Products 1-31 of 31
Show
BlueWater Manufacturing SafetyRail 2000 - Roof Fall...
4ft, 5ft, 6ft, 7.5ft, 8ft, 10ft - Non-Penetrating Guardrail System, Kit includes: 1...
Price: $134.00
Availability: In Stock
BlueWater Manufacturing

 TWO (2) pins are required for every ONE (1) section of rail.  (Please note: Pin style may vary) Yellow Base and Yellow RailsMeet the World's Most Versatile and Non-Penetrating Guardrail System! Companies are using SafetyRail 2000 for: Fall Protection, Temporary Fall Protection, Roof Edge Protection, Roof Hatches, Skylights, Hazard Barriers, Warehouse Dock Doors, Warehouse Traffic Lanes, Cell Workstations, Construction Dig Sites, Dock Platforms, New Building Construction,...

Guardian 15170 Parapet Wall Guardrail System
Parapet Wall Guardrail System
Price: $225.00
Availability: In Stock
Guardian Fall Protection Item #: GUA-15170 -

The Guardian Fall Protection Parapet Clamp Guardrail is an economical and easy to use system. An often overlooked option in the world of fall protection, guardrails and warning lines function to block workers from exposure to fall hazards, often entirely eliminating the need for other types of fall protection equipment. Each clamp is provided with a corresponding guardrail post, which is compatible with 2x4” boards. This system can fit any parapet from 4 to 24 inches in width, and an entire...

ACRO, #12070 Steep Pitch Guardrail System
Adjusts from 4/12 to 16/12. Maximum 8 ft. Spacing
Price: $130.00
Availability: In Stock
Acro Building Systems Item #: 344-12070 -

Works with Open Edge Guardrail System (#12075) to form complete residential protection Comes standard with bracket and post.Roof bracket with guardrail holder.Brackets with interchangeable post.Proves fall protection, slide-guard and toeboard.Installs and removes like roof brackets.Interleaves with shingles.Positions for various roof pitches from 4/12 to 16/12.Tested in a lab to meet OSHA's 2011 regulations.Maximum spacing 8' apart (used with construction grade lumber).Can be used in all...

Guardrail Boot
The Angel Guardrail Boot is easy to install and can be attached to wood or concrete
Price: $40.28
Availability: In Stock
Item #: GUA-15188 -

FEDERAL OSHA 1926.502(B)(3): Guardrail system shall be capable of withstanding, without failure, a force of at least 200 pounds (890N) applied within 2 inches (5.1 cm) of the top edge, in any outward or downward direction, at any point along the top edge. PRODUCT SPECIFICATIONS: Base: Durable high strength plastic Dimensions: 8½ (L) x 5¾ (W) x 5¼ (H) FEATURES: Durable high strength plastic Pliable, yet flexible to withstand harsh job-site environments and abuse Reusable Safety orange for high...

ACRO, #12090 Parapet Wall Guardrail System
Parapet Wall Guardrail System
Price: $196.00
Availability: In Stock
Acro Building Systems Item #: 344-12090 -

Assembles Quickly from inside of parapet Parapet bracket weighs 19 lbs. Capacity: 8' on center Guardrail post is always on inner side of parapet wall to meet OSHA height regulations throughout its use Individual units can be moved without complete disassembly of units and guardrail posts Adjusts to wall width 4" to 24" with a 3" adjustment screw Powder Coated Safety Yellow Complies with OSHA Standards The Acro parapet system model #12090 is one example which offers contractors the ability to...

ACRO, #12075 Open Edge Guardrail System
Provides fall protection and toeboard on rake-edge of roof
Price: $99.95
Availability: In Stock
Acro Building Systems Item #: 344-12075 -

Works with Steep Pitch Guardrail System (#12070) to Form Complete Residential Protection Roof bracket with guardrail holder.Brackets with interchangeable post.Provides fall protection, slide-guard and toeboard.Installs and removes like roof brackets.Inerleaves with shingles.Works on any pitch up to 16/12.Tested in a lab to meet OSHA's 2011 regulations.Maximum spacing 8' apart (used with construction grade lumber).Can be used in all phases of construction. ...

