Fall/Winter Products

Latex dipped glove with hi-visibility fleece line and black micro-foam latex palm. A 10 gauge high-visibility knitted shell and winter fleece lining support dexterity and warmth, while the knit cuff helps secure the fit. Available in Medium, Large, and X-Large. Key features: His-Vis Fleece Lined Black Latex Palm Hides Dirt Pre-Curved Design Promotes Easy Flexing Comfortable Fit

The Arctic Warmers Caulk Warmer is an insulated warming bag designed to keep caulk and other temperature-sensitive materials warm and ready in cold conditions. It uses an electric heating element combined with thermal-reflective insulation to maintain internal temperatures up to approximately 115°F while outside temperatures are low. This 12-tube capacity warmer helps contractors maintain material usability for adhesives, sealants, grease cartridges, and similar products during cold-weather...

GreenSlope is a new roofing material made from recycled products designed to reduce the depth of water ponding areas on flat rooftops. Made from Non-Biodegradable materials its built to withstand harsh weathering and last a long time. It's unique properties allow it to be shaped and built up to redirect water towards drainage areas. GreenSlope is easy to work with and can be applied to almost any roof surface, commercial or residential. It can be use around Low Drains, near Scupper and Edges,...

The Red Dragon® RD 6009 Roof Dryers defrost, dry and get you back on the job with minimum effort. Our rugged design and user-friendly features make them the perfect choice for professional roofing contractors. Use them to dry surfaces after ponding water has been removed or to remove morning dew, frost or light debris. The Roof Dryers work by combining high heat (up to 350º F) and a 200 mph airstream to facilitate quick drying and reduce costly downtime. There are no electrical cords or danger...

The Arctic Warmers 20 lb Cylinder Warmer Wrap is an insulated heating wrap for 20 lb propane or foam cylinders. It uses a heat-reflective flexible barrier and closed-cell insulation inside a heavy-duty nylon shell to help maintain consistent warmth around the cylinder in cool or cold conditions. The wrap features adjustable Velcro closures and cinch straps for a secure fit and includes a cord storage pocket for organized jobsite setup. Key Features Designed to fit 20 lb propane or foam...

The Arctic Warmers 5-Gallon Pail Warmer is an insulated wrap designed to maintain consistent internal temperatures for materials stored in standard 5-gallon buckets or pails. It combines a heat-retaining flexible barrier with durable insulation and an automatic thermostat to help keep adhesives, coatings, and other temperature-sensitive materials workable in cold weather. This warmer wraps securely around the container and can be powered from a standard 120 V AC outlet or a 12 V DC inverter...

The American made SnoBlox Deuce has revolutionized the polycarbonate snow guard industry with its low profile forward mounted 2.5" high face and its sleek 1.5" wide waffled tapered back base that fits most roof panels without rib straddling. This patented product has stood the test of time and is an aesthetically appealing, low cost solution to the problem of sliding snow and ice on metal roofing. It's mounting versatility allows it to be mechanically attached on screw down roofs with a 1.5"...

DeWitt’s 911 Emergency Roof Patch is a contractor-grade powder formulated to provide a temporary, leak-proof seal on flat roofs during emergency conditions. The natural mineral compound expands to a gel on contact with water, helping stop leaks on built-up roofs quickly — even in inclement weather or standing water. This product can be applied directly from the pail over suspected leak areas without special tools, and it continues to seal as long as it remains wet. When conditions allow,...

ChemLink SnowShoe Snow Guards are an adhesive-applied snow retention accessory used to help reduce sudden snow and ice slides off pitched roofs. They’re molded from a durable polycarbonate polymer and are used on a wide range of roof surfaces, including metal, slate, tile, and single-ply membranes. Each carton includes 24 snow guards and the adhesive needed for installation. SnowShoe guards are available in multiple color options for a cleaner finished look on the roof. Key Features...

The Arctic Warmers Junior Caulk Warmer is a compact insulated warming bag designed to hold up to four tubes of caulk or similar materials. It helps maintain internal warmth in cold conditions so temperature-sensitive products remain workable on the jobsite. This unit features insulated construction with a heat-reflective barrier and includes a cord storage pocket for organized setup. Key Features Holds up to 4 tubes of caulk or similar materialsInsulated warming bag with heat-reflective...

