Super Anchor Safety

After many requests, Super Anchor developed a twin lanyard that allows workers to use the side D-rings on their harnesses for work positioning. This lanyard is specified for use as a Fall Restraint or Work Positioning device only. Do not use for Fall Arrest, vertical suspension, window-washing or rescue. We offer 6 different models all made with 3/16” wire rope, steel thimbles and connector “O” ring. All units are hand-made in our factory in Monroe WA using state of the art swaging equipment....

Each Kit Contains: (1) 20 ft. Horizontal Lifeline kit, factory assembled with (2) hinged roof anchors, 3/8 in. cable, cable sliders, fasteners. Features: Factory Assembled3 users in fall restraint or 2 in fall arrestFasteners can be used up to 20 timesSuper Heavy Duty HLL Kit Please read and understand the manufacturer instructions before using this product Instructions+Specs ...

All Aluminum Housing SRL in 20' & 30' Lengths For Flat, Sloped and Overhead Applications Swivel Casing Connector Centrifugal Stainless Steel Braking System.Features:  #2904B 20' and #2903B 30' Lengths3/16" Galvanized CableDouble Locking Snaphook and CarabinerCustom Warning Label PackageImpact Indicator SnaphookServiceable Unit by Super AnchorComplies with ANSI Z359.14-14 Type BComplies with OSHA 1926:502 ...

The D-ShakL anchor can be mounted onto various surfaces and used in numerous ways – it is truly a universal anchor point. It is a 360-degree use anchor. Unlike other anchors, our forged D-ring is captured on the shackle with a spot-welded plate. This keeps the D-ring united with the anchor at all times, especially during installation in tough situations. The anchor is only 4.5” x 2.0” and can be mounted on the exterior or interior of structures. It can be installed onto wood framing, concrete...

After many requests, Super Anchor developed a twin lanyard that allows workers to use the side D-rings on their harnesses for work positioning. This lanyard is specified for use as a Fall Restraint or Work Positioning device only. Do not use for Fall Arrest, vertical suspension, window-washing or rescue. We offer 6 different models all made with 3/16” wire rope, steel thimbles and connector “O” ring. All unites are hand-made in our factory in Monroe WA using state of the art swaging equipment....

The Swivel-D anchor is a fully articulating anchor that rotates 360-degrees and swivels 180-degrees. It can attach to virtually any structure including steel, wood, and concrete. It is manufactured with a heavy-duty stainless-steel shackle and a zinc-plated 2.0” inside diameter forged steel D-ring. It is a highly durable anchor that can be used for either temporary or permanent installation on the interior or exterior of your building or structure. This anchor is very universal in its...

Each Kit Contains:Universal Fit Harness:Fall Indicator LabelsWarning/Inspection Labels English-French-SpanishQuick Connect Adjuster BucklesPolyester webbingMax User Weight: 340 lbs.Maxima Lifeline:50ftx 5/8” 3 strand Copolymer CSA Z 259.11-05 Class F-Lanyard ANSI Z 359.1-07/OSHA 1926:502 Mfg. in the USA Aluminum Swage Eye Splice w/ Adhesive PVC cover10,500lb strength ratingEnglish-French-Spanish Warning LabelInspection LabelMechanical Rope Grab:Zinc plated steel dual locking camFactory...

Super Anchor Safety Ladder Leash, secures your ladder from movement. Simply wrap the leash around each leg of the ladder, nail or screw the nail plate and the clinch it up. Features:Easy to useMinimizes side-to-side slippageSolid zinc cam bucklesWorks with most roofing materialHelps prevent marring of gutters and roof edgesSold in Pairs* Does not nail or screw into clay or masonry tile * ...

After many requests, Super Anchor developed a twin lanyard that allows workers to use the side D-rings on their harnesses for work positioning. This lanyard is specified for use as a Fall Restraint or Work Positioning device only. Do not use for Fall Arrest, vertical suspension, window-washing or rescue. We offer 6 different models all made with 3/16” wire rope, steel thimbles and connector “O” ring. All unites are hand-made in our factory in Monroe WA using state of the art swaging equipment....

The Energy Absorber is one of the most critical components for fall protection and is required by OSHA when workers are exposed to a free fall hazard. Designed to limit maximum arrest forces while slowing the descent, our absorbers feature patented domestic manufactured tear webbing and the highest quality connectors. MAX Force personal energy absorbers are manufactured at our factory in Monroe, WA and are ensured for component compatibility with all Super Anchor Safety Personal Protection...

After many requests, Super Anchor developed a twin lanyard that allows workers to use the side D-rings on their harnesses for work positioning. This lanyard is specified for use as a Fall Restraint or Work Positioning device only. Do not use for Fall Arrest, vertical suspension, window-washing or rescue. We offer 6 different models all made with 3/16” wire rope, steel thimbles and connector “O” ring. All unites are hand-made in our factory in Monroe WA using state of the art swaging equipment....

Each Kit Contains: (1) 20 ft. Horizontal Lifeline kit, factory assembled with (2) hinged roof anchors, 3/8 in. cable, cable sliders, fasteners, and cargo bag. Features: Factory Assembled3 users in fall restraint or 2 in fall arrestFasteners can be used up to 20 timesCargo Carrying BagSuper Heavy Duty HLL Kit Please read and understand the manufacturer instructions before using this product Instructions+Specs ...

