Products 1-16 of 16
Show
OMG ACCUSEAM-BOOT AccuSeam Boot Only
Ergonomic design minimizes operator fatigue.
Price: $1,199.95
Availability: In Stock
OMG Item #: OMG-ACCUSEAM-BOOT -

    The stand-up OMG AccuSeam System mechanically attaches PVC & TPO systems. It provides the lowest installed cost for mechanical attachment. In one step, the lap plate is placed in position by the AccuSeam tool as the laborer drives the fastener, eliminating the need for one laborer (where normally two would be required), thereby increasing productivity. This simple and easy-to-operate tool minimizes operator fatigue as it eliminates the constant bending-over method of fastening.Ergonomic design...

    OMG ATBOOT AccuTrac Boot Only
    The depth adjustment ring eliminates over-driving and under-driving of fasteners while...
    Price: $899.95
    Availability: In Stock
    OMG Item #: OMG-ATBOOT -

      The OMG AccuTrac System provides the lowest installed cost for mechanical insulation attachment. This simple and easy-to-operate tool minimizes operator fatigue as it eliminates the constant bending-over method of fastening. In one step, the insulation plate is placed in position by the AccuTrac tool as the laborer drives the fastener, eliminating the need for one laborer (where normally two would be required), thereby increasing productivity 50%.The depth adjustment ring eliminates...

      OMG Heat Sink Magnets- 6PK
      Ensrure Strong Bond
      Price: $1,895.00
      Availability: In Stock
      OMG Item #: OMG-RBM003-6PK -

        The Rhino Heat Sink Magnets are made with a proprietary polymer that provides improved thermal properties, allowing for a more efficient transfer of heat from a welded plate to the ambient air. After the Rhino Bond Tool has cycled and performed, this Heat Sink Magnet is placed over the weld for a maximum of 45 seconds to assure a strong bondMagnet Alignment: It is important that the alignment of the magnet completely covers the welded plate, mis-alignments may result in less than perfect...

        OMG RB-HW RhinoBond Hand Welder
        The stand-alone hand welder weighs approximately 6 lbs., for easy application across the...
        Price: $4,420.00
        Availability: In Stock
        OMG Item #: OMG-RB-HW -

          This lightweight, portable induction welder is designed for use welding RhinoBond Plates in hard to reach areas on the roof such as under rooftop equipment and on vertical surfaces. Based on patented Sinch Technology, the new stand-alone RhinoBond Hand Welder is ergonomically designed and has a vibrating handle feature and an indicator light to let users know when the tool is activated and when the weld cycle is complete. The base features a recessed centering design to help users properly...

          New!
          OMG RBT007 Rhinobond® with Optiweld™ Technology (1/ 6pk of...
          OptiWeld technology eliminates the calibration process by automatically monitoring the...
          Price: $10,400.00
          Availability: In Stock
          OMG Item #: OMG-RBT007 -

            OMG has introduced a New RhinoBond tool with OptiWeld Technology, providing automatic calibration on membrane up to 80 mils. OptiWeld technology eliminates the calibration process by automatically monitoring the temperature of the RhinoBond Plate during the welding cycle to assure the best bond possible. This saves valuable time and labor for contractors the daily set-up process. Key Features: OptiWeld Technology automatically calibrates the tool to provide the correct amount of energy...

            OMG RTBOOT RhinoTrac Boot Only
            Depth adjustment ring eliminates overdriving or under-driving fasteners, while providing...
            Price: $2,485.49
            Availability: In Stock
            OMG Item #: OMG-RTBOOT -

              OMG RhinoTrac provides the lowest installed cost for mechanical insulation attachment. RhinoTrac simultaneously drops a RhinoBond plate and drives the fastener, saving both time and manpower. This easy-to-operate tool minimizes operator fatigue as it eliminates continual bending or kneeling to drive screws. It's a simple way to dramatically increase your rooftop productivity.Depth adjustment ring eliminates overdriving or under-driving fasteners, while providing consistent vertical alignment....

              Ships Free!
              OMG Roofing Products Olyfast PaceCart 3 Insulation...
              Can dispense enough OlyBond500 to apply 60 squares of insulation per hour
              Price: $10,250.00
              Availability: In Stock
              OMG Item #: OMG-OB500PCART3 -

                The new OMG PaceCart 3 offers a variety of benefits to contractors that make it more robust and easier to use. The PaceCart 3 provides the lowest installed cost method for applying OlyBond 500 insulation adhesives, and the fastest low-pressure application in the market. It features a 30 ft. hose for maximum reach and maneuverability on the roof. This unit is capable of dispensing enough OlyBond 500 to apply 60 squares of insulation per hour.Features:Improved Manifold:Ergonomically designed...