The Radians Radwear™ RWG800 Silver Series™ is a hi-visibility thermal lined glove with Reflectivz™ Technology. The wind and water resistant shell provides a comfortable fit in harsh environments, and the Reflectivz™ waterproof plated palm provides a slip free grip in all weather conditions. Uses: Construction Rail Industry Traffic Control Low Visibility Conditions

SureBond SB-190 is the official snow guard adhesive of SnoBlox-Snojax. We pioneered the use of this adhesive with our polycarbonate snow guards over 25 years ago and now it has become the standard in the industry. For a successful installation the adhesive requires 28 days or (672 Hours) at 50 Degrees (F) or above to achieve full cure. Temperatures below 40 Degrees (F) will delay cure time, until temperatures reach 50 Degrees (F) or above to completely cure. Spring, Summer or early Fall is the...

Keep warm with the Nordic Blaze 3-in-1 Balaclava. Made from premium 100% polyester polar fleece, the RWL26 balaclava provides superior warmth and flexibility. Its two-piece design using detachable hook and loop offers added functionality because you can wear it three ways: as a full face mask, neck gaiter, or beanie. The long length covers the nose, mouth, and neck and conveniently tucks into your jacket. Plus, the attachment straps can be secured to hard hat suspensions for enhanced...

The Billy Goat F602 Series Force Blowers are 30% lighter than steel models, with the F602V (89 lbs) and F602X (83 lbs) offering easy maneuverability. Their rounded composite housings and 16-blade fan technology enhance blowing efficiency, reduce noise, and prevent rust or dents. Powered by a 169cc Vanguard engine (F602V) or 208cc Briggs & Stratton engine (F602X), these blowers provide reliable performance and durability. Patented Aim-N-Shoot technology delivers precise airflow control, while...

The Powerblanket Lite PBL20 is designed to maintain consistent propane performance for 20-pound cylinders, even in freezing temperatures. Using an internal preset thermostat at 90°F, it prevents vapor pressure loss, ensuring reliable fuel flow during cold-weather use. The lightweight, portable design makes it ideal for residential grilling, camping, and light commercial applications where dependable propane efficiency is essential. Key Features: Designed for 20-pound propane tanks Internal...

DualGard is a robust two-pipe snow guard system by S-5! designed for use on standing seam and corrugated metal roofs. It uses 1-inch diameter aluminum crossmembers (DualPipe) mounted via DualBrackets and S-5! Mini clamps or CorruBracket attachments. Optional DualClip components may be added under certain conditions to retard snow/ice migration under the bars. The system includes splices, collars, and endcaps for continuous pipe runs. It can be powder-coated or anodized to match roof finishes....

The S-5! DualPipe is the aluminum crosspipe component used in DualGard and VersaGard snow retention systems. It features a 1-inch diameter with a 1/8-inch wall for structural strength, and is engineered to integrate seamlessly with S-5! brackets, clamps, and hardware to create a durable, two-pipe snow guard assembly for metal roofs. Key Features: • 1" diameter aluminum pipe with 1/8" wall thickness • Supplied in 7' 8" (DualGard) or 8' (VersaGard) lengths • Engineered for use with S-5! DualGard...

This Honda-powered blower is a top choice for full-size landscapers, seal coaters, parks departments, cemeteries, resorts, street departments, and golf courses. Its Patented Aim N Shoot™ technology allows you to direct airflow precisely with fingertip control, and it’s lockable for consistent use. The 16-blade closed-face fan delivers twice the airflow of other models, while the F13 smooth housing ensures quiet, powerful performance that won’t rust or dent, backed by a 5-year warranty....

The Powerblanket PBL55F is a full-coverage drum heater that wraps entirely around 55-gallon steel or poly drums to maintain material temperature under cold conditions. With a fixed preset thermostat set for up to 145°F (±5°F / ±3°C), it delivers reliable warmth while protecting sensitive contents from freezing or thickening. Built with durable vinyl and insulated wrap design, it offers consistent performance, simple setup, and year-round utility. Key Features: Full-coverage insulated wrap for...

