AES TriRex Mobile Fall Protection System w/20 & 10 cu. ft. Job Box

Fall Arrest rating for three workers and Fall Restraint for two. For Concrete applications, only 3 Workers for Fall Arrest and 2 for Fall Restraint. With the new job box and material rack, you will see safe and productive increases for your leading edge work. Includes Flat-Free Tires, 20 cf. Job Box (w/double door opening from the center) and a Material Rack. Additional 10 cf. job box and Raptor Alert available as an option.

The TriRex was redesigned in 2011 from the ground up, based on customer feedback, features new safety innovations in order to offer the safest, most reliable, and easiest-to-use mobile fall protection unit on the market. Some of the high-lights:

• Streamlined frame, removing any protrusions that might create tripping hazards
• Enlarged front attachment plate to accommodate larger, different sized equipment
• Open lifting hooks have been removed and replaced with closed guide-loops underneath the frame for lifting or securing during transportation
• Fork pockets added so the TriRex can be easily moved and loaded without risking damage

New Design Update:

The new design allows for seven different positions with a spring-loaded lever to move between each position. The handle includes full up storage, the full down towing, and five convenient positions in-between for ease of movement. This also includes a new braking system that allows you to lock the cart in place with a foot brake. – allowing us to do away with the spring-loaded wheel locks.

Features :

• OSHA Compliant
• No Assembly Required
• No Counterweights
• No Loose Parts
• Useful On Every Job Site
• NEW: Positive-locking wheel locks
• NEW: Positive-locking front axle
• NEW: Ratchet engagement arm lock - Automatically secures engagement arm to ensure unit will not disengage during a fall or rescue!
• NEW: Streamlined frame
• NEW: Convenient lifting fork-pockets
• Standard Flat-Free Tires

Length: 74" (without handle attached), 113.5" (with handle attached)
Width: 56.5"
Height: 51"
Weight: 965 Pounds (Base Model)
Tires: Solid Polyurethane 18 x 8.5 x 8 flat free tires, needle bearings with grease zirks
Size of Platform: 23 3/4 x 29 3/4"
Height of Platform from Ground: 21-3/4"
Ground Clearance: 5-1/2"
Warranty: Manufacturers limited warranty covers any defect in workmanship or materials; One year from date of purchase
Standard Job Box Dimensions: 47 1/2" wide x 24" tall x 24" deep
Capacity: 20 cubic feet
Weight: 116 pounds
Description: 16 gauge solid steel construction, powder coated inside and out Weight Carry Capacity of Trailer: 2000 lbs gross weight rating
Fall Protection Standards: 1926.502 (D)
Fall Arrest Anchor Fall Arrest Capacity: Three Workers

Tested and approved for the following Substrates:
Built-Up Roofing (BUR) Membrane
Modified PVC Membranes
Thermoplastic Polyolefin (TPO) Membranes
EPDM Roofing Membranes
Modified Bitumen Membranes
Ballasted EPDM Membrane
Metal Deck (20 ga. And 22 ga. ONLY)
Dens Deck
Hardboard
Plywood
Lightweight Concrete
Gypsum Deck
Polyisocyanurate (ISO)
Expanded Polystyrene (EPS)

Topsoil, grade, compact dirt, at ground level

Flat Surfaces to .5:12 (can be used on slopes .5:12 to 1:12 when using the optional braking system)

DO NOT USE ON THE FOLLOWING SUBSTRATES:
Ice
Snow
Tectum Deck
Metal Deck less than 22ga. or over 20ga.
(Structural Deck)
Loose laid material not part of a complete finished system

** BEFORE HOISTING TO ANY ROOF SURFACE** THE CONTRACTOR MUST VERIFY THAT THE DECK ASSEMBLY CAN ACCOMMODATE THE LIVE LOAD REQUIREMENTS.

Where are the counterweights and/or water tanks?

The Trirex has no counterweights to add or water tanks to fill. the solid steel frame along with the leverage of the safety engagement arm eliminates the need for counterweights and water tanks.

How does it work?

If a fall were to occur, the Trirex has a patented roof safety engagement device that penetrates the roof. this creates a secure anchor point to restrain or arrest the fall.

How many men can attach to the Trirex?

Three men can attach to the Trirex for fall arrest protection.* two additional men can attach to the Trirex for fall restraint for a total of five men attached at any one time.

Is the Trirex OSHA approved?

The Trirex is manufactured in compliance with OSHA regulation 1926.502(d) for fall arrest anchors.

Where do I hook up to on the Trirex?

Three rings are welded to a green plate located in the center on the side of the Trirex. these are the fall arrest tie-off points. two yellow swiveling d-rings are tie-offs for fall restraint. the four yellow fixed lifting hooks located on the corners are for hoisting purposes only. + *for concrete, only two men can attach for fall arrest.

Can the base model be used without the large job box?

No, the large job box is an integral part of the Trirex and is bolted to the frame.

What type of tires are installed on the Trirex?

All Trirex models come standard with solid polyurethane tires.

Are there any parts that need to be replaced or recertified after fall arrest?

Although the Trirex can be used after again after a fall arrest, it’s a good idea to replace the claw components. we’ve got your covered with our pivot point replacement kit. the pivot point replacement kit contains a new pivot pin, brass

How much does the Trirex weigh?

The empty weight of the base model Trirex™ with solid tires weighs 1103lbs.

Can I install my own equipment on the Trirex?

Yes, leading-edge safety offers an optional 10 cubic foot job box but the base model is sold without any additional equipment. the owner has the opportunity to install their own equipment.

Can the engagement system be installed on the roofing carts I already own?

No, the Trirex™ is specifically designed and tested to operate in combination with the roof safety engagement device. a fabricated roofing cart does not comply with OSHA regulations without proper testing and certification.