Slate Roofing Tools

6-position locking adjustments Constructed of heavy duty galvanized steel 10” platform Can be repositioned & taken down without damaging shingles Folds flat for convenient storage and transport Replaceable 3-position tongue Capacity: 1 worker plus 40 lbs. per 8’ staging Maximum 8’ spacing between bracket

Forged, hardened carbon steel, leather handle. Pointed end of hammer is used for punching nail holes in the slate. Slotted claw allows for pulling nails. Beveled shank on right side used for trimming slate. Round checkered face for driving nails. Wt. 26 oz. Length: 12-1/2”

Forged, hardened carbon steel, leather handle. Pointed end of hammer is used for punching nail holes in the slate. Slotted claw allows for pulling nails. Beveled shank on right side used for trimming slate. Round checkered face for driving nails. Wt. 26 oz. Length: 12-1/2”

FEATURES: Nail Puller Hand Forged Leather Handle Polished Finish Point Protection

FEATURES: Nail Puller Hand Forged Leather Handle Polished Finish Point Protection

Heavy handle with recessed grip, stainless steel blade with rounded edges, flexible spring tempered blade is easily replaced by means of two special screws, spezial holder suitable for all blade lenghts, delivery complete including assembly wrench for quick change of the blade

Preferred by Roofers who want that Extra Large Striking Surface at the Front End of the Handle Area One piece, forged carbon steel. Hardened and tempered blade. 1/8” radius area where nail can be hooked. 1” wide x 2” deep striking surface at front end of handle. Wt. 4-½ lbs. Length: 32” Blade length: 25-½”

Economy Version (Slightly Smaller Striking Surface than Heavy Duty Slate Ripper) One piece, forged carbon steel. Hardened and tempered blade. 1/8” radius area where nail can be hooked. 1 1/2” wide x 3/4” deep striking surface at front end of handle. Wt. 3.5 lbs. Length: 30 1/2”. Blade length: 24 1/2”

Super heavy duty, ergonomic grip with extra large striking surfaces on front and back Heat treated, forged carbon steel

Flat bar stock, welded construction, offers forged pointed end to be driven into a wooden surface, therefore providing stable edge for trimming slate with a slate hammer.

Curved stake is intended for use with slightly warped natural slate to allow for trimming without breaking.

Makes straight, convex, and concave cuts Cuts slates up to 5/16" thick Nail Punch is made from hardened tool steel Blade made from Alloy Steel Made in the USA Contractor quality

Featured in the Time-Life Book Series. Will cut straight lines and curvatures. Curved blade “bites” on slate up to 3/8” thick. Each full stroke cuts 3-1/2”. Blade and punch are removable and replaceable. Two included pieces of angle iron, which can be fitted to bottom section in pre-drilled screw holes for greater stability. Wt. 5 lbs. Length: 25” Cutting blade length: 4”

Handle and base are heat-treated, carbon alloy steel. 8” ribbed, concave blade provides added leverage when cutting. Heat-treated, removable punch. Cuts up to 3/8” slate. Wt. 9 lbs. Length: 22” Cutting blade length: 8”

Slate cutter, asbestos-cement and fibre-cement made out of high quality aluminium, ergonomic, light weight, with punching device

For asbestos-cement and fibre-cement A manual cutter for all kinds of slate and asbestos-cement up to a thickness of 7 mm. Ergonomically formed for an easy and fatigue-proof working. Changing blades not necessary.

Make your power drill a powerful slate-cutting shear! The Malco Turboshear Model TSNS1 quickly inserts into the chuck of most corded or cordless drills. This versatile and “portable” TurboShear requires less force than other slate-cutting methods. An operating speed of 1400 to 2000 RPM ensures optimal performance and control for making fast straight, angled or curved cuts in 4mm to 8mm natural roofing slate. Cutting slate with finished side up produces an authentic-looking, hand-cut...

Replacement blades for Malco TurboShear Slate Cutting Drill Attachment

6 position locking adjustment at 33, 38, 43, 50 and 55 degree Made of galvanized steel Easy to use with no damage to shingles or tiles Folds flat for compact storage Complies with OSHA regulations This heavy duty roof bracket adjusts and locks in six positions and accommodates roof pitches from 3/12 to 10/12. Made of galvanized steel for extra strength, safety and durability, it is easy to set up, operate, reposition and remove without damaging shingles. It also folds flat for compact storage...

Adjustable Slater's Bracket Replacement Tongue

6-position locking adjustments Constructed of heavy duty galvanized steel 10” platform Can be repositioned & taken down without damaging shingles Folds flat for convenient storage and transport Replaceable 3-position tongue Capacity: 1 worker plus 40 lbs. per 8’ staging Maximum 8’ spacing between bracket