The Powerblanket BH05 is a 5-gallon drum heater with a fixed internal thermostat set to approximately 100°F. Its full-wrap insulated design distributes heat evenly to eliminate hot and cold spots, keeping contents at the ideal viscosity. Built with a rugged vinyl shell, it is safe for both steel and poly buckets, weather-resistant, and certified to UL and CSA standards.Key Features: Fixed internal thermostat set to 100°F (± 10°F) Full-wrap insulated design for uniform heating Compatible with...

The Powerblanket BH15-RR is a 15-gallon drum heater designed with Rapid Ramp Technology to quickly bring the drum contents up to a safe working temperature of about 100°F. It features a full-wrap insulated design that wraps around the entire drum to eliminate hot or cold spots, working efficiently across steel or poly containers. This preset model comes with a rugged shell built for durability and is certified for safety under UL/CSA standards.Key Features: Rapid Ramp preset internal...

Peladow calcium chloride pellets are a high-purity ice melter formulated to melt snow and ice more rapidly than conventional materials. They are produced to Type S, Grade 2, Class B specifications and contain about 90 % calcium chloride. This pallet includes 55 bags of 50 lb each, ideal for large-scale deicing use. Key features: High purity formulation (Type S, Grade 2, Class B) Approximately 90 % calcium chloride content Rapid melting rate, even in very cold temperatures Round pellet shape to...

The S-5! NEX 2.0 Pipe is the primary horizontal crosspipe for X-Gard snow retention systems. Engineered from aluminum for strength and durability, it integrates with S-5! X-Gard clamps and brackets to provide high-performance snow management for standing seam and other compatible metal roof profiles. Key Features: • Core structural pipe component for X-Gard snow retention systems • Engineered aluminum pipe ensures strength and durability • Works with S-5! X-Gard clamps, brackets, and...

The Powerblanket HB64ROOF Roofer Hot Box is a bulk material warmer specifically designed for roofing applications. With a 64 cu. ft. heating capacity, it protects shingles, adhesives, sealants, and tools from cold-weather damage. Using an internal preset thermostat, the unit maintains an approximate product temperature of 100°F, ensuring materials remain workable even in freezing conditions. Portable and durable, the HB64ROOF is built for job sites where consistent heating and productivity...

Features: Class 32” 3M™ Scotchlite™ Reflective Material100% ANSI Polyester with PU coating - breathable, waterproof with sealed seams100% Black Polyester Fleece linerCan be worn 4 waysRemovable outer jacket sleevesBlack collar, cuffs and waistbandRollup and removable hoodWaterproof constructionPockets: 2 outer, 1 inner, 1 radioZipper and snap closure ...

The S-5! X-Gard 1.0 Bracket is a heavy-duty snow retention system component designed to hold one NEX 2.0 pipe firmly across standing seam metal roofs. Built from high-strength aluminum with stainless steel hardware, the bracket attaches securely to S-5! clamps, ensuring long-term reliability without compromising roof integrity. This bracket is engineered for use in regions with heavy snow loads, helping prevent snow avalanches that could damage property or endanger pedestrians. When combined...

The Powerblanket Lite PBL15 is a lightweight drum heater built for 15-gallon containers. Using the same patented Powerblanket technology as full-size models, it delivers safe, even heat distribution across the drum surface. With a preset thermostat set at 145°F, the PBL15 prevents material damage from cold weather while maintaining consistent performance. Easy to install, energy-efficient, and portable, it is a practical solution for a variety of heating needs.Key Features: Designed for...

Stay warm an in plain site with this high visibility beanie from OccuNomix. This is the new and improved version of the LUX-KCR with 180gm polyester fleece lining for more warmth and comfort. Holds up longer than just acrylic. Can be worn under a hard hat or alone. Features 65gm acrylic knit and reflective stripe. One size fits most adults. Acrylic Watch CapSilver Reflective StripeOne size fits all

The Arctic Warmer is a flexible wrap heater designed to warm 10 oz tubes of adhesives and sealants, enabling smoother application in cold conditions. It is constructed to maintain consistent warmth across the length of the tube. Users can wrap it around the cartridge to improve flow during cold weather. Key Features: Heats 10 oz cartridges evenly Flexible wrap design Enhances dispensing in cold conditions Maintains consistent warmth along tube ...

