Hammers
Roofing hammers are essential to getting the job done right. Check out our selection of quality roofing hammers.
Hatchets
Your source for roofing hatchets! Estwing, AJC, Vaughan and more!
Products 1-24 of 24
Show
AJC, #005-MH Mag-Hatch Magnetic-Faced Roofing Hammer
For fast application of felt cap and roofing nails
Price: $69.99
Availability: In Stock
AJC
Item #: 114-005-MH -
Features : Powerful, shielded neodymium magnet located in striking face Handy nail claw for removing roofing and cap nails Built-in utility blade extends and retracts without use of tools Sliding guage Top grade hickory handle and high carbon steel forging
AJC 003-WSG - Magnetic Wood Shingling Hatchet
Cutting edge 2-1/8" wide
Price: $28.75
Availability: In Stock
AJC
Item #: 114-1025 -
New Magnetic Nail StarterThinner blade and lighter weight 3 Stationary gauge positionsCutting edge 2-1/8" wideHead weight: 16 oz
AJC, #002-SG100 Roofing Hatchet - Fixed Gauge
Stationary screw gauge can be set for 4”, 5” or 5 5/8” shingle exposure
Price: $34.95
Availability: In Stock
AJC
Item #: 114-1020 -
18 oz. Stationary screw gauge can be set for 4”, 5” or 5-5/8” shingle exposure. Right or left handed
Vaughan & Bushnell SH Shingling Hatchet
Polished head, milled crown face, hickory handle
Price: $34.95
Availability: In Stock
Vaughan & Bushnell Mfg
Item #: 116-1010 -
Full polished with milled, crowned face, nail slot and back blade Three-hole gauge: 4-1/2", 5", and 14.3 cm for U.S. standard and metric shingle measurement Top quality, hickory handle Rust-resistant powder coat finish MADE IN USA!
New!
Vaughan & Bushnell 1025 UL Underhill Lath Hatch, 2 1/8"...
Vaughan UL Underhill Lathing Hatchet, 14 oz., 2 1/8" extra thin blade, milled, crowned...
Price: $37.95
Availability: In Stock
Vaughan & Bushnell Mfg
Item #: 116-1025 -
Vaughan UL Underhill Lathing Hatchet, 14 oz., 2 1/8" extra thin blade, milled, crowned face, 13" wood handle. UL Underhill Lath Hatchet has extra thin blade. 2-1/8" cut. Full polished head with milled, crowned face and full-grip, select hickory handle. Rust-resistant powder coat finish. MADE IN USA. Head Weight - 14 ozOverall Length - 13-3/8"
New!
Freund, #01674000 Tinman's Hammer, PVC Sheet Metal Wedge...
Freund Tinman’s PVC Sheet Metal Mallets is perfect for old-world sheet metal crafting.
Price: $50.95
Availability: In Stock
Freund
Item #: FRE-01674000 -
Freund Tinman’s PVC Sheet Metal Mallets is perfect for old-world sheet metal crafting. Feature: Solid hickory handle.Milled PVC striking surfaces.Ergonomic handle.24 oz Dims: 16" x 6" x 2"Made in Germany ...
Picard Sheet Metal Hammer with Hickory Handle
Sheet Metal Hammer
Price: $49.95
Availability: In Stock
PICARD
Item #: WUKO-1004951 -
With double-curved hickory handle. Secure connection of forged hammer head and steel by wedge bolt Top Features: German Pattern Hammer head coated with black, corrosion resistant powderMade from alloyed PICARD Special-Steel, Carefully Hardened and temperedFace and Cross Peen ground, chamferd edgesSafe Connection Between the head and shaft by patented SecuTec Wedge Bolt Hardened handle protection Dual curved hickory handle DIN 1041 ...
New!
Picard - Medium, Soft Face, Deadblow Hammer
Soft Face/Deadblow Hammer
Price: $55.50
Availability: In Stock
PICARD
Item #: WUKO-1004936 -
Features: Comfortable Wood Handle1 5/8" Head DiameterHard Plastic Soft-face EndsEasily interchangeable nylon headsGentle on the joints and low in noiseVery wear-resistantNo chippingMade for very high impactVery secure shaft-head connection thanks to aluminum wedge and locking pinDouble curly hickory handle
Picard Tinsmith's Spengler Hammer
All-purpose metal working hammer
Price: $49.95
Availability: In Stock
PICARD
Item #: WUKO-1007160 -
Features: Cylindrical shapeMade of special plasticHigh resistance to stress crackingCan be regrinded or filedHead and handle attached with a ring wedgeDouble curved ash handle
Picard Double Headed Plumbers' Planishing Hammer, Round &...