                Rooftop Equipment Vee Manifold 2-Part Adhesive Applicator
                Molded Urethane Body and Anodized Steel Threads
                Price: $284.75
                Availability: In Stock
                Rooftop Equipment Item #: 131-VEE -

                  The Vee Manifold is the better way to apply 2-part adhesives!Adhesive Flow is the key to a 2-part adhesive application. If the manifold becomes clogged, precious production time is lost. With the Vee Manifold, the flow path is straight, unlike traditional manifolds that can have multiple 90* bends that make cleaning dried adhesive impossible. A drill can quickly and easily restore flow to a clogged tube with the Vee manifold.Straight Flow Path: Reduces CloggingAllows for Easy Clean...

                  New!
                  Rooftop Equipment Vee Manifold 2-Part Adhesive Applicator...
                  Molded Urethane Body and Anodized Steel Threads
                  Price: $327.10
                  Availability: In Stock
                  Rooftop Equipment Item #: 131-VEE-Y -

                    The Vee Manifold is the better way to apply 2-part adhesives!Adhesive Flow is the key to a 2-part adhesive application. If the manifold becomes clogged, precious production time is lost. With the Vee Manifold, the flow path is straight, unlike traditional manifolds that can have multiple 90* bends that make cleaning dried adhesive impossible. A drill can quickly and easily restore flow to a clogged tube with the Vee manifold.Straight Flow Path: Reduces CloggingAllows for Easy Clean...

                    Rooftop Equipment Premium Vee Manifold 2-Part Adhesive...
                    Constructed with an All Aluminum Body and 2 Zerk Grease Fittinngs
                    Price: $495.85
                    Availability: In Stock
                    Rooftop Equipment Item #: 131-VEE-PREM -

                      The Vee Manifold is the better way to apply 2-part adhesives!The patented Vee Manifold is constructed with simple straight flow paths that allow a free flowing stream of liquid components for 2 part adhesive application. Straight flow paths allow fro less downtime. No need to disconnect hoses to restore flow interruptions. Quickly remove clogs with provided 12 in. drill bitStraight Flow Path:Reduces CloggingAllows for Easy Clean OutFeatures:60% lighter than other manifoldsAnodized Aluminum...

                      New!
                      Rooftop Equipment Premium Vee Manifold 2-Part Adhesive...
                      Constructed with an All Aluminum Body and 2 Zerk Grease Fittinngs
                      Price: $532.35
                      Availability: In Stock
                      Rooftop Equipment Item #: 131-VEE-PREM-Y -

                        The Vee Manifold is the better way to apply 2-part adhesives!The patented Vee Manifold is constructed with simple straight flow paths that allow a free flowing stream of liquid components for 2 part adhesive application. Straight flow paths allow fro less downtime. No need to disconnect hoses to restore flow interruptions. Quickly remove clogs with provided 12 in. drill bitStraight Flow Path:Reduces CloggingAllows for Easy Clean OutFeatures:60% lighter than other manifoldsAnodized Aluminum...

                        Sale!
                        OMG OB500SS-R OlyBond500 SpotShot Dual-Action Polyurethane...
                        Case of 4 Sets
                        Price: $395.00
                        Availability: In Stock
                        OMG Item #: OMG-OB500SS-R -

                        OlyBond500 SpotShot is a fast-acting, dual-component, low-rise polyurethane foam adhesive designed to attach insulation to roof decks. SpotShot is dispensed through a portable 1:1 applicator and is perfect for crickets, smaller roofs, hard to reach areas, and repairs. SpotShot does not create any odors or noise that might disturb building occupants. Packaged in a box of (4), 1,500 ml cartridge sets.

                        OMG OlyBond500 Canister Kit Polyurethane Foam Adhesive
                        Parts 1 and 2
                        Price: $1,395.00
                        Availability: In Stock
                        OMG Item #: OMG-OB500-CAN-KIT -

                        OlyBond500 Canisters are an easy-to-use, equipment free, option for applying OlyBond500 Adhesives. The Canisters have all of the same Factory Mutual approval ratings as our other OlyBond500 options, and can be used for securing both insulation and fleece backed membrane. Features & Benefits OlyBond500 Canisters offer fast start-up and shut down for improved rooftop productivity.OlyBond500 Canisters can provide up to 20% more coverage and up to 35 squares per set for insulation attachment,...

