S5 Clamps and Accessories

The S-5! S-5-S Mini Clamp is a lighter-duty version of the standard S-5-S Clamp, designed for snap-lock vertical and angle-seam (single-fold) roof profiles with limited horizontal seam projection. It features a single round-point Torx-T30 setscrew instead of two, eliminating the M8 bolt for accessories. Its compact size makes it an economical choice for mounting roof accessories like antennas, signage, conduit, lighting, or small solar mounts on compatible seams. It retains many of the...

The S-5! N Mini Clamp is a non-penetrating clamp designed for 1" nail strip standing seam metal roof profiles. It is shorter than the standard S-5-N and features one angled T-30 Torx round-point setscrew rather than two, plus an insert to ensure superior fit without damaging the seam. Ideal for lighter duty rooftop accessories. Key Features: • Fits 1" nail strip profiles with base rib dimension ≤ 0.82” (20 mm) • One angled setscrew for easier installation and a superior fit via insert •...

The S-5! U Mini Clamp is a compact, lighter-duty version of the S-5! U Clamp designed for standing seam metal roofs. It features one round-point stainless steel setscrew and no top bolt, making installation simpler and less costly while still providing secure anchoring for many rooftop accessories. Suitable for vertical and rotated horizontal seams (with appropriate seam widths), the U Mini is perfect for items like satellite dishes, signage, walkways, lighting, and conduit where full clamp...

The S-5! T Mini Clamp is a compact version of the S-5-T Clamp, designed for use on “T”-shaped standing seam roof profiles with horizontal seam dimension up to about 1.30 inches. It also fits architectural single-fold or angle-seam/horizontal seam profiles with projections of 5/8 inch (≈ 15 mm) or less. The clamp is non-penetrating, using a single round-point Torx-T30 stainless steel setscrew to grip the seam without piercing it, preserving roof finish and warranty. The “Mini” version is...

The S-5! H90 Mini Clamp is a compact version of the standard H90 Clamp, built for standing seam panels having horizontal, single-folded seams of at least 0.65″ (16.5 mm). It features one Torx T-30 round-point setscrew and one threaded bolt hole for accessory attachment. The clamp is shorter than the full-size H90, and lacks the full hardware complement. It’s ideal for rooftop accessories such as signage, lighting, solar micro-installations, conduit, and other lighter-load applications. This...

The S-5! H Mini Clamp is a two-piece, lighter-duty clamp designed for metal roof panels with horizontal seams that are not fully closed. It’s shorter than the standard H Clamp and uses a single Torx T-30 round-point side setscrew for gripping the seam. It accepts the same insert piece used on the standard H to fit wider seams up to 0.75″ (19 mm). The clamp doesn’t include the top M8 bolt (which standard H does). It is suitable for lighter rooftop accessories like signs, satellite dishes,...

The S-5! K Grip Clamp is a specialized seam clamp made for metal roofs with bulb or snap-together profiles such as KlipLok, Klip-Rib, SpeedDeck, Mirage, and similar panel types. It includes side-bolts instead of traditional setscrews to prevent roof damage and over-compression. Inserts (sold separately) allow matching the specific rib dimensions of different profiles. The clamp’s mounting bolt sits directly at the center of the seam to reduce moment arm and improve load resistance. A Mini...

The S-5! GX-10 Insert is an interchangeable insert component engineered for the S-5-K Grip clamp. It allows the clamp to securely engage a variety of bulb snap-together metal roof profiles (such as Klip-Lok®, KLIP-RIB®, SpeedDeck®, Saflok®, etc.). Each insert has a unique shape that matches a specific roof profile, enabling tighter fit, increased holding strength, and reduced risk of damage or slippage. The insert is sold separately and is required when installing the K Grip clamp on profile...

The S-5! K Grip Mini Seam Clamp is the smaller, lighter version of the standard K Grip clamp, designed for KlipLok, Klip-Rib, SpeedDeck, Mirage, and other bulb snap-together profiles. It uses one side-bolt (instead of two), a center-seam mounting bolt, and interchangeable inserts (sold separately) to match roof rib geometry. The Mini clamp is intended for mounting accessories such as lights, signage, conduit, satellite dishes, and small solar installations—not for snow retention assemblies...

The S-5! Z Mini Clamp is an economical, non-penetrating clamp designed for use on round “bulb” seam roof profiles such as Zip-Rib®, BEMO, Kalzip®, and similar. It fits seams with bulb diameters up to 7/8″ (22 mm). The clamp is a shorter version of the standard Z clamp and uses one round-point Torx-T30 stainless steel setscrew instead of two. The M8 bolt for accessory mounting is not included in the Z Mini version. Ideal for lighter rooftop accessories such as signage, conduit, cable trays,...

The S-5! GXM-10 Mini Insert is a profile-specific insert for the S-5-K Grip Mini clamp. It is engineered for bulb snap-together metal roof profiles, providing a matched interface to improve grip and reduce panel deformation. Use GXM-10 when the roof rib dimensions correspond to its supported profile list; it replaces the standard insert in the K Grip Mini to ensure proper engagement. Key Features: Purpose-built for the S-5-K Grip Mini clamp Profile-matched geometry for bulb snap-together seams...

The S-5! WindClamp 2X is designed to significantly enhance the wind uplift performance of standing seam metal roof systems. This innovative clamp attaches directly to the vertical seam, locking adjacent seam panels together to prevent disengagement during high wind events. By increasing system wind resistance, the WindClamp 2X provides building owners, contractors, and engineers with a cost-effective solution for strengthening new or existing standing seam roof systems against hurricanes,...