Oatey® Galvanized No-Calk® Solar Flashings are designed for commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe. Self-sealing collar slides over pipe and requires no caulking. Oatey products have earned the trust of plumbing professionals for over 100 years. 28 gauge Galvanized steel baseCollar seals pipe ranging from 1/2 In to 1 In to accomodate solar panel mounting system postsRated 180°F continuous heat and approved for...

The Portals Plus Medium Pipe Boot White TPO 1″-6″ (POR-46209) is designed for single-pipe roof penetrations up to 6″ in diameter. It features a 70 mil TPO injection-molded body and includes an integrated Snaplock stainless steel clamp for securing the boot to the pipe. A compression-molded 60 mil EPDM or Neoprene body is included depending on base. It may be adapted for square tubing or angle-iron through optional adapters. This boot is suitable for use with TPO roofing membranes and is white...

Portals Plus 29430 is a five-hole Pipe Portal flashing cover that includes five C-555 black EPDM caps and stainless steel clamps. Designed for sealing multiple roof penetrations, it features precut port holes and molded sealing ribs for faster installation and a long-lasting, watertight connection. The EPDM rubber is resistant to ozone and UV rays and offers a wide service temperature range from −60°F to +270°F. This assembly is used in conjunction with a compatible roof curb to ensure secure...

Oatey's durable Thermoplastic No-Calk® Roof Flashings with standard bases are designed for commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe. The self sealing collar slides over the pipe and requires no caulking. Oatey products have earned the trust of plumbing professionals for over 100 years. Roof flashing slides over vent pipe for pitch to 45 degreesNon-fading, non-cracking rigid black thermoplastic baseNon-fading...

Reduces inventory: 2 multi-size flashings fit 4 pipe sizes. One flashing accommodates 1-1/2", 2", and 3" pipes; the other, 3" and 4" pipes. Ring on collar tears off, allowing flashings to seal different pipe diameters. Simply remove the inner ring at the indicated point on the collar and you'll have a perfect leakproof fit for pipes from 1-1/2" to 4". Slides over pipe - for pitch to 40 degrees. Rustproof, stamped galvanized, 24 or 28 gauge. Non-fading, non-cracking and non-rusting bases and...

The Marathon MARABOOT Universal Mara-Boot provides a permanent, watertight, and maintenance-free solution for roof penetrations. Featuring a heavy-duty aluminum base and a mechanically sealed EPDM cap, this boot delivers maximum resistance to weathering, ozone, UV, and extreme hot and cold temperatures. Each unit is designed to accommodate a wide range of pipe sizes, making it versatile for various roofing applications. Key Features: Universal EPDM cap accommodates multiple pipe sizes Aluminum...

Oatey® All-Flash® No-Calk® Roof Flashings can be used in commercial and residential applications where a watertight seal for roof penetrations around the plumbing vent pipe is required. The patented collar design allows for use on multiple pipe sizes. Oatey products have earned the trust of plumbing professionals for over 100 years. 1-1/2 in.–3 in. thermoplastic roof flashing11-1/2 in. x 15 in. non-fading, non-cracking plastic basePatented All-Flash® collar with tear-away ring for many pipe...

Oatey®Galvanized No-Calk® Roof Flashings are designed for use in commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe. The self sealing collar slides over the pipe and requires no caulking. Oatey products have earned the trust of plumbing professionals for over 100 years. Patented All-Flash® design allows use on multiple pipe sizes28 gauge Galvanized steel baseRated 180°F continuous heat and approved for Type B...

Oatey's durable Thermoplastic No-Calk® Roof Flashings with standard bases are designed for commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe. The self sealing collar slides over the pipe and requires no caulking. Oatey products have earned the trust of plumbing professionals for over 100 years. Roof flashing slides over vent pipe for pitch to 45 degreesNon-fading, non-cracking rigid black thermoplastic baseNon-fading...

Oatey®Galvanized No-Calk® Roof Flashings are designed for use in commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe. The self sealing collar slides over the pipe and requires no caulking. Oatey products have earned the trust of plumbing professionals for over 100 years. Patented All-Flash® design allows use on multiple pipe sizes28 gauge Galvanized steel baseRated 180°F continuous heat and approved for Type B...