                        AES Raptor AB-O2, Self-Cleaning Two-Part Adhesive...
                        Self cleaning system eliminates the need for continuous product flow
                        Price: $1,125.00
                        Availability: In Stock
                        Leading Edge Safety Item #: AES-AB-O2 -

                          Introducing the AB-O2 Roofing Equipment Made Simple–The AB02–The world’s first and only self cleaning adhesive applicator. When the hand valve is in the off position, compressed air quickly pushes product through to the tip. This means you won’t need to constantly change tips every time you need to pause the system.This means you won’t need to constantly change tips every time you need to pause the system. With decreased consumables, reduced downtime and increased productivity, the AB02 is the...

                          Sale!
                          RACE 2-Part Adhesive Stepped Mix Tip, 20 Count with...
                          Bundle of 20 Mix Tips for 2-Part Adhesive Manifold Gun
                          Price: $42.95
                          review-star review-star review-star review-star review-star
                          (1)
                          Availability: In Stock
                          RACE Item #: RACE-MIXTIP-20 -

                            The RACE Mix Tips features simple twist-lock mounting. The RACE Mix Tips' first element automatically aligns itself precisely with the dividing wall of any compatible cartridge, separating Part A and Part B. As a result of this design, the RACE Mix Tip prevents curing at the interface of the cartridge. The RACE Mix Tip can mix virtually any 2-part material including epoxies, silicones, urthanes, acrylics and polyesters. Features: Bell mouth with ergonomic twist lock Easy to use Stepped end...

                            Malco 2 in 1 Hand Riveter
                            One hand operation with normal squeezing action provides enough pulling power to set all...
                            Price: $79.95
                            Availability: In Stock
                            Malco Products Item #: MAL-2IN1 -

                              One hand operation with normal squeezing action provides enough pulling power to set all popular size rivets. 2-in-1 adjustment features a single long stroke for most hand riveting applications and a short "ratchet action" power stroke for setting larger diameter rivets. Outside jaw-grip adjustment wheel opens and closes jaws with fingertip ease to fit any size mandrel and to obtain maximum stroke efficiency. Professional slim nose allows 2-in-1 to go where other hand riveters cannot. Ideal...

                              Best Sellers

                              Sale!
                              RACE 2-Part Adhesive Stepped Mix Tip, 20 Count with...
                              Bundle of 20 Mix Tips for 2-Part Adhesive Manifold Gun
                              Price: $42.95
                              review-star review-star review-star review-star review-star
                              (1)

                              The RACE Mix Tips features simple twist-lock mounting. The RACE Mix Tips' first element automatically aligns itself precisely with the dividing wall of any compatible cartridge, separating Part A and Part B. As a result of this design, the RACE Mix Tip prevents curing at the interface of the cartridge. The RACE Mix Tip can mix virtually any 2-part material including epoxies, silicones, urthanes, acrylics and polyesters. Features: Bell mouth with ergonomic twist lock Easy to use Stepped end...

                              Rooftop Equipment Vee Manifold 2-Part Adhesive Applicator
                              Molded Urethane Body and Anodized Steel Threads
                              Price: $284.75

                              The Vee Manifold is the better way to apply 2-part adhesives!Adhesive Flow is the key to a 2-part adhesive application. If the manifold becomes clogged, precious production time is lost. With the Vee Manifold, the flow path is straight, unlike traditional manifolds that can have multiple 90* bends that make cleaning dried adhesive impossible. A drill can quickly and easily restore flow to a clogged tube with the Vee manifold.Straight Flow Path: Reduces CloggingAllows for Easy Clean...

                              Sale!
                              OMG OB500SS-R OlyBond500 SpotShot Dual-Action Polyurethane...
                              Case of 4 Sets
                              Price: $395.00

                              OlyBond500 SpotShot is a fast-acting, dual-component, low-rise polyurethane foam adhesive designed to attach insulation to roof decks. SpotShot is dispensed through a portable 1:1 applicator and is perfect for crickets, smaller roofs, hard to reach areas, and repairs. SpotShot does not create any odors or noise that might disturb building occupants. Packaged in a box of (4), 1,500 ml cartridge sets.

                              Rooftop Equipment Premium Vee Manifold 2-Part Adhesive...
                              Constructed with an All Aluminum Body and 2 Zerk Grease Fittinngs
                              Price: $495.85

                              The Vee Manifold is the better way to apply 2-part adhesives!The patented Vee Manifold is constructed with simple straight flow paths that allow a free flowing stream of liquid components for 2 part adhesive application. Straight flow paths allow fro less downtime. No need to disconnect hoses to restore flow interruptions. Quickly remove clogs with provided 12 in. drill bitStraight Flow Path:Reduces CloggingAllows for Easy Clean OutFeatures:60% lighter than other manifoldsAnodized Aluminum...