The RK800 by Occunomix is a classic hard hat tube liner. This design should fit over most regular brim hard hats and will help retain heat from the ears and up. This design will also help maintain and wick moisture from the brow which is a vital amidst cold climates. Fits snugly over most regular brim hard hats100% Polyester knit pulloverKeeps ears warm and head locked inFits snugly over most regular brim hard hatsBlocks wind tunneling inside the crownFolds up on the outside of hard hat, when...

The Powerblanket BH55-RR is a 55-gallon full-wrap drum heater with a fixed internal thermostat preset to approximately 100°F. It uses Rapid Ramp Technology so that it initially draws more power to reach the preset temperature then cycles down to maintain it. Designed for both steel and poly drums, it delivers uniform heat, durability, and safety for demanding industrial conditions. Key Features: Fixed internal thermostat preset to ~100°F (±10°F) Rapid Ramp mode: initially full power, then...

The Billy Goat F902H Force Blower, with a 9HP Honda engine, delivers fast, quiet cleanup. Its F9 Smooth, Rounded Housing enhances airflow and durability. The 16-blade fan and Patented Aim-N-Shoot™ technology provide precise airflow control, while padded handles and a lightweight design improve comfort and speed. The soft rubber Forward Discharge makes cleaning along walls and fences easy.

#14 Wood Purlin Snow Guard Screws These are #14, self-tapping snow guard screw that is 2 inches long with an attached neoprene washer. They are made from case hardened carbon steel construction with an anti-corrosion protective coating. They measure 1/4 - 14 X 2" Teks/3 screws feature a pre-threaded bonded washer and a 3/8” high hex washer head. This screw is design for snow guard attachment into wood purlins or wood substrates at least 2" thick. #14 Metal Purline Snow Guard Screws These are...

Experience unbeatable power and efficiency with our 6” discharge blower, delivering air velocity just under 200 mph to clear debris faster than any other model. Featuring patented Aim N Shoot™ technology, it allows fingertip control to direct airflow precisely where needed, with a lockable position for added convenience. The 16-blade fan design maximizes air movement, while the F18 smooth, rounded housing reduces air voids for a quieter, more powerful performance. The self-propelled option,...

Occunomix LB600 Winter Liner with Heavyweight Fleece Lining is mid length and is flame resistant treated. This liner features warming pack pockets at the ears to hold Hot Rods air activated all day. The DuPont Thermotex micro porous ear barrier material blocks wind, water and cold. This liner has elastic at forehead for snug fit to "Zap the Gap" around face and a reflective silver strip on the back for extra protection in traffic zones. Classic Mid-Length Twill Winter Liner 100% Cotton Twill...

The Powerblanket BH55-PRO is a high capacity, adjustable thermostat drum heater designed to handle 55-gallon steel or poly drums safely and precisely. With a full-wrap insulated blanket and Thermo Probe controller, it allows users to set desired temperature ramps up to around 160°F. Built tough, water-resistant, and certified to UL/CSA standards, this heater ensures steady heating while optimizing energy use. Key Features: Adjustable thermostatic controller for setting temperature from ambient...

The Powerblanket Lite PBLCAUW is designed to keep caulk tubes warm and ready to use in cold environments. This compact pouch holds up to five 10.1 oz caulk tubes, maintaining them at a preset temperature of approximately 70°F. By ensuring proper flow and consistency, it prevents application failures caused by stiff, cold caulk. Lightweight and portable, the unit plugs into any standard outlet and provides reliable freeze protection for job site or shop use. Key Features: Holds up to 5 caulk...

Keep the heat out with a premium hooded sweatshirt that offers both protection and style, this flame resistant pull-over hoodie (#LUX-SWTFR) from OccuNomix is made from a 14.25-Oz. modacrylic and cotton fleece fabric blend for extra breathability and increased moisture wicking to keep your skin and undergarments dry. The sweatshirt also features flame-resistant Nomex® threading, draw cord hood closure, and one lower front pouch pocket for easy access. Flame Resistant Hoodie / Sweatshirt in a...