Oatey's durable Thermoplastic No-Calk® Roof Flashings with standard bases are designed for commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe. The self sealing collar slides over the pipe and requires no caulking. Oatey products have earned the trust of plumbing professionals for over 100 years. Roof flashing slides over vent pipe for pitch to 45 degreesNon-fading, non-cracking rigid black thermoplastic baseNon-fading...

Oatey® All-Flash® No-Calk® Roof Flashings can be used in commercial and residential applications where a watertight seal for roof penetrations around the plumbing vent pipe is required. The patented collar design allows for use on multiple pipe sizes. Oatey products have earned the trust of plumbing professionals for over 100 years. 3 in.–4 in. thermoplastic roof flashing12 in. x 16 in. non-fading, non-cracking plastic basePatented All-Flash® collar with tear-away ring for many pipe...

Oatey®Galvanized No-Calk® Roof Flashings are designed for use in commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe. The self sealing collar slides over the pipe and requires no caulking. Oatey products have earned the trust of plumbing professionals for over 100 years. Patented All-Flash® design allows use on multiple pipe sizes28 gauge Galvanized steel baseRated 180°F continuous heat and approved for Type B...

Oatey® All-Flash® No-Calk® Roof Flashings can be used in commercial and residential applications where a watertight seal for roof penetrations around the plumbing vent pipe is required. The patented collar design allows for use on multiple pipe sizes. Oatey products have earned the trust of plumbing professionals for over 100 years. 1-1/2 in.–3 in. aluminum roof flashing11 in. x 14-1/2 in. base is easy to shapePatented All-Flash® collar with tear-away ring for many pipe sizesSelf-sealing...

The Aztec Washer RD101BA Extreme Angle Master Flash is a small-size flashing designed for steep metal roofs with slopes between 35° and 65°. Constructed from black EPDM, it offers long-term resistance to UV, ozone, and weathering. Its built-in 40° pitch allows for proper alignment on extreme slopes, while the flexible trim-to-fit sleeve provides a secure seal around smaller pipe penetrations. Key Features: Black EPDM construction for superior weather, ozone, and UV resistance. Built-in 40°...

Oatey® Aluminum No-Calk® Roof Flashings with rustproof stamped aluminum base are designed for use in commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe. The self sealing collar slides over the pipe and requires no caulking. Oatey products have earned the trust of plumbing professionals for over 100 years. Rustproof stamped aluminum base allows for easy shaping of flashingRated 180°F continuous heat and approved for Type B...

The Portals Plus 32015 Curb Cover w/ C-212 Cap is a pipe portal assembly that pairs a laminated, acrylic-coated ABS curb cover with an EPDM C-212 cap. The cover features an 8″ collared opening with a molded sealing ring to seat the cap. The C-212 cap includes stainless-steel Snaplock clamps for a mechanical seal to the collar. This configuration is used where multiple small pipes are routed through a single roof penetration location. Key features: Laminated, acrylic-coated ABS curb cover with...

Oatey's durable Thermoplastic No-Calk® Roof Flashings with standard bases are designed for commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe. The self sealing collar slides over the pipe and requires no caulking. Oatey products have earned the trust of plumbing professionals for over 100 years. Roof flashing slides over vent pipe for pitch to 45 degreesNon-fading, non-cracking rigid black thermoplastic baseNon-fading...

The Aztec Washer SQ301BA Standard Master Flash is a medium-to-large size pipe flashing designed for residential and commercial roofs. Constructed from black EPDM, it provides long-term resistance to UV, ozone, and weathering. The flexible sleeve accommodates vibration and pipe movement while marked trim lines allow easy on-site customization. Its soft base conforms to a variety of roof panel profiles and slopes for a secure, watertight seal. Key Features: Black EPDM material for superior...

Oatey® All-Flash® No-Calk® Roof Flashings can be used in commercial and residential applications where a watertight seal for roof penetrations around the plumbing vent pipe is required. The patented collar design allows for use on multiple pipe sizes. Oatey products have earned the trust of plumbing professionals for over 100 years. in. aluminum roof flashing12 in. x 15 in. base is easy to shapePatented All-Flash® collar with tear-away ring for many pipe sizesSelf-sealing collar slides over...