Guardian 15173 Residential Guardrail System
Adjusts from 6/12 to 16/12. Maximum 8 ft. Spacing
Price: $165.73
Availability: In Stock
Guardian Fall Protection Item #: GUA-15173 -

The Guardian Fall Protection Residential Guardrail System is a specialized bracket and guardrail assembly intended for steep roofs of pitches from 6/12 to 16/12. This versatile and lightweight system is easy to install and remove, and is compact for convenient storage. Composed of powder-coated steel, it is designed for superior durability and weather resistance. 2x6” toeboards are required for use with the Residential Guardrail System, and must be installed according to equipment instruction...

Sale!
Guardian 15500 C-Slab Grabber Guardrail System
Ideal solution for installing guardrails during concrete decking operations
Price: $95.55
Availability: In Stock
RACE Item #: GUA-15500 -

The Guardian Fall Protection 15500“C-Slab Grabber” is an ideal solution for installing guardrails during concrete decking operations. With the C-Slab Grabber’s new backup safety cable (that keeps the systems from separating), quick adjust handle, and anti-slip tape, this product easily meets or exceeds OSHA’s safety standards. This product is fast and easy to set up and adjusts up to a 36-inch slab. The rails that can be used with this product include: 2 X 4’s, 2 X 6’s, or cable. With its...

Ships Free!
AES Raptor All-In-One Guardrail 400 ft. System
Works on flat/low edges, over gravel stops, on parapet walls, and even on concrete slab...
Price: $21,100.00
Availability: In Stock
Leading Edge Safety

The All-In-One railing base is the last base you will ever need to buy. You can install it on flat/low edges, over gravel stops, on parapet walls, and even on concrete slab overhangs. The standard version includes posts that accept RaptorRail metal rails. A wood option is available that comes fitted with brackets that can accept lumber rails or RaptorRail metal rails (metals rails still included with wood option)(Lumber is not included with wood option)(Standard version does NOT accept lumber...

Tie Down 65014 Steep Slope Guardrail
Adjustable pitch positions from 6/12 to 16/12
Price: $120.95
Availability: In Stock
Tie Down Engineering Item #: TDE-65014 -

Make your next residential roofing job safer. Unique design features convenient handle for transporting to the job site. Adjustable rail brackets for easy and fast attachment of 2 x 4’s (not included). Guardrail works on both gutter and rake edge of roof. Lightweight and easy to install. Steep Slope Guardrail bracket has 5 adjustable pitch positions from 6/12 to 16/12, simply remove and tighten wing nut into the corresponding angle and you’re done! Extra wing nut and bolt attached. Maximum...

Guardian 15159 Gusset For Guardrail, 5-3/4 in.
Allows Guardrail system to be installed in flush wiht outside walls
Price: $5.50
Availability: In Stock
Guardian Fall Protection Item #: GUA-15159 -

The Guardian 15159 Standard Gusset mount allows for guardrail systems to be installed flush with outside walls. Guardrail posts used in combination with this gusset are compatible with bot 2 x 4 in. boards and Snap-on metal railings. The standard Gusset mount may be used in multiple installation locations if undamaged, although new fasteners must always be used with each new installation application Features: Easy to installInstalls with Screws or NailsReusableGalvanized Steel Applicable...

Guardian 61133 52 in. Universal Guardrail Post
Installs easily into mounts
Price: $62.97
Availability: In Stock
Guardian Fall Protection Item #: GUA-61133 -

The Guardian Fall Protection “Universal Guardrail Posts” are designed to work along with Guardian’s other guardrail mounting options. These product are composed of lightweight welded steel and install easily. The maximum spacing between each post is 8' apart.

