Clearance Specials

Features: Patterned after the 30 gallon patch kettle Can be ordered with rear skid assembly or 4 additional 12 x 3 wheels Collapsible handles on both ends for easy maneuvering Includes regulator, gauge, LP burner and LP hose 4" stem thermometer Draw off cock Hoisting rings Specifications: Height 47" Width 32" Length 60" 4 - 12 x 3 wheels Shipping weight: 712 lbs ...

Common Kettle Features: 8 HP Honda engines standard - others available upon request 18" stem thermometer 2 - J3 burners developing up to 1,000,000 BTU each Propane lighting wand and quick fittings standard Burners lock in place to prevent movement during travel All hoses, regulators and fittings included Fire and exhaust flues are both .250 wall for longer life Heavy duty 6" channel construction throughout Buddy bearing type wheel hub lubrication Road rated radials Tail lights and reflectors...

Elbow for ABS or PVC Roof Drains-Used when installing a roof drain into a rood deck with a confined attic space below, such as a wood frame construction

Using Portal's Retrofit Adapters, projections with unusual shapes can be flashed in a positive and secure mannerWhen Using an Adapter- Fit the Adapter around the penetration- Fit into the appropriate step of the retrofit boot (not included)- Tighten the clamp (not included)

Heat treated blade for longer lasting and smoother cutCuts PVC/abs plastics, tubing or fiberglass, wallboard, plywoods

Laminated, Acrylic Coated, ABS plastic Curb Cover with pre-punched holes and molded sealing ring.*Curb and Caps not included*

Tire Type: Flat FreeTire Size: 13 x 5.00 - 6 in.Tire Diameter: 13.3Tire Width: 4.5 in.Rim Diameter: 6 in.Load Capacity: 400 lbs.Weight: 8.5 lbs.

Tire Type: PnumaticTire Size: 13 x 5.00 - 6 in.Tire Diameter: 13.3Tire Width: 5 in.Rim Diameter: 6 in.Load Capacity: 350 lbs.Weight: 7 lbs.

This tire is commonly used on contractor grade wheelbarrows, garden trailers, roofing equipment, spreaders and more.Tire Type: PneumaticTire Size: 4.80 / 4.00 - 8 in.Tire Diameter: 15.5Tire Width: 3.9 in.Rim Diameter: 8 in.Load Capacity: 400 lbs.Weight: 6.5 lbs.

Using Portal's Retrofit Adapters, projections with unusual shapes can be flashed in a positive and secure mannerWhen Using an Adapter- Fit the Adapter around the penetration- Fit into the appropriate step of the retrofit boot (not included)- Tighten the clamp (not included)

Using Portal's Retrofit Adapters, projections with unusual shapes can be flashed in a positive and secure mannerWhen Using an Adapter- Fit the Adapter around the penetration- Fit into the appropriate step of the retrofit boot (not included)- Tighten the clamp (not included)

Using Portal's Retrofit Adapters, projections with unusual shapes can be flashed in a positive and secure mannerWhen Using an Adapter- Fit the Adapter around the penetration- Fit into the appropriate step of the retrofit boot (not included)- Tighten the clamp (not included)

Using Portal's Retrofit Adapters, projections with unusual shapes can be flashed in a positive and secure mannerWhen Using an Adapter- Fit the Adapter around the penetration- Fit into the appropriate step of the retrofit boot (not included)- Tighten the clamp (not included)

Using Portal's Retrofit Adapters, projections with unusual shapes can be flashed in a positive and secure mannerWhen Using an Adapter- Fit the Adapter around the penetration- Fit into the appropriate step of the retrofit boot (not included)- Tighten the clamp (not included)

Using Portal's Retrofit Adapters, projections with unusual shapes can be flashed in a positive and secure mannerWhen Using an Adapter- Fit the Adapter around the penetration- Fit into the appropriate step of the retrofit boot (not included)- Tighten the clamp (not included)

Using Portal's Retrofit Adapters, projections with unusual shapes can be flashed in a positive and secure mannerWhen Using an Adapter- Fit the Adapter around the penetration- Fit into the appropriate step of the retrofit boot (not included)- Tighten the clamp (not included)

Using Portal's Retrofit Adapters, projections with unusual shapes can be flashed in a positive and secure mannerWhen Using an Adapter- Fit the Adapter around the penetration- Fit into the appropriate step of the retrofit boot (not included)- Tighten the clamp (not included)

Portal's Plus cast aluminum Underdeck clamp holds the drain bowl securely to the deck

Features: Choose rubber or steel wheels Removable bucket Comes standard with fenders - no fenders is an option Specifications: 2 - 10 x 175 wheel assemblies with 5/8" roller bearing (standard) 2 - 10" steel wheels (option) Shipping weight: 50 lbs

2" to 2" Drain coupler/connector with 2 stainless steel clampsUsed in all types of in-house and sewer connectionsLeak proof / Rust proofFlexible molded PVCConnects to pipes the same or different size and materials