Oatey®Galvanized No-Calk® Roof Flashings are designed for use in commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe. The self sealing collar slides over the pipe and requires no caulking. Oatey products have earned the trust of plumbing professionals for over 100 years. Roof flashing slides over DWV pipe for pitch to 40 degreesMade of rust-proof, stamped 29 gauge galvanized steelNon-fading sealing collarApproved for Type B...

Oatey® Aluminum No-Calk® Roof Flashings with rustproof stamped aluminum base are designed for use in commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe. The self sealing collar slides over the pipe and requires no caulking. Oatey products have earned the trust of plumbing professionals for over 100 years. Rustproof stamped aluminum base allows for easy shaping of flashingRated 180°F continuous heat and approved for Type B...

Oatey® All-Flash® No-Calk® Roof Flashings can be used in commercial and residential applications where a watertight seal for roof penetrations around the plumbing vent pipe is required. The patented collar design allows for use on multiple pipe sizes. Oatey products have earned the trust of plumbing professionals for over 100 years. 3 in.–4 in. 28-gauge galvanized steel roof flashing12 in. x 15 in. basePatented All-Flash® collar with tear-away ring for many pipe sizesSelf-sealing collar slides...

The Extreme Angle Master Flash #1 (EA101BA) from Aztec Washer Company is engineered for steep-slope metal roofs with angles from 35° to 65°. This flexible roof flashing is built with premium EPDM rubber, resisting UV and ozone for long-lasting performance. With a built-in 40° pitch, square base that conforms to metal seams, and easy-to-read sizing marks, installation is fast, accurate, and reliable. Perfect for contractors handling challenging penetrations in high-angle roofing applications....

The Aztec Washer RD101GA Extreme Angle Master Flash is a small-size flashing for steep metal roofs with slopes from 35° to 65°. Made from gray EPDM, it resists UV, ozone, and weathering. A built-in 40° pitch and flexible, trim-to-fit sleeve provide a secure, watertight seal around smaller pipe penetrations while the compact base conforms to roof profiles. Key Features: Gray EPDM compound engineered for long-term resistance to UV, ozone, and weathering. Built-in 40° pitch adapts to steep roof...

These flashings are compounded specifically for maximum resistance weathering due to ozone and ultraviolet light. A C-12 ASTM additional requirement was added to assure conformance to the most stringent ozone/weathering specifications available The base of the flashing is designed to form a seal on most panel configurations and roof pitch regardless of pipe location. The pitch canal allows for maximum flexibility, accommodating up to a 60 degree pitch without affecting performance. Flashing...

The Portals Plus 32101 Small RC-2A Straight Sided Roof Curb (11″ High) is designed for decks with lightweight fill or tapered insulation. It is fabricated from 18 gauge galvanized steel with an integral base plate and continuously welded corner seams, includes a factory-installed wood nailer and 1.5″ thick rigid fiberglass insulation (3 lb density) on all four sides. This curb provides a versatile, leak-resistant base for pipe portal systems. Key features: 18 gauge galvanized steel...

The Portals Plus Large Pipe Boot series covers large single-pipe roof penetrations with diameters from 6″ to 12″. These boots feature a compression-molded body (60 mil EPDM or Neoprene) and include the Snaplock stainless-steel clamp to secure the pipe and flashing. Available in black or white EPDM and black neoprene to match roofing membrane finishes and system requirements. Installation should follow Portals Plus instructions and the roofing membrane manufacturer’s guidelines. Key features:...

The Portals Plus 32035 Curb Cover w/ C-481 Cap combines a laminated, acrylic-coated ABS curb cover with an 8″ collared opening and molded sealing ring, paired with the C-481 molded EPDM cap. The cap includes stainless-steel Snaplock clamps to create a mechanical seal to the collar. This assembly is specified for grouped small-diameter penetrations, accommodating up to four pipes from 3/8″ to 1″ in diameter through a single roof portal. Key features: Laminated, acrylic-coated ABS cover with 8″...