Bluewater Manufacturing, #500718 VersaClamp Parapet Safety...
Adapts to Parapet Walls, Concrete Decks, Balconies and I-Beams
Price: $211.15
Availability: In Stock
BlueWater Manufacturing Item #: BWM-500718 -

The VersaClamp Safety Guardrail is the most versatile guardrail C-Clamp in the marketplace for fall protection, and can be used on parapets and concrete slabs. Featuring a unique design, the compression plates are off-set so not to damage copings or flashings on parapets. With fast and easy installation, simply place the clamp over a parapet and slide the compression plate against the surface. Turn the compression rod against the plate and you are finished. Features:  8 ft. SpacingExpands...

BlueWater Manufacturer - GuardDog Self-Closing Industrial...
The GuardDog Self-Closing Gate is tough, durable and easy to install.
Price: $346.05-$469.05
Availability: In Stock
BlueWater Manufacturing

The GuardDog Self-Closing Gate is tough, durable and easy to install. Featuring a unique self-closing design with two stainless steel torsion springs, the GuardDog industrial safety gate can open in any direction. To meet diverse application requirements, the safety gate is available in 5 nominal sizes and is adjustable laterally to 6” (-3 to +3 of the nominal size). The GuardDog Self-Closing Gate arm is dimensioned to match top- and mid-rail heights of an OSHA-compliant guardrail. When the...

New!
RACE Rail 2-In-1 Parapet and Flat Leading Edge Kit
Price: $135.00
review-star review-star review-star review-star review-star
(1)
Availability: In Stock
RACE Item #: RACE-RAIL -

RACE Rail 2-In-1 Parapet and Flat Leading Edge Kit OSHA compliant leading edge fall protection system that can be used on both leading edge and a parapet wall. The RACE Rail Parapet/Leading Edge System can be easily installed by one person. The system can accommodate any parapet from 4” to 36” wide. The perimeter clamp can be installed on both flat edge and parapet wall construction. The perimeter clamp is clamped onto the vertical edge of a parapet wall. The RACE Rail System features a...

Guardian 15175 Guardrail Post - 42 in.
Installs easily
Price: $54.08
Availability: In Stock
Guardian Fall Protection Item #: GUA-15175 -

The Guardian Fall Protection Guardrail Post is designed to be compatible with all Guardian guardrail mounting equipment. It is compatible with 2x4” boards and snap-on metal rails, is incredibly lightweight (only 4 pounds), and is 42 inches tall, keeping it exactly in line with current OSHA regulations. Guardrail Posts must be spaced at a maximum of 8 feet apart.Features: Designed to work with Residential Guardrail SystemEasy to installDesigned to work with Parapet Clamp Guardrail...

Guardian 61140 Stair Mount Guardrail System - For...
Stair Mount for use with Guardrail Posts
Price: $32.03
Availability: In Stock
Guardian Fall Protection Item #: GUA-61140 -

The Guardian Fall Protection Stair Mount is an ideal solution for the installation of guardrails on unfinished stair cases, which can be some of the most dangerous locations on a construction site. Composed of powder-coated steel for superior durability and weather resistance, the Stair Mount is suitable for installation onto both wood and concrete substrates with just 4 fasteners.Key Features: Mounts with 4 screws or nailsEngineered to be used on concrete 2,000 psi or strongerDimensions...

AES Raptor All-In-One Guardrail Base Assembly
Works on flat/low edges, over gravel stops, on parapet walls, and even on concrete slab...
Price: $374.15
Availability: In Stock
Leading Edge Safety Item #: AES-RB-03-010-11 -

The All-In-One railing base is the last base you will ever need to buy. You can install it on flat/low edges, over gravel stops, on parapet walls, and even on concrete slab overhangs. The post can accept RaptorRail metal rails. The railing brackets can be adjusted vertically and rotated around the post, so setting up corners and strange geometries is simple. When you’re all done, the base and parapet clamp store in one convenient piece. Features: Flat/Low edges Gravel stops Parapet walls...

