Floor Joists and Trusses

Want another valuable tool that’s more than just a safety device? The Safety Bar not only provides a sturdy tie-off point, but also accurately spaces your top chords 24” o.c. And we built this bar to last! It spans 3 trusses at the same time and can be rolled down the roof as the trusses are placed. Utilize numerous bars to provide multiple tie-off points. The Safety Bar is made from cold rolled steel and powder coated bright red. The top chord sockets are held in place using the same high...

The Moveable ARS Anchor follows the same design principles as our ARS Permanent Roof Anchors. This is designed for the framing tradesmen that need a quick, easy anchorage connector for their lanyards, lifelines or SRL’s. Made from 11-gauge steel that is powder coated. Comes with a 3/8” stainless steel detent pin with elastic tether. Heavy Duty 11-gauge steel construction2 models cover 2×4 trussesStainless Steel locking detent pinRated for OSHA Fall ArrestPowder Coated for Durability Truss...

Combo Safety Bar for 2×4 and 2×6 trusses The Safety Bar is a unique fall protection anchor for use while working with open truss situations. It spans 3 trusses and locks in securely with detent pins while gauging the trusses 24” on center. 2 users and tie off to the safety bar with the use of a shock absorbing lanyard or SRL’s. Our Safety Bar is the only product on the market for open framing fall protection and is used by framing crews across the country for OSHA compliance during the...

The Guardian Fall Protection Truss Boss Anchor Kit provides everything required for the set-up of a premium roof truss anchor. In addition to a non-corrosive Truss Boss Anchor, this kit also includes waterproof flashing for both composite and tile roofs, and also an anchor cap specially designed to protect the Truss Boss from weather, as well as to not blow off in high winds. The included Truss Boss can be installed on the truss while the truss is still on the ground for additional safety, and...

The Moveable ARS Anchor follows the same design principles as our ARS Permanent Roof Anchors. This is designed for the framing tradesmen that need a quick, easy anchorage connector for their lanyards, lifelines or SRL’s. Made from 11-gauge steel that is powder coated. Comes with a 3/8” stainless steel detent pin with elastic tether. Heavy Duty 11-gauge steel construction2 models cover 2×12 trussesStainless Steel locking detent pinRated for OSHA Fall ArrestPowder Coated for Durability Truss...

The Guardian Fall Protection Concrete Swivel Anchor is specially designed to include a visual indicator that allows the user to clearly see when it is installed correctly (when proper torque is reached, the red cap will break away to display a green cap). This anchorage connector is composed of galvanized steel, making it capable of functioning in a variety of rough environments, and rotates 180° to allow for increased mobility.Features:  Easy to installVisual indicatorPivots and swivels...

Permanent Truss Anchor Installs on roof truss members 2 x 4 or larger Kit includes weather flashing and cap Durable Stainless steel construction for long life May be installed before or after installation of roof sheathing All fasteners included

Safety Bar Temporary/Reusable Anchor The Safety Bar is a unique fall protection anchor for use while working with open truss situations. It spans 3 trusses and locks in securely with detent pins while gauging the trusses 24” on center. 2 users and tie off to the safety bar with the use of a shock absorbing lanyard or SRL’s. Our Safety Bar is the only product on the market for open framing fall protection and is used by framing crews across the country for OSHA compliance during the absolute...

The Guardian Fall Protection CB-1-B is a 6" x 6" bolt-on anchor for wood, steel, and concrete applications, and is permitted for use in combination with horizontal lifelines. This anchor is composed of steel, and is powder-coated for additional durability. It may be used in either vertical or horizontal installation applications. Fasteners not provided.Features: Easy to installCan attach to steel or concrete surfaces.Lightweight and DurableDee ring rotates 180 degrees.Permanent or temporary...

The Guardian Fall Protection Bolt Hole Anchor is a reusable 5,000 pound certified anchorage connector that can be used in either horizontal or vertical applications. Incredibly easy to install, the Bolt Hole Anchor simply needs to be squeezed to release its locking mechanism, inserted into a compatible hole ranging from 3/4" to 1—1/4" in width, and then released to reengage the locking mechanism.Features:  Easy to installCompatible with horizontal lifelinesSqueeze to open, release to lock...

The Guardian Fall Protection CB-1-W Weld-On Anchor is 2.75" in diameter, and may be used in a variety of fall protection applications. It includes a forged steel D-ring and can withstand loads up to 5,000 pounds. This anchor is suitable for installation onto either vertical or horizontal steel structures.Features: Weld on steel applicationTemporary anchor pointPermanent application permissible if user applies appropriate finishForged steel D-ringApplicable Standards: OSHA 1910 & OSHA...

Permanent Truss Anchor Installs on roof truss members 2 x 4 or larger Available as an anchor only or as a kit including weather flashing and cap Durable Stainless steel construction for long life May be installed before or after installation of roof sheathing All fasteners included