Gutter Tools

The Gutter Outlet replacement chocks for the gutter outlet toolFeatures:Long Lasting High Carbon Steel BladesHeat Treated Components & Weather Resistant Finish

The Armadillo is designed specifically to dispense smaller flashing, keeping the sharp end of the coil stored beneath the cover after cutting to keep safe and your coil protected. The Armadillo features two 1" spacer clips that allow the coil cage to hold two different size coils. A 5/16" UV protected Bungee cord that wraps around the coil stock preventing it from unraveling. It's built-in cutting edge on the cover allows the user to make a perfect straight cut. This unit features a built-in...

The Armadillo is designed specifically to dispense smaller flashing, keeping the sharp end of the coil stored beneath the cover after cutting to keep safe and your coil protected. The Armadillo features two 1" spacer clips that allow the coil cage to hold two different size coils. A 5/16" UV protected Bungee cord that wraps around the coil stock preventing it from unraveling. It's built-in cutting edge on the cover allows the user to make a perfect straight cut. This unit features a built-in...

The Big Bear Trim Coil Dispenser prevents coil from unraveling while working. To install the coil onto the dispenser just take the coil stock out of it's shipping box, place it on the dispenser, secure it with the UV protected bungee cords. These cords provide enough tension that keep the coil from unraveling but the material can still be dispensed with ease. The Big Bear features pads on the base of the dispenser to protect the coil from scratches when feeding the material. Big Bear is the...

The Malco GOPRB is a replacement blade for GOP23UK.Features:Interchangeable Dies

Designed specifically for use with Malco Gutter Outlet Saws. Tapered compression spring collar on pilot ejects metal slug.Tapered compression spring collar on pilot ejects metal slugReceive clean cuts with compression spring ejections

The Malco GSG Screw Guide works over the outside edge of rain gutter to hold and guide 1/4-inch hex head screws up to 2 in. long. An impact grade 6-inch long power drive, with a 4-1/2 inch anodized aluminum sleeve, provides easy reach to the mounting surface of eaves without marring the finish of the outside gutter edge. The power drive's hex shank fits any drill or 1/4-inch impact driver and the aluminum sleeve guide ensures support for fast, accurate screw starts and for stabilizing long...

Malco Gutter Outlet Punch and Dies make clean, accurate hole cuts in .032" (0.81mm) aluminum gutter. Ample throat clearance allows these lightweight outlet punches to work over the front edge of gutter to quickly line up cuts. Fastener holes are provided in the tool frame base for optional bench mount application. An easy ratcheting mechanism and angled punch-blade provide smooth cutting action. High carbon steel blades on punches assure long service life and are also easily replaceable. Heat...

Malco Gutter Outlet Punch and Dies make clean, accurate hole cuts in .032" (0.81mm) aluminum gutter. Ample throat clearance allows these lightweight outlet punches to work over the front edge of gutter to quickly line up cuts. Fastener holes are provided in the tool frame base for optional bench mount application. An easy ratcheting mechanism and angled punch-blade provide smooth cutting action. High carbon steel blades on punches assure long service life and are also easily replaceable. Heat...

Malco Gutter Outlet Punch and Dies make clean, accurate hole cuts in .032" (0.81mm) aluminum gutter. Ample throat clearance allows these lightweight outlet punches to work over the front edge of gutter to quickly line up cuts. Fastener holes are provided in the tool frame base for optional bench mount application. An easy ratcheting mechanism and angled punch-blade provide smooth cutting action. High carbon steel blades on punches assure long service life and are also easily replaceable. Heat...

Malco Gutter Outlet Punch and Dies make clean, accurate hole cuts in .032" (0.81mm) aluminum gutter. Ample throat clearance allows these lightweight outlet punches to work over the front edge of gutter to quickly line up cuts. Fastener holes are provided in the tool frame base for optional bench mount application. An easy ratcheting mechanism and angled punch-blade provide smooth cutting action. High carbon steel blades on punches assure long service life and are also easily replaceable. Heat...

Malco Gutter Outlet Saws make safe, fast, clean cuts in thin walled and half round gutter. Downspout fits snug and flush with gutter every time. High speed steel teeth set a 10 per-inch will not grab or twist material, even when cutting half round gutter. The pilot drill bit projects only 11mm (7/16 in.) out of the shallow 25.4mm (1 in) gutter saw cup to ensure controlled safe engagement of teeth. A tapered compression spring collar on the arbor pilot drill bit automatically ejects the metal...