Guardian 61141 Stair Mount Guardrail System - For 2x4...
Stair Mount for use with 2 x 4 Boards
Price: $27.11
Availability: In Stock
Guardian Fall Protection Item #: GUA-61141 -

The Guardian Fall Protection Stair Mount is an ideal solution for the installation of guardrails on unfinished stair cases, which can be some of the most dangerous locations on a construction site. Composed of powder-coated steel for superior durability and weather resistance, the Stair Mount is suitable for installation onto both wood and concrete substrates with just 4 fasteners. Key Features:  Easy to install Lightweight and durable Install onto wood or concrete Mounts...

New!
Tie Down - Zip Rail Compression Bracket System, 355 ft...
Each Zip Rail System comes with everything needed for 355 feet of guardrail protection,...
Price: $16,659.95
Availability: In Stock
Tie Down Engineering Item #: TDE-70736 -

After proper set up, the Zip Rail Fall Protection System allows workers full mobility and access to the roof’s edge without the need of either a lanyard and harness or a warning line system. Utilizing the Zip Rail System, workers have a secure job site with improved roof accessibility, saving both time and money. The Zip Rail compression bracket installs on parapet walls or the gravel stop bracket may be fastened on a flat roof edge. Stanchions feature quick connecting pop pins for faster rail...

Ships Free!
AES Raptor All-In-One Guardrail 200 ft. System
Works on flat/low edges, over gravel stops, on parapet walls, and even on concrete slab...
Price: $14,250.00
Availability: In Stock
Leading Edge Safety

The All-In-One railing base is the last base you will ever need to buy. You can install it on flat/low edges, over gravel stops, on parapet walls, and even on concrete slab overhangs. The standard version includes posts that accept RaptorRail metal rails. A wood option is available that comes fitted with brackets that can accept lumber rails or RaptorRail metal rails (metal rails still included with wood option) (Lumber is not included with wood option)(Standard version does NOT...

BlueWater LP Outrigger Kit
Used to continue a run of SafetyRail 2000 when ducting or conduit does not allow for a...
Price: $408.45
Availability: In Stock
BlueWater Manufacturing Item #: BWM-500122 -

The LP Outrigger is used to continue a run of SafetyRail 2000 when ducting or conduit does not allow for a rail section to be used. The outrigger is placed under the object to continue the run, thus eliminating the needed outriggers when discontinuing the run. It also can be used as an outrigger when there is not enough available space for a standard rail outrigger. We do not recommend using the LP Outrigger as a standard outrigger. It creates a trip hazard and should only be used when all...

Guardian 61027 Gusset For Guardrail, 9-1/4 in.
Allows Guardrail system to be installed in flush wiht outside walls
Price: $7.22
Availability: In Stock
Guardian Fall Protection Item #: GUA-61027 -

The Guardian 61027 Standard Gusset mount allows for guardrail systems to be installed flush with outside walls. Guardrail posts used in combination with this gusset are compatible with bot 2 x 4 in. boards and Snap-on metal railings. The standard Gusset mount may be used in multiple installation locations if undamaged, although new fasteners must always be used with each new installation application Features: Easy to installInstalls with Screws or NailsReusableGalvanized Steel Applicable...

AES Raptor RaptorRail 36 Parapet Clamp Kit #RCCS-36
Give the RaptorRail system a parapet roof attachment option
Price: $5,555.55
Availability: In Stock
Leading Edge Safety Item #: AES-RCCS-36 -

The RaptorRail™ Parapet Clamp Kit is designed and built to assist in keeping your workers safe while enhancing productivity. It’s easy to setup, and works with most existing rail systems, giving them a new flexibility and usefulness. The RaptorRail™ Parapet Clamp Kit can be installed vertically or horizontally, allowing it to work on roofs, soffits, and intermediate levels. The RaptorRail™ Parapet Clamp Kit crate includes 36 parapet clamps to give the RaptorRail™ system a parapet roof...

