrest and fall restraint systems without requiring drilling or permanent wall modifications. The anchor features an adjustable clamp design that fits a range of parapet wall thicknesses and installs without tools using dual tightening handles. Protective rubber pads help reduce contact damage to the wall...

The Malta Dynamics A6318 Adjustable Pitch Roof Anchor is a temporary anchorage connector designed for use on sloped wood roofs during roofing, remodeling, and construction work. The anchor bends over the roof peak or adjusts to match roof pitch, providing a tie-off point for personal fall arrest systems. Constructed from alloy steel, the anchor installs using 16d common nails through pre-punched holes for fast setup on the jobsite. Its removable design allows the anchor to be detached after...

The Guardian Fall Protection Swivel Concrete Anchor (00242) is a heavy-duty, reusable anchorage connector designed for concrete surfaces. Featuring a 360° swiveling D-ring, this anchor allows lifelines, SRLs, and lanyards to rotate freely, reducing line tangling and improving worker mobility. Constructed from high-strength steel with a zinc-plated finish for corrosion resistance, the 00242 provides a reliable tie-off point for fall arrest and restraint systems. It installs quickly into cured...

The SSRA3 Universal Mounting Plate was engineered as a secure non-penetrating mounting solution for various equipment on standing seam roof systems. Constructed of 6061-T6 Aluminum and professionally tested to over 10,000 lbs., far beyond the strength of any roofing system. The SSRA3 is pre-drilled to accept the FallTech 7395A / 7395D Rotating SRD anchor and self retracting devices up to 65 ft. However, up to 12 additional mounting holes may be drilled to accept a wide range of equipment....

The Malta Dynamics A6351 Roof Anchor features a 360-degree swivel D-ring, offering flexible and secure tie-off for fall protection systems on wood structures. This premium anchor allows the worker to move freely in any direction without compromising safety. Made from heavy-duty galvanized steel, the A6351 is built to perform in demanding environments and meets both OSHA and ANSI standards for rooftop anchorage. key words: 360° swivel D-ring provides maximum mobility while remaining tied off...

The Guardian Fall Protection Beamer 2000 Fall Arrest Anchor (00101) is a versatile and reusable anchor point designed for use on structural steel I-beams. Adjustable to fit beam flanges ranging from 3.5 to 14 inches wide and up to 1.25 inches thick, it provides a secure and OSHA-compliant tie-off point for fall arrest systems. Constructed from durable steel and aluminum components, the Beamer 2000 installs quickly without tools and can be repositioned as needed, making it an excellent choice...

The Guardian SkyHook Screws for Metal Application (00349) are a set of 30 self-drilling, hex-head fasteners specifically designed to securely mount Guardian SkyHook and CB Roof Anchors onto metal substrates. Engineered for simplicity and reliability, these screws ensure quick and dependable installations, making them essential for setting up fall protection tie-offs on metal surfaces. Their compatibility and robust design streamline anchorage setup, enhancing jobsite safety and efficiency. Key...

The Guardian Fall Protection Permanently Adjustable Standing Roof Anchor (53221) provides a durable, permanent fall protection solution for standing seam metal roof systems. Designed with an adjustable clamp mechanism, this anchor fits a wide range of seam spacing and profiles, ensuring a secure connection without penetrating the roof surface. Constructed from high-strength steel and engineered for long-term performance, the 53221 creates a reliable attachment point for personal fall arrest...

This truss anchor kit is designed for permanent installation on wood roof truss members 2 × 4 or larger. It features a 10-3/4-inch stainless steel post with an 11/16-inch connecting eye, a weather-resistant post cap with zip-tie, and a 10-inch roof flange. The kit includes stainless steel nails for installation and meets OSHA 1926.502 fall-protection anchorage requirements. Key features: 10-3/4″ stainless steel post with 11/16″ connecting eye  Weather-resistant post cap with zip-tie and...

A permanent roof anchor engineered for pre-engineered metal buildings that use Z-purlins. The Super Z-Purlin Anchor provides a discreet, code-compliant tie-off point for routine access and service work. The single pack includes everything needed for a watertight install—anchor, stem, EPDM flashing with vulcanized aluminum strip, Grade 8 bolts, and the installation manual—so crews can achieve a clean, reliable finish in one visit. Rated to 5,000 lb for one user, it’s built from...