Malco Gutter Outlet Saws make safe, fast, clean cuts in thin walled and half round gutter. Downspout fits snug and flush with gutter every time. High speed steel teeth set a 10 per-inch will not grab or twist material, even when cutting half round gutter. The pilot drill bit projects only 11mm (7/16 in.) out of the shallow 25.4mm (1 in) gutter saw cup to ensure controlled safe engagement of teeth. A tapered compression spring collar on the arbor pilot drill bit automatically ejects the metal...

Malco Gutter Outlet Saws make safe, fast, clean cuts in thin walled and half round gutter. Downspout fits snug and flush with gutter every time. High speed steel teeth set a 10 per-inch will not grab or twist material, even when cutting half round gutter. The pilot drill bit projects only 11mm (7/16 in.) out of the shallow 25.4mm (1 in) gutter saw cup to ensure controlled safe engagement of teeth. A tapered compression spring collar on the arbor pilot drill bit automatically ejects the metal...

Malco Gutter Outlet Saws make safe, fast, clean cuts in thin walled and half round gutter. Downspout fits snug and flush with gutter every time. High speed steel teeth set a 10 per-inch will not grab or twist material, even when cutting half round gutter. The pilot drill bit projects only 11mm (7/16 in.) out of the shallow 25.4mm (1 in) gutter saw cup to ensure controlled safe engagement of teeth. A tapered compression spring collar on the arbor pilot drill bit automatically ejects the metal...

Malco Gutter Outlet Saws make safe, fast, clean cuts in thin walled and half round gutter. Downspout fits snug and flush with gutter every time. High speed steel teeth set a 10 per-inch will not grab or twist material, even when cutting half round gutter. The pilot drill bit projects only 11mm (7/16 in.) out of the shallow 25.4mm (1 in) gutter saw cup to ensure controlled safe engagement of teeth. A tapered compression spring collar on the arbor pilot drill bit automatically ejects the metal...

The Malco Trim Nail Hole Slot Punch is perfect for adding or widening hole in vinyl or aluminum siding. The horizontal slots allow for natural expansion and contraction of vinyl siding panels. Features:Punches 5/32 x 3/4 in. Horizontal slot in materialSlot is ideal for adding or elongating nail holesWorks well in Vinyl and 0.019 gauge aluminum sidingAccommodates irregular stud spacing while working on sidingBlack Vinyl grip offering maximum user comfort ...

Use a versatile Malco J Channel cutter to make Drain Tabs, Downstream Notch cutouts, and Miter Trim cuts in vinyl channel. Light hand pressure produces a single handle click signal to ensure perfect drain tabs every time. Graduations on the upper jaws to cut a 45 degree miter for a professional finished look. Hardened All- Steel construction with rust resistant nickle chrome and black oxide finishes prolong the life of this tool. Ergonomic handle contours with an over-molded, non-slip handle...

Use a versatile Malco J Channel cutter to make Drain Tabs, Downstream Notch cutouts, and Miter Trim cuts in vinyl channel. Light hand pressure produces a single handle click signal to ensure perfect drain tabs every time. Graduations on the upper jaws to cut a 45 degree miter for a professional finished look. Hardened All- Steel construction with rust resistant nickle chrome and black oxide finishes prolong the life of this tool. Ergonomic handle contours with an over-molded, non-slip handle...

Use a versatile Malco J Channel cutter to make Drain Tabs, Downstream Notch cutouts, and Miter Trim cuts in vinyl channel. Light hand pressure produces a single handle click signal to ensure perfect drain tabs every time. Graduations on the upper jaws to cut a 45 degree miter for a professional finished look. Hardened All- Steel construction with rust resistant nickle chrome and black oxide finishes prolong the life of this tool. Ergonomic handle contours with an over-molded, non-slip handle...

Light duty tool without grips. Make a single crimp for downsizing aluminum downspouts.Features:Throat Depth: 1-1/8"Length: 8"Weight: 0.56 lbs.