Oatey® Aurora™ No-Calk® Solar Flashings are designed for use in commercial and residential applications that require a watertight seal for roof penetrations around the piping for solar mounting systems. Self-sealing collar slides over pipe and requires no caulking. Oatey products have earned the trust of plumbing professionals for over 100 years. 1/2" to 1" Galvanized Roof Flashing28 Gauge 9.5" x 12.5" galvanized steel baseFor pitch from 0-40°Rated 180°F continuous heat and approved for Type B...

Oatey® All-Flash® No-Calk® Roof Flashings can be used in commercial and residential applications where a watertight seal for roof penetrations around the plumbing vent pipe is required. The patented collar design allows for use on multiple pipe sizes. Oatey products have earned the trust of plumbing professionals for over 100 years. Patented All-Flash® collar design allows use on multiple pipe sizesRustproof stamped aluminum base allows for easy shaping of flashingRated 180°F continuous heat...

Oatey® Aluminum No-Calk® Roof Flashings with rustproof stamped aluminum base are designed for use in commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe. The self sealing collar slides over the pipe and requires no caulking. Oatey products have earned the trust of plumbing professionals for over 100 years. Rustproof stamped aluminum base allows for easy shaping of flashingRated 180°F continuous heat and approved for Type B...

Oatey® All-Flash® No-Calk® Roof Flashings can be used in commercial and residential applications where a watertight seal for roof penetrations around the plumbing vent pipe is required. The patented collar design allows for use on multiple pipe sizes. Oatey products have earned the trust of plumbing professionals for over 100 years. Rustproof stamped aluminum base allows for easy shaping of flashingBlack powder coated baseRated 180°F continuous heat and approved for Type B installationsMetal...

The Aztec Washer SQ201BA Standard Master Flash is a medium-size pipe flashing designed for reliable sealing on residential and commercial roofs. Made from black EPDM, it resists ozone, UV rays, and weathering for long-term durability. The sleeve flexibility accommodates pipe expansion, contraction, and vibration, while trim-to-fit markings allow on-site customization. Its soft base conforms to roof panel shapes and pitches, ensuring a secure, watertight installation. Key Features: Black EPDM...

Aztec Washer RF101GP is a split, wraparound retrofit flashing for cases where a standard boot can’t slide over the top of the pipe. Made from UV- and ozone-resistant gray EPDM, size #1 covers smaller conduits and pipes and conforms to common panel profiles and roof pitches. Marked cut lines simplify sizing, snap-on fasteners speed installation, and a collar channel accepts a zip tie to finish the seal. Key Features: • Split, wraparound design for true retrofit installs — no disassembly of...

The Portals Plus 29225 C-212 Black Cap with Clamps is a molded EPDM compression cap designed to handle up to four roof pipe penetrations—two pipes sized 3/8″ to 1″ diameter and two pipes sized 1″ to 2″ diameter. It includes four stainless-steel adjustable Snaplock clamps to secure the cap around the penetrations. The flexible EPDM cap allows the penetrations to expand, contract, and vibrate independently of the roofing system, and is used in conjunction with a compatible Alumi-Flash or...

Aztec washer rf101bp is a wraparound, split-boot retrofit flashing for situations where you can’t slide a boot over the top of the pipe due to obstructions or existing equipment. made from uv- and ozone-resistant black epdm, it conforms to common panel profiles and roof pitches. clearly marked cut lines simplify sizing, and snap-on fasteners make retrofit installs quick; a collar channel accepts a zip tie to finish the seal. typical uses include roof and sidewall penetrations on metal, stucco,...

Oatey® Aluminum No-Calk® Roof Flashings with rustproof stamped aluminum base are designed for use in commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe. The self sealing collar slides over the pipe and requires no caulking. Oatey products have earned the trust of plumbing professionals for over 100 years. Rustproof stamped aluminum base allows for easy shaping of flashingRated 180°F continuous heat and approved for Type B...

The Aztec Washer RD301GA Extreme Angle Master Flash is a medium-size flashing designed for steep metal roofs with slopes between 35° and 65°. Made from gray EPDM, it resists UV, ozone, and weathering for long-term performance. The built-in 40° pitch ensures proper alignment on steep roofs, while the flexible trim-to-fit sleeve provides a watertight seal for pipe penetrations up to 5 inches. Its compact base makes it suitable for medium pipe sizes in extreme roof slope conditions. Key Features:...