The Super Anchor Hinged Roof Anchor is a reusable roof anchor that is designed to install quickly to almost any pitched roof and can even be installed flatFeatures:  5000 lb. anchor point Variable pitch roofs Fasteners included for Fall Arrest rating Use fasteners only onceHeavy-duty 11 ga. Steel Complies with all applicable OSHA & ANSI Standards Please read and understand the manufacturer instructions before using this product.Instructions ...

For Asphalt Shingle, Wood, Copper, Slate, Metal and "Simulated Tile" Metal Roofs Strap Length 13" / Total Length 18" Includes 8 stainless steel spiral nails for permanent installation Many older and recently constructed homes do not have roof anchors – so the Retro-Fit Anchor is the perfect solution. The anchor is designed to be installed by removing only a portion of the ridge and does not require a conventional flashing system. Use over asphalt shingle, wood shake or metal roofing, the butyl...

For Tile Strap Length 353" / Total Length 4018" Includes 8 stainless steel spiral nails for permanent installation Many older and recently constructed homes do not have roof anchors – so the Retro-Fit Anchor is the perfect solution. The anchor is designed to be installed by removing only a portion of the ridge and does not require a conventional flashing system. Use over asphalt shingle, wood shake or metal roofing, the butyl flashing strip attached to the underside of the anchor will provide...

This is a single sided D-ring anchorage device that are installed at the ridge, hip-ridge or in the field for permanent or temporary use. Permanent use anchors are supplied with stainless steel nail fasteners and a butyl strip flashing. The 8-1/2” length is idea for shingle type roofs allowing the anchor to be attached over the roofing material. The RS-10 is exactly ½ of our RetroFit anchor, making it an ideal complimentary anchor for hip ridges and shed roofs. Available with a “Dual Hole”...

Want another valuable tool that’s more than just a safety device? The Safety Bar not only provides a sturdy tie-off point, but also accurately spaces your top chords 24” o.c. And we built this bar to last! It spans 3 trusses at the same time and can be rolled down the roof as the trusses are placed. Utilize numerous bars to provide multiple tie-off points. The Safety Bar is made from cold rolled steel and powder coated bright red. The top chord sockets are held in place using the same high...

The RS20 anchor is a permanent roof anchor designed specifically for tile, slate, wood and synthetic roofing materials. It can also be used as a temporary fall protection anchor using factory supplied screws. It can be installed on the roof, floor or wall. The dual-hole RS-20 accepts our WS Series and hex head screws. Temporary Use on Roofs, Walls and FloorsNumerous Fastening Options to Choose FromRated for 5,000 OSHA Fall ArrestTile UsePlease read manufacturer instructions before using this...

Super Anchor Safety’s Suspension Trauma Emergency Preparedness (S.T.E.P.) is a simple device that can save your life just minutes after your harness saved your life. You have about 15 minutes before your body can be overcome with Suspension Trauma Syndrome. What is this? When someone falls in a harness and is suspended for a period of time blood will begin to pool in the legs and sometimes in less than 5 minutes the person can faint. The situation becomes more dangerous because the harness leg...

The Moveable ARS Anchor follows the same design principles as our ARS Permanent Roof Anchors. This is designed for the framing tradesmen that need a quick, easy anchorage connector for their lanyards, lifelines or SRL’s. Made from 11-gauge steel that is powder coated. Comes with a 3/8” stainless steel detent pin with elastic tether. Heavy Duty 11-gauge steel construction2 models cover 2×4 trussesStainless Steel locking detent pinRated for OSHA Fall ArrestPowder Coated for Durability Truss...

The Moveable ARS Anchor follows the same design principles as our ARS Permanent Roof Anchors. This is designed for the framing tradesmen that need a quick, easy anchorage connector for their lanyards, lifelines or SRL’s. Made from 11-gauge steel that is powder coated. Comes with a 3/8” stainless steel detent pin with elastic tether. Heavy Duty 11-gauge steel construction2 models cover 2×12 trussesStainless Steel locking detent pinRated for OSHA Fall ArrestPowder Coated for Durability Truss...

Truss BarDesigned for production builders who want a robust anchor point during the framing and construction of the home but do not want to leave anything permanently attached to the structure. The decking is installed over the top of the anchor but the tie off straps stay exposed to the outside protecting all trades from fall hazards. It can also be utilized in a similar fashion to the Safety Bar. Here is how it works: Install the Truss Bar onto truss at predetermined locationsUse for fall...

3' Tie-Off / Cut Off Straps Feeds through or in-between sheeting All trades post sheeting have a tie-off point

The Vertical Wall anchors are designed for exterior wall applications as an overhead anchorage device that is nearly invisible from the ground. Fabricated from 11-gauge 430 stainless steel in two models to adapt to varying slope roofs. The install at the wall plate and top chord junction with a single bolt and 4 16d vinyl sinkers that are supplied with each anchor. Perfect for siders, window installers and painters. Can be painted for minimum visual effect. Designed to accommodate the bird...