The 5-Blade Duct Crimper makes factory precision crimp to join duct. Features Kush'n power grips for users comfort and reduce fatigue.Features:1-5/8 ' Throat DepthCrimps form a tight fitting jointMade in USA

Short 5-Blade Crimper produces shorter crimps for downspout and guttersFeatures:Long lasting durability hardened steel bladesHeavy Duty steel heat-treated handles will not bend from hand pressureCrimp Length: 1-1/4"

Forged cutting jaw holds edge longer and assures burr free cutPunch impressions spaced 3/8" from edge of metalNon-slip vinyl cushion grip

Features: The RAU 115 (Large) is a simple crimping tool that is used to bend metal for roof pitch transitionsA two crimp method enables the user to easily create a ”pigs ear” in the metal for clean looking transitions that are completely watertightAvoid cutting your seams and being forced to use sealant; or worse yet, jeopardize the roofs ability to resist waterTool Length: 27 5/8″Blade Length: 9 7/8″ ...

Van Mark offers a 5 in. Bracket for the Profitable Trim-A-Gutter System. Brackets provide superior holding power under all weather conditions. Designed to fit in standard 5 in. K-Style gutters. Made from Aircraft grade aluminum, the bracket also helps secure sagging gutters to the fascia boards

3 in. Anchor Screws are used with Van Mark's Trim-A-Gutter system to fasten 5 and 6 in. Trim-A-Gutter brackets, through the back of the gutter and into the fascia to accommodate the installation of the gutter hoodFeatures:Stainless Steel, will not rust or streakAnchor Screws work with 5 and 6 in. gutter hood bracketsInstall using a Bit driver or Screw driver

The Van Mark Coil Dispenser is used to hold Aluminum Trim Coil for Residential Siding, Roofing, and Gutter Installation. No unraveling coils and No wind damage are just two features that make this tool a must have for anyone in the trade. Coil Dispenser sets up fast and allows materials to be fed directly into most Brakes, Saw Tables, and Slitters, allowing the user to dispense any length needed quickly. Coil Dispenser works with QuickScore and TrimCutter for fast processing of materials down...

The easy to operate Trim-A-Gutter tool from Van Mark, forms gutter hood from any color trim coil and gutter coil to fin you installation needs. To complete the installation both 5 in. and 6 in. Trim-A-Gutter hood installation brackets are available (Sold Separately) as well as 3 in. and 3/8 in. installation screws for a complete system. Trim-A-Gutter comes complete with UniMount hardware for mounting any Van Mark Brake, or independently using Van Mark's unilegsTool custom forms industry...

Longer, shallower crimps produced with the C5 result in a tighter fitting, more self supporting, leak-proof connection in sheet metal pipe and duct. FEATURES: Carbon Steel Blades Superior compound leverage mechanism Comforable opening, spring-actuated handles, and vinyl cushioned grips Nickel plating resists elements

Snap lock plastic skirting and siding to finishing trim. Makes tabs in the cut edge of siding panel used as a finishing course at top of wall or below window. Tabs lock into utility trim. Punch raises a high projection to compensate for natural relaxation of vinyl plastic. It also works well on aluminum siding but is not recommended for steel. Features Red Vinyl Grip

Securely fastens end cap to gutter using compound leverage Adjustable depth Hardened steel jaws, grade 8 bolts, non-slip vinyl grips

Slide adjustment for throat depth allows settings from 1/4" to 5/8" (6 to 16 mm) depth. Also used to crimp end caps on gutter. Nickel plate and black oxide finish. Green grips. Formed metal cutting jaws. Not Recommended for Heavy Sheet Metal.

Downsizes for a water-tight connection Compound leverage action Hardened steel blades, grade 8 bolts, comfort vinyl grips

5 blade. Produces a double crimp that downsizes without deforming downspout; walls stay square for a tight, leakproof connection The handle opening maximizes handle leverage Ergonomically contoured, non-slip for a natural fit Easy one-hand operation including an easy open and close latch motion

Use the Malco Gutter Nail Driver with hidden hangers and 8D galvanized nails to hang aluminum or steel gutters. A non-slip ergonomic grip provides multiple positions for grasping tool and working from above or below roof overhang. Durable 2-piece steel construction plus weather resistant zinc and nickel plating assure long service life of this professional quality tool. FEATURES: Ergonomic Grip 2-piece steel Weather Resistant Zinc and Nickel Planting ...

Durable polypropylene scoop. Flexible form lets it conform to any size gutter. 4”x16” long.