The Portals Plus 29245 C-481 Black Cap with Clamps is a molded EPDM compression cap engineered to handle up to four pipe penetrations from .375″ to 1″ in diameter. It comes supplied with four stainless-steel adjustable Snaplock clamps to mechanically secure the cap around the penetrations. The flexible EPDM cap allows penetrations to expand, contract and vibrate independently of the roofing system, and is intended for use on compatible Alumi-Flash or Plasti-Flash base units (base not...

The Aztec Washer RD201GA Extreme Angle Master Flash is a medium-size flashing designed for steep roof slopes between 35° and 65°. Constructed from gray EPDM, it resists UV, ozone, and weathering for long-lasting performance. Its built-in 40° pitch ensures proper fit on extreme roof angles, while the flexible trim-to-fit sleeve provides a watertight seal for pipe penetrations from 1-1/4 in to 3 in.Key Features: Gray EPDM compound engineered for weather, UV, and ozone resistance. Built-in 40°...

Oatey® All-Flash® No-Calk® Roof Flashings can be used in commercial and residential applications where a watertight seal for roof penetrations around the plumbing vent pipe is required. The patented collar design allows for use on multiple pipe sizes. Oatey products have earned the trust of plumbing professionals for over 100 years. Roof flashing slides over DWV pipe for pitch to 40 degreesMade of rust-proof, stamped 29 gauge galvanized steelBlack Painted baseNon-fading sealing collarApproved...

The Portals Plus Small RC-2A Straight-Sided Roof Curb 18″ High (POR-38101) provides a durable mounting base for pipe portal systems on roofs with lightweight fill or tapered insulation. It measures 12″ long by 12″ wide by 18″ high and is constructed from 18-gauge galvanized steel with continuously welded seams for strength and leak prevention. A factory-installed 1.5″ thick 3 lb rigid fiberglass insulation board lines the curb walls, while a wood nailer at the top perimeter ensures secure...

Oatey® Aurora™ No-Calk® Solar Flashings are designed for use in commercial and residential applications that require a watertight seal for roof penetrations around the piping for solar mounting systems. Self-sealing collar slides over pipe and requires no caulking. Oatey products have earned the trust of plumbing professionals for over 100 years. 1/2 in. to 1-1/2 in. Galvanized Roof Flashing28 Gauge 9.5 in. x 12.5 in. galvanized steel baseFor pitch from 0-40°Rated 180°F continuous heat and...

Oatey® High-Rise® Thermoplastic All-Flash® No-Calk® Roof Flashings feature a patented design that allows use on multiple pipe sizes in commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe. Roof Flashing slides over DWV pipe for pitch to 60 degreesAll-Flash collar has tear-away ring allowing flashing to seal various pipe diametersNon-fading, non-cracking rigid black thermoplastic baseNon-fading sealing collarApproved for Type...

The Portals Plus Deck-Mate Hi-Temp Silicone Flashing is designed to seal pipe penetrations on metal roofs exposed to high-temperature environments. The compression-molded silicone boot offers exceptional heat resistance, flexibility, and weather durability. Its flexible aluminum base conforms to roof profiles for a watertight fit, accommodating pipe diameters from 0.125″ to 26″. With a service range of –100 °F to +500 °F, this flashing delivers long-lasting performance for exhaust, HVAC, and...

The Portals Plus 32025 Curb Cover w/ C-412 Cap Tan is a pre-assembled pipe portal solution designed for roof penetrations. The system comprises a laminated, acrylic-coated ABS plastic curb cover with an 8″ collared opening featuring a molded sealing ring, paired with the C-412 EPDM molded cap and stainless-steel Snaplock clamp. It is specified for roof systems where up to four pipes of 1″-2″ diameter penetrate a single location. Key features: Laminated, acrylic-coated ABS plastic curb cover...

The Portals Plus 22025 Alumi-Flash Standard Base with C-212 Black Cap is a factory-matched flashing system for multiple roof penetrations. The standard base is made from .060" spun aluminum, 4" high, with a 14" base diameter and an 8" collared opening rolled with two beaded sealing rings. The C-212 cap is a molded EPDM component that attaches to the double beads using the stainless-steel Snaplock clamp included with the cap. Together they create a mechanical, weather-tight pressure seal...