- Features a telescoping adjustment range that fits window and door openings from 21 inches to 51 inches wide for maximum jobsite versatility
- Engineered with a tool-free, clamp-in design for fast, non-penetrating installation in openings before frames are finished
- Constructed from lightweight extruded aluminum for easy transport and reduced user fatigue, paired with durable steel clamping feet
- Equipped with non-marring contact points to prevent surface damage while maintaining a secure grip on structural frames
- Designed specifically for temporary use during early construction phases, providing a dependable tie-off point where permanent anchors are not feasible
- Fully compliant with OSHA 1926.502 requirements, supporting a user capacity of up to 310 lbs with a minimum static strength of 3,600 lbs
Price: $500.00
Item #FALLTECH-7465A
Write a review!
Description
This anchor is designed for temporary fall-protection use in existing window or door openings during construction stages when frames are open. It installs tool-free via a clamp-in, non-penetrating method and adjusts for openings from 21″ to 51″ wide. The body is built from lightweight extruded aluminum and uses durable steel clamping feet to grip structural frames without marring surfaces. It complies with OSHA 1926.502 requirements for temporary anchorage.
Key features:
-
Tool-free clamp-in, non-penetrating non-marring installation for existing openings
-
Telescoping adjustment range from 21″ to 51″ wide to fit various window and door openings
-
Lightweight extruded aluminum construction with durable steel clamping feet
-
Designed for temporary use during construction before doors or windows are installed
Specifications
- SKU: 7465A
-
Frame: extruded aluminum
-
Adjustment range: openings from 21″ to 51″ wide
-
Static strength: minimum 3,600 lb
-
ANSI user capacity: 130 to 310 lb max
-
OSHA user capacity: 130 to 310 lb max
-
Compliance: OSHA 1926.502
FAQs
Q: Can this anchor be used on openings wider than 51″?
A: No — it is designed to fit openings from 21″ to 51″ wide; using it outside this range may compromise clamp effectiveness.
Q: Will it leave marks or damage the window or door frame?
A: It uses non-marring steel clamping feet and is described as non-penetrating and non-marring, which helps protect the frame surface when installed properly.
Q: Is this anchor intended for permanent installation?
A: No — it is described for temporary use in existing openings during construction phases when doors or windows are not yet installed.
Q: What substrate or frame types is this anchor compatible with?
A: It is intended for use in window or door openings where the clamp can engage the structural frame securely; the body is aluminum and clamp feet are steel, so the frame must be able to support the clamp load.
Reviews (0) • Write a review!
This product has no reviews yet. Write a review!
Super Anchor Safety 1012 - Combo Safety Bar for 2x4/2x6...
Super Anchor Safety 1012 Combo Safety Bar for 2×4/2×6 Trusses — reusable steel bar that spans both 2×4 and 2×6 trusses to create a stable, centralized connection point for work positioning and fall-protection setups with compatible components.
Price: $343.00
Availability: In Stock
Usually ships within 1-2 Business Days
The Combo Safety Bar is a temporary, reusable open-framing anchor designed to protect crews during the truss-setting phase—before sheathing is installed. It spans three trusses, auto-gauges spacing at 24 inches on center, and locks on with stainless detent pins. The dual-size saddle design fits both 2x4 and 2x6 top chords, so one bar covers multiple framing packages. Rated for two users when used with appropriate PFAS components, the bar provides a rugged, highly visible tie-off point that...
Super Anchor Safety 1011 - Safety Bar for 2x6 Trusses
Super Anchor Safety 1011 Safety Bar for 2x6 Trusses — reusable steel bar that spans standard 2×6 roof trusses to create a stable, centralized connection point for work positioning and fall-protection setups when used with compatible Super Anchor components.
Price: $328.00
Availability: In Stock
Usually ships within 1-2 Business Days
The Safety Bar 1011 is a temporary, reusable open-framing anchor built specifically for 2x6 top chords. It spans three trusses, locks in place with stainless detent pins, and gives crews a safe, stable tie-off point during the hardest stage to protect—before roof sheathing is installed. Rated for two users and rugged enough for everyday jobsite use, it sets spacing, speeds production, and helps maintain compliant fall protection from the moment trusses go up. Features Purpose-built for 2x6...
Super Anchor Safety 1010 - Safety Bar for 2x4 Trusses
Super Anchor Safety 1010 Safety Bar for 2x4 Trusses — a reusable steel bar that quickly spans standard 2×4 roof trusses to create a stable, centralized connection point for work positioning and fall-protection setups when used with compatible Super Anchor components.
Price: $318.00
Availability: In Stock
Usually ships within 1-2 Business Days
The Safety Bar is a temporary, reusable open-framing anchor that gives crews a safe tie-off point before sheathing or full bracing. It spans three trusses, locks in with stainless detent pins, and automatically gauges trusses at 24" on center. Rated for two users and compatible with shock-absorbing lanyards or SRLs, it’s a fast, rugged solution for truss-stage fall protection. Features Made for 2×4 top chords: Model 1010 sized for 2×4 trusses; bars for other sizes available separately. ...