Features: Steel wheels Removable bucket Comes standard with fenders - no fenders is an option Specifications: 2 - 10 x 275 wheel assemblies with 5/8" roller bearing (standard)Shipping weight: 59 lbs

3" to 3" Drain coupler/connector with 2 stainless steel clampsUsed in all types of in-house and sewer connectionsLeak proof / Rust proofFlexible molded PVCConnects to pipes the same or different size and materials

Size: 4 x 8

1 1/2" Male Fitting On One End

6" to 6" Drain coupler/connector with 2 stainless steel clampsUsed in all types of in-house and sewer connectionsLeak proof / Rust proofFlexible molded PVCConnects to pipes the same or different size and materials

The Guardian Minotaur Anchor is a dual adjusting anchor for steel beams that is designed to fit beams from 12 in. all the way up to 30 in. wide and 2-1/2 in. thick. The Minotaur Anchor is no tools necessary, easy to use, lightweight, strong and Meets all applicable OSHA and ANSI standardsFeatures:High Strength Load BarAdjustment Clamps and TogglesAdjustable D-Ring w/ 180 degree SwivelLightweightSuperior StrengthMeets all applicable OSHA and ANSI standardsMinotaur Anchor Instructions ...

Clamps hot pipe to guard rail Comes with eyelet for kettle rope

Lucas #1000MB Elastomeric Base Coating is a roof coating intended for application to built-up and modified bitumen roofs. Lucas #1000MB is formulated specifically for improved adhesion to these two substrates. A high degree of rubber-like elasticity allows this product to accommodate wide swings in temperature and significant building movement. Lucas #1000MB must be top- coated with Lucas #1000TC. Lucas #1000MB is formulated from 100% acrylic polymers developed specifically for adhering to...

Features: Adjustable for 36" and 40" material and flow Heavy duty aluminum construction Easy loading rolls Parking brakeSpecifications: 44 gallon capacity Shipping weight:: 120 lbs

Features: Mop any pattern up to 48" Use for strip mopping through floor coating Inner metal debris screen Adjustable opening every inch Economic and versatile Standard width 40" Optional width 48" Specifications: 30 gallon capacity 2 - 480 x 8 wheel assemblies with 1" roller bearing 40" shipping weight: 110 lbs 48" shipping weight: 120 lbs ...

Features: Flow control lever with adjustable stop No more valve rods to adjust Change between 36" and 40" strips using the supplied plugs 35 gallon capacity Steel chain mop included Lid to eliminate spillage Adjustable handle option for push or pull operation Strainer basket Optional 48" widthSpecifications: 2 - 480 x 8 wheel assemblies 1 - 10 x 275 wheel assembly Shipping weight: 154 lbs ...

Designed for Re-roofing application when a clamping ring is important to secure single-ply two-ply membranes in waterproof systems.O.D 13-1/2"I.D 12-3/44 lbs.

Frames fit any aluminum or wood pin type mop handle. Use with roller mop rollers for all types of coatings. *Requires mop adapter-pin type, roller mop roller, and mop handle (not included)

Replacement chalkline cord

Replacement line for Reel fast chalk line

Size: 4.10 x 3.50 x 4

Size: 4.10 x 3.50 x 6

YOUR LADDER, SAFER. Every year, more than 164,000 people visit the emergency room due to a ladder related injury, 300 of which are fatal. LadderAnchor is a base for your extension ladder that reduces the chances of your ladder slipping or tipping. FEATURES:Penetrating SpikesWhile used in soil, grass, or any soft surface, this side of LadderAnchor provides superior slip resistance. Slip Resistant RubberWhen on hard surfaces, use the slip-resistant rubber side to keep your ladder planted. Easy...

Long handle hoisting wheel designed for raising job site materials using any extension ladder. Comes with locking pins. Accommodates 3/4" or 1" rope (not included). Handle extends 26" and wheel is 12" diameter.

A "roller-bearing" pipe support used to support roof-mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a self-lubricating polycarbonate resin roller rod and roller. The pipe support base is made of polycarbonate resin, the roller rod is made of glass-filled nylon, and all metal parts are made of stainless steel. Pipestand will accommodate up...

Black Rhino Lo Pro Hacksaw is designed to hack into those hard to reach place Another feature that assists it's versitility is it's 2-way cutting angle Industrial Strength Lo-profile style hacksaw

Panther 5 Gallon Asphalt Bucket

Panther 8 Gallon Asphalt Bucket

Outside corners provide a guaranteed, uniform, permanent corner seal. Corners eliminate the cutting, folding, stretching and cementing of materials into unnatural shapes. Outside Corners have expansion radii molded into the spine to accommodate construction irregularities. All edges are feathered to allow the best possible adhesion. Outside Corners are available with or without cant and are the true answer to flashing roof curbs and skylight corners. Inside Corners simplify the difficult...

Ultra-Cool polyester meshZipper front closure2'' wide reflective material with 3'' breathable contrasting colorLeft chest mic tab6 pocketsTwo lower outside patch pockets with flapsRight chest 2-tier pencil pocketLeft chest radio pocket with flapTwo inside patch pockets