We have recently upgraded our horizontal lifeline systems to include a 4-person 100' rope, which can be shortened to any length. 2-person capacity on standing seam roofs and 4-person capacity when anchored with cross arm straps. Temporary Horizontal Lifeline Kit Includes 100' Kernmantle Rope, won't scratch metal roof panels. Everything you need to provide a temporary Horizontal Lifeline on a 22 ga. or 24 ga. steel standing seam roof.Kit Includes: Four Standing Seam Roof Anchors (SSRA1)Two...

Built for metal building purlin structures, this permanent Z-purlin anchor provides secure, single-user connection for both fall arrest and fall restraint. The 11-gauge 430 stainless steel body resists corrosion, while an EPDM flashing base with a vulcanized aluminum strip helps seal out weather. Rated to 5,000 lb minimum breaking and tensile strength, it’s a rugged, long-term solution for rooftop safety on industrial and commercial sites. Features Dual-mode safety: Supports fall arrest and...

A compact, jobsite-tough anchor strap designed to create a quick tie-off around beams, posts, or truss chords. One end features a slotted D-ring that lets the strap cinch cleanly and stay put; the opposite end uses a small D-ring for your connector. The 36-inch length is easy to route in tight spaces, and the heavy-duty webbing stands up to daily use while staying flexible for fast installs. Features 36 in overall length for tight or confined anchorage points Heavy-duty, abrasion- and...

Meet the Safety Bull - Smaller than the original TriRex and lighter than the Stinger the Safety Bull is Leading Edge Safety's most versatile mobile fall protection unit. Having an anchorage point on wheels has been a revolution in fall protection. We know that the industry has long sought a more compact fall protection solution, and thus Leading Edge is extremely proud to introduce the Safety Bull. Smaller than the original TriRex and lighter than the Stinger the...

The SafeWaze FS810 Pro Vertical Retractable Lifeline provides compact, reliable fall protection using a steel cable fall arrest lifeline housed in a durable aluminum casing. Each unit features a stainless steel or galvanized retractable cable with a sealed braking system—designed for vertical ascent, descent, or fall arrest scenarios. With lengths ranging from 6 ft to 20 ft, this series delivers quick deployment, easy retraction, and consistent arrest performance, making it ideal for...

The Guardian Fall Protection Window Gap Anchor (15176) is a portable, adjustable anchorage connector designed for installation in window and wall openings. Its innovative design uses a compression fit to create a secure tie-off point without the need for drilling or fasteners. Made from durable, powder-coated steel, the Window Gap Anchor is reusable and easy to transport, making it ideal for temporary applications. Designed for use in construction and industrial environments, the Guardian...

The SafeWaze FS-EX400-15 Ratcheting Anchor Strap is a portable, reusable anchorage designed for wrap-around attachment on columns, posts, or boom structures. Featuring 15 ft of 2" polyester webbing with a double-locking ratchet buckle, a galvanized metal tensioner, and a sturdy alloy steel D-ring, this strap meets ANSI/OSHA fall arrest performance standards and maintains a secure fit under load with minimal slippage Tech Sheet ...

The Safety Bar 1011 is a temporary, reusable open-framing anchor built specifically for 2x6 top chords. It spans three trusses, locks in place with stainless detent pins, and gives crews a safe, stable tie-off point during the hardest stage to protect—before roof sheathing is installed. Rated for two users and rugged enough for everyday jobsite use, it sets spacing, speeds production, and helps maintain compliant fall protection from the moment trusses go up. Features Purpose-built for 2x6...

The Tie Down BigFoot 60060US is a non-penetrating mobile fall protection system designed to support one user under fall arrest and two under restraint simultaneously. It weighs 750 lb (U.S. model) and is engineered for use on concrete, TPO, and EPDM roof substrates without membrane penetration. It features hoist rings, a jacking mechanism, wheels, and printed operating instructions. Key Features Non-penetrating mobile fall protection system Supports 3 users: 1 in fall arrest + 2 in fall...

The Swivel-D anchor is a fully articulating anchor that rotates 360-degrees and swivels 180-degrees. It can attach to virtually any structure including steel, wood, and concrete. It is manufactured with a heavy-duty stainless-steel shackle and a zinc-plated 2.0” inside diameter forged steel D-ring. It is a highly durable anchor that can be used for either temporary or permanent installation on the interior or exterior of your building or structure. This anchor is very universal in its...