Products 1-6 of 6
Show
Ships Free!
Rooftop Equipment - TS-40 - Superwide Tank Spreader (40...
An Applicator For Pourable Roofing Materials (Bonding Adhesive, Cold Process, Coatings)
Price: $835.95
Availability: In Stock
Rooftop Equipment Item #: 131-1005 -

    An Applicator for pourable roofing materials like Bonding Adhesive, Cold Process and Coatings. 40" Width Accurately applies more than 300sq. ft. per minute No waste. Simply drain unused material back into the can Easily holds two buckets of material Different size holes accommodate a variety of liquids Durable polyethylene tanks allows easy clean up

    Ships Free!
    Rooftop Equipment - TS-27 - Doublewide Tank Spreader (27...
    An Applicator For Pourable Roofing Materials (Bonding Adhesive, Cold Process, Coatings)
    Price: $686.95
    Availability: In Stock
    Rooftop Equipment Item #: 131-1004 -

      An Applicator for pourable roofing materials like Bonding Adhesive, Cold Process and Coatings. 27" Width Accurately applies more than 300sq. ft. per minute No waste. Simply drain unused material back into the can Easily holds two buckets of material Different size holes accommodate a variety of liquids Durable polyethylene tanks allows easy clean up

      Ships Free!
      Rooftop Equipment - TS-14 - Singlewide Tank Spreader (14...
      Tank spreaders, efficiently apply any pourable materials, such as low-VOC adhesives and...
      Price: $679.95
      Availability: In Stock
      Rooftop Equipment Item #: 131-1002 -

        Rooftop Equipment - Tank Spreader | Efficiently apply any pourable materials, such as low-VOC adhesives and coatings A gravity-fed, easy to use, low maintenance applicator for any pourable coating or adhesive material 14" Wide5-gallon tankGreat for jobs as small as 20 squares, while still efficient for up to 150 squaresSpreader of choice when productivity is limited to 3,000 square feet per dayAppropriate for both adhesives and coatingsAccommodates both flat Spreader Rollers and Profile...

        Profile Roller Tank (14in. in width)
        Used with 14 in. AG panel, R panel, High R panel, and Single Lock Replacement Rollers
        Price: $169.95
        Availability: In Stock
        Rooftop Equipment Item #: 131-TK-RP-14 -

          This tank is designed to work with some profile rollers as to not cause interference with the standard 14" SingleWide BetterSpreader tank. The tank is correctly sized and necessary to ensure that the roller fits and the holes are drilled to accommodate the profile roller.To be used with:14 in. AG panel14 in. R panel14 in. High R panel14 in. Single Lock Replacement panel rollers

          Ships Free!
          Rooftop Equipment Inc. - 40" SuperBead Foam Adhesive...
          A Gravity Fed, Foam Insulation Adhesive Spreader
          Price: $774.95
          Availability: In Stock
          Rooftop Equipment Item #: 131-1081 -

            A Gravity Fed, Foam Insulation Adhesive Spreader Same Concept as The Better Spreader. Applies 4 Even Beads of Adhesive on Either Steel or Concrete Decking, at Prescribed Coverage Rates. The wheels can be adjusted to straddle a steel roof deck's flutes Low maintenance Unused adhesive can be drained from the tank for later use Smooth polyethylene tank allows easy cleaning Exchangeable 12 Gal. tank Adjustable wheel alignment 39 1/2" wide ...

            Ships Free!
            Rooftop Equipment Inc. - 14" Bead Gravity-Driven Adhesive...
            A Gravity Fed, Foam Insulation Adhesive Spreader
            Price: Choose Size
            Availability: In Stock
            Rooftop Equipment

              Rooftop Equipment - Bead Applicator | Designed By Roofers - For Roofers A Gravity Fed, Foam Insulation Adhesive Spreader Same Concept as The Better Spreader. Applies 4 Even Beads of Adhesive on Either Steel or Concrete Decking, at Prescribed Coverage Rates. The wheels can be adjusted to straddle a steel roof deck's flutes Why choose a Bead Applicator? Increases productivity with somple-to-use, gravity-driven application of adhesives Eliminates clean-up hasssles Reduces waste with factory-set,...

              FAQs

              How do I clean the tank?

              After each use, allow the adhesive to drain out the drain hole. It is best to wipe tank walls and hole edges before the adhesive sets up. Spray all tank surfaces with silicone spray before each use to aid in the removal of hardened material.

              How can I adjust the flow for using materials with different viscosity?

              Distribution ports can be increased with a drill bit. It is best to open the holes in increments of 1/16? at a time and usually only the centermost holes.

              How do I know what size tank spreader to use?

              The 14? Singlewide is best for roofs under 100 squares and in cut-up areas with penetrations.

              The 27? Doublewide is a good balance of maneuverability and productivity. Usually used on projects from 50 squares to 500 squares.

              The 40? Superwide Tank Spreader offers unmatched productivity. As the operator walks along a 40 (1 Meter) a swath of material is applied.

              Why are the wheels covered in tape?

              Teflon tape on the wheels protects them from glue and coatings.

              Why are there two screws at the end of the holes in the tank?

              These two holes are optional. They are to be used when applying Bonding Adhesive where no running puddle is needed.

              When applying coating it is helpful if the end holes are closed to allow the running puddle to diminish toward the ends of the roller.

              Best Sellers

              Ships Free!
              Rooftop Equipment - TS-40 - Superwide Tank Spreader (40...
              An Applicator For Pourable Roofing Materials (Bonding Adhesive, Cold Process, Coatings)
              Price: $835.95

              An Applicator for pourable roofing materials like Bonding Adhesive, Cold Process and Coatings. 40" Width Accurately applies more than 300sq. ft. per minute No waste. Simply drain unused material back into the can Easily holds two buckets of material Different size holes accommodate a variety of liquids Durable polyethylene tanks allows easy clean up

              Ships Free!
              Rooftop Equipment - TS-27 - Doublewide Tank Spreader (27...
              An Applicator For Pourable Roofing Materials (Bonding Adhesive, Cold Process, Coatings)
              Price: $686.95

              An Applicator for pourable roofing materials like Bonding Adhesive, Cold Process and Coatings. 27" Width Accurately applies more than 300sq. ft. per minute No waste. Simply drain unused material back into the can Easily holds two buckets of material Different size holes accommodate a variety of liquids Durable polyethylene tanks allows easy clean up

              Ships Free!
              Rooftop Equipment - TS-14 - Singlewide Tank Spreader (14...
              Tank spreaders, efficiently apply any pourable materials, such as low-VOC adhesives and...
              Price: $679.95

              Rooftop Equipment - Tank Spreader | Efficiently apply any pourable materials, such as low-VOC adhesives and coatings A gravity-fed, easy to use, low maintenance applicator for any pourable coating or adhesive material 14" Wide5-gallon tankGreat for jobs as small as 20 squares, while still efficient for up to 150 squaresSpreader of choice when productivity is limited to 3,000 square feet per dayAppropriate for both adhesives and coatingsAccommodates both flat Spreader Rollers and Profile...

              Profile Roller Tank (14in. in width)
              Used with 14 in. AG panel, R panel, High R panel, and Single Lock Replacement Rollers
              Price: $169.95

              This tank is designed to work with some profile rollers as to not cause interference with the standard 14" SingleWide BetterSpreader tank. The tank is correctly sized and necessary to ensure that the roller fits and the holes are drilled to accommodate the profile roller.To be used with:14 in. AG panel14 in. R panel14 in. High R panel14 in. Single Lock Replacement panel rollers

              Leave a message