New!
Tie Down 70762 Universal Guardrail Kit
Universal Guardrail Kit, Fall Protection Rail Kit, 10 ft Railings.
Price: $4,794.95
Availability: In Stock
Tie Down Engineering Item #: TDE-70762 -

The universal guardrails are manufactured out of high strength low alloy steel (HSLA). Guardrails exceed all OSHA load requirements. All guardrails and bases are manufactured 100% in the USA.The Zip Base is a 3-hole base with galvanized or yellow TS22 coating and rubber feet (58 lbs). They nest and stack easily for storage before and after use. Zip Base offers superior resistance to impact loads and its unique design is 40% lighter than competitor bases. Comes with toe board slots on each side...

AES Raptor RaptorRail Perimeter Guardrail - 350 ft....
Raptor Rail can be installed quickly and easily, yet is adaptable to virtually any...
Price: $15,166.75
Availability: In Stock
Leading Edge Safety Item #: AES-RR-CS-350 -

The LES RaptorRail™ 350′ Roofing Base Kit has the proper parts to cover an 80’x80′ building or 320-350 lineal feet of coverage in each kit. Complete rail system includes 36 posts, 36 railing feet and bases, 56 ten foot rails, 8 universal corner adapters, 4 small (29-43″) adjustable rails, 4 large (70″-120″) adjustable rails, and 4 extra large (120″-218″) adjustable rails. Also includes a RaptorRail™ crate specifically designed to provide organization for all parts of the system. With the...

Tie Down Universal Guardrails
Price: $149.95
Availability: In Stock
Tie Down Engineering

The Universal Guardrails are manufactured out of high-strength, low-alloy steel. Guardrails exceed all OSHA load requirements. All Guardrails and bases are manufactured 100% in the U.S.A. Guardrails are designed to fit competitors' bases. Easy and quick attachement 2-Step assembly process Collapsible brackets with safety pins (included) Non-Penetrative design Easy to collapse reset Sturdy design for permanent raised fit (If Required) TS22 safety yellow coating Meets compliance: OSHA...

AES Raptor Wood Railing Slider Bracket
Slider Bracket
Price: $46.05
Availability: In Stock
Leading Edge Safety Item #: AES-RB-03-310-11 -

Slider Bracket for the AES Raptor All-In-One Guardrail Base Assembly. 

New!
Tie Down-71094 Zip Base 3 Hole - Yellow Paint - w/ Rubber...
Tie Down Zip Base 3 Hole w/ Rubber Feet for Tie Down Universal Guardrail System
Price: $259.90
Availability: In Stock
Tie Down Engineering Item #: TDE-71094 -

Universal Guardrail Zip Base, 3 Hole with Rubber Feet. Nests and stacks easily for storage before and after use. Zip Base offers superior resistance to impact loads and its unique design is 40% lighter than competitor bases. Comes with toe board slots on each side and handle holes for lifting. Yellow powder coat. 

AES Raptor- RaptorRail Perimeter Guardrail - Base Assembly...
Complete Perimeter Fall Protection System
Price: $57.65
Availability: In Stock
Leading Edge Safety Item #: AES-RB-P-000 -

The RaptorRail™ is designed and built to keep your workers safe while enhancing their productivity. It can be installed quickly and easily, yet is adaptable to virtually any situation. The RaptorRail™ crate and cart systems allow the components to be hoisted to the desired location in a single lift and be accessible at any location. The swiveling base allows finish work to the edge without removing the safety of the system. The base post and the parapet clamps have rubber pads to protect the...