Enhance your safety gear with the OccuNomix LUX-TJBJ premium 4-in-1 bomber, a versatile addition to your safety wardrobe. Certified as ANSI class 3, this multifunctional jacket is designed with removable sleeves, hood, and a fleece liner for adjustable protection and comfort. Its outer shell is finished with a polyurethane coating, ensuring a waterproof barrier against the elements. Features:  Class 32” Silver reflective tape100% ANSI Polyester with PU coating - water resistant with...

Perfect for contractors and large property owners, the 305cc self-propelled blower helps you clear 30% more property per day. Patented Aim N Shoot™ lets you direct airflow with fingertip control, and it’s lockable for precision. The 16-blade fan and F10 smooth housing deliver powerful, quiet airflow that won’t rust or dent, backed by a 5-year warranty. With thicker padded handles for comfort and a lightweight design, you’ll work faster and more efficiently. Powered by a Vanguard® engine, it...

The S-5! X-Gard 2.0 Bracket is a one-piece, octagonal bracket engineered to secure both pipes of the X-Gard 2.0 dual-pipe snow guard system to standard S-5! clamps. It is part of a non-penetrating, high tensile system designed to support heavy snow loads, fit standing seam profiles, and allow for safe retrofits or new roof installs.Key Features: • Octagonal, one-piece bracket that holds both pipes in dual-pipe X-Gard 2.0 system • Uses two S-5! clamps per bracket for secure, non-penetrating...

The Powerblanket BH15-PRO is part of the Pro Series line, offering precise thermostatic control for 15-gallon drums. Designed with a full-wrap insulated heater blanket, it delivers safe, even heating while preventing material waste and overheating. Its adjustable digital thermostat allows you to set temperatures up to 145°F, ensuring optimal viscosity and flow for a wide range of materials.Key Features: Adjustable thermostat up to 145°F (±5°F) Full-wrap insulated heater for even heat...

The Powerblanket BH05-PRO is a heavy-duty 5-gallon drum heater designed with a thermostatic controller for adjustable heating up to 145°F. Its full-coverage wrap ensures even distribution of heat to eliminate cold spots, helping maintain proper material viscosity in challenging environments. Built with a rugged vinyl shell, this unit is weather-resistant, UL/CSA certified, and compatible with both steel and poly containers. Key Features: Adjustable thermostatic controller up to 145°F Full-wrap...

The Arctic Warmers Tall Warming Cylinder Wrap is a warming solution for larger foam dispensing systems and similar 15–17 gallon tanks. The insulated wrap uses a heat reflecting barrier and flexible insulation to help keep material temperature consistent in cold conditions. This cover includes adjustable closures and a pocket for cord storage, allowing contractors to maintain material consistency without resorting to improvised heating methods. Key Features Wrap for 15–17 gallon tanks and large...

The OccuLux Hi Viz Zip-Up Sweatshirt from Occunomix is made with fabrics made of Whisk-It™ and treated 100% polyester keeping you warm, comfortable, and dry. The Occunomix LUX-SWT3HZ hi vis sweatshirt features a Zip-Up front with two pockets and a hood. The ANSI Class 3 standard sweatshirt keeps wearers warm, comfortable, and conspicuous in high risk traffic environments and a wide range of cool weather conditions. Designed with two bands of 2” wide 3M™ Scotchlite reflective tape on each arm...

The AMES Telescoping Snow Roof Rake (model 193055510) is a durable, lightweight solution for safely removing snow from rooftops without needing to climb. Featuring a push-button telescoping aluminum handle that extends up to 17 feet, this tool offers extended reach with stability. A 24-inch poly blade and non-slip grip ensure efficient snow removal and confident handling. The sleek, collapsible design allows for compact storage during off-season months, making it both effective and convenient. ...

The Occunomix Class 3 Speed Collection Premium Breathable Rain Jacket includes an internal storm flap, a hideaway hood, and a hook and loop sleeve strap. This rain jacket is made of 100% polyester, 300 denier maximum breathable waterproof PU and PTFE bicomponent transfer laminate membrane, with sealed seams poly cotton liner. The two horizontal stripes and four horizontal sleeve stripes on this jacket are made of 2" 3M Scotchlite reflective material. One pocket on this rain jacket is located...