Planishing Hammer, Round & Square
Price: $49.95
Availability: In Stock
PICARD
Item #: WUKO-1007889 -
For sheet metal, both faces flat, one round and one square, finely polished Feature: Handle Length: 12”Grey hammer effect enamelMade from alloyed Picard special steel, carefully hardened and tempered Head and handle with ring wedge fixture Ash HandleBoth channels are flatFinely PolishedOne round slightly arched channelOne flat square channelRing wedge fixtureIdeal for slaters & roofers ...
Picard Special Grooving Hammer
One Vertical Face
Price: $75.90
Availability: In Stock
PICARD
Item #: WUKO-1004977 -
One vertical face, one horizontal face, finely polished Features: Grey hammer effect enamelMade from alloyed PICARD special - steel, carefully hardened and temperedHead and handle with ring wedge fixtureAsh handleChannels different intensity and differently archedOne Vertical FaceOne Horizontal FaceFinely Polished Steel
Picard - Small, Soft Face, Deadblow Hammer
Small Soft Face/Dead Blow Hammer
Price: $53.95
Availability: In Stock
PICARD
Item #: WUKO-1007178 -
Features: Comfortable Wood Handle1 3/8" Head DiameterEasily interchangeable nylon headsGentle on the joints and low in noiseVery wear-resistantNo chippingFor very high impactVery secure shaft-head connection thanks to aluminum wedge and locking pinDouble curly hickory handleHard Plastic Soft-face Ends
New!
Picard - Planishing & Grooving Hammer
One round face, one horizontal face, finely polished
Price: $50.95
Availability: In Stock
PICARD
Item #: WUKO-1004969 -
One round face, one horizontal face, finely polished Features: Grey hammer effect enamel Made from alloyed PICARD special - steel, carefully hardened and tempered Head and handle with ring wedge fixture Ash handle Channels different intensity and differently arched One Round Face One Horizontal Face Finely Polished Steel
Ames, #20184600 True Temper Toughstrike Engineer Hammer, 4...
Price: $19.95
Availability: In Stock
Ames True Temper
Item #: 145-20184600 -
Wood Handled Sledges | #20184600 The TOUGHSTRIKE 4 lb. Engineer Hammer is proudly USA Made with US/Global components. It features a 16″ American hickory handle to reduce shock, a 4 lb. double face forged steel hammer head for maximum durability, and a wedge/ring connection for trusted head retention. Most users prefer this hammer for heavy hammering, light demolition work, and driving spikes/wedges. The TOUGHSTRIKE 4 lb. Engineer Hammer is backed by a 15 warranty. Features Double Face Head...
Picard - Large, Soft Face, Deadblow Hammer
large, soft face, deadblow hammer
Price: $64.95
Availability: In Stock
PICARD
Item #: WUKO-1014364 -
Features: Comfortable Wood Handle 2" Head Diameter Hard Plastic Soft-face Ends Easily interchangeable nylon heads Gentle on the joints and low in noise Very wear-resistant No chipping Made for very high impact Very secure shaft-head connection thanks to aluminum wedge and locking pin Double curly hickory handle
Picard Angled Hammer
Picard Hammer for Angle Flat Scraper
Price: $41.95
Availability: In Stock
PICARD
Item #: WUKO-1004944 -
Features:Wood handled angle hammer for use in tight spacesFor corner chell Iron Grey hammer effect enamel Made from alloyed Picard special steel, carefully hardened and tempered Often used in conjunction with the seaming spoon for closing seams up concave bendsTool was made for plumbers, gold and silversmiths and watchmakersWeight: 10.5 ozLarge side: 7/8″Small side: 1/8″ ...
AJC, #005-MH Mag-Hatch Magnetic-Faced Roofing Hammer
For fast application of felt cap and roofing nails
Price: $69.99
Features : Powerful, shielded neodymium magnet located in striking face Handy nail claw for removing roofing and cap nails Built-in utility blade extends and retracts without use of tools Sliding guage Top grade hickory handle and high carbon steel forging
Vaughan & Bushnell SH Shingling Hatchet
Polished head, milled crown face, hickory handle
Price: $34.95
Full polished with milled, crowned face, nail slot and back blade Three-hole gauge: 4-1/2", 5", and 14.3 cm for U.S. standard and metric shingle measurement Top quality, hickory handle Rust-resistant powder coat finish MADE IN USA!