BlueWater Manufacturing SafetyRail 2000 - Roof Fall...
5ft, 7.5ft, 8ft, 10ft - Non-Penetrating Guardrail System, Kit includes: 1 Base, 1 Rail...
Price: $164.00
Availability: In Stock
BlueWater Manufacturing

TWO (2) pins are required for every ONE (1) section of rail.  (Please note: Pin style may vary) Galvanized Base and Galvanized RailsMeet the World's Most Versatile and Non-Penetrating Guardrail System! Companies are using SafetyRail 2000 for: Fall Protection, Temporary Fall Protection, Roof Edge Protection, Roof Hatches, Skylights, Hazard Barriers, Warehouse Dock Doors, Warehouse Traffic Lanes, Cell Workstations, Construction Dig Sites, Dock Platforms, New Building Construction,...

Is a guardrail considered fall protection?

Well built guardrails are a reliable and convenient means of fall protection because they act as a visible and physical barrier to help prevent falls from heights or between levels including falls from roofs, balconies, stairwells or falls into open holes.

What is the minimum thickness of the top rail of a guardrail?

Top rails and midrails shall be at least one-quarter inch (0.6 cm) nominal diameter or thickness to prevent cuts and lacerations.

What are the three main parts of a guardrail?

Guardrails have three main parts: a top rail, a mid rail, and a toe board.

How strong are guardrails?

OSHA's standard for the engineering of standard guardrails is that the guardrail must withstand a 200-pound force applied to the top of the rail in any direction.

Do I need a guardrail?

Generally, guardrails are required when the building has steps, landings, platforms or accessible roof spaces. According to the code, guardrails are required when there is a difference of 30 in. or greater between two upper and lower surfaces. OSHA requirements for guardrails are quite stringent.

Best Sellers

Guardrail Boot
The Angel Guardrail Boot is easy to install and can be attached to wood or concrete
Price: $40.28

FEDERAL OSHA 1926.502(B)(3): Guardrail system shall be capable of withstanding, without failure, a force of at least 200 pounds (890N) applied within 2 inches (5.1 cm) of the top edge, in any outward or downward direction, at any point along the top edge. PRODUCT SPECIFICATIONS: Base: Durable high strength plastic Dimensions: 8½ (L) x 5¾ (W) x 5¼ (H) FEATURES: Durable high strength plastic Pliable, yet flexible to withstand harsh job-site environments and abuse Reusable Safety orange for high...

Guardian 15170 Parapet Wall Guardrail System
Parapet Wall Guardrail System
Price: $225.00

The Guardian Fall Protection Parapet Clamp Guardrail is an economical and easy to use system. An often overlooked option in the world of fall protection, guardrails and warning lines function to block workers from exposure to fall hazards, often entirely eliminating the need for other types of fall protection equipment. Each clamp is provided with a corresponding guardrail post, which is compatible with 2x4” boards. This system can fit any parapet from 4 to 24 inches in width, and an entire...

ACRO, #12070 Steep Pitch Guardrail System
Adjusts from 4/12 to 16/12. Maximum 8 ft. Spacing
Price: $130.00

Works with Open Edge Guardrail System (#12075) to form complete residential protection Comes standard with bracket and post.Roof bracket with guardrail holder.Brackets with interchangeable post.Proves fall protection, slide-guard and toeboard.Installs and removes like roof brackets.Interleaves with shingles.Positions for various roof pitches from 4/12 to 16/12.Tested in a lab to meet OSHA's 2011 regulations.Maximum spacing 8' apart (used with construction grade lumber).Can be used in all...

ACRO, #12090 Parapet Wall Guardrail System
Parapet Wall Guardrail System
Price: $196.00

Assembles Quickly from inside of parapet Parapet bracket weighs 19 lbs. Capacity: 8' on center Guardrail post is always on inner side of parapet wall to meet OSHA height regulations throughout its use Individual units can be moved without complete disassembly of units and guardrail posts Adjusts to wall width 4" to 24" with a 3" adjustment screw Powder Coated Safety Yellow Complies with OSHA Standards The Acro parapet system model #12090 is one example which offers contractors the ability to...

Leave a message