Roof Weatherproofing Safety

For use on roofs from flat to 12/12 pitch, wood or metal. 5000 lb. anchor point. Fasteners included. Tested and approved for metal roofing applications, minimum 20 gauge metal or thicker, attached directly onto the surface. For metal installation: use (16) screws (8 per side), 6 in center column of fastener installation holes, in 1 hole left of center and 1 hole right of center. Guardian recommends HILTI Kwik-Pro self-drilling screws. Features: Designed for temporary use on wood rooftopsFits...

The Guardian Fall Protection Two-Way Universal Standing Seam Clamp is lightweight, reusable, and easy-to-use. This product possesses an all steel construction with zinc electroplate finish making it very durable. The clamp also features a unique, reversible design that allows for seams up to 1-inch wide. The MR-24, VSR or similar profiles can be covered with one clamp. Features: Fits most brands and styles of standing seam roofs and is completely reusableUnique reversible design allows for...

The Guardian Fall Protection Bull Ring Anchors are suitable for personal fall arrest, restraint, or work positioning applications. For all applications, the worker weight capacity range (including all clothing, tools, and equipment) is 130 to 310 pounds. The anchor itself is constructed of 100% zinc-plated steel. Substrate must be roof truss or support beam that is minimum of 3" thick CDX or better. All fasteners (use either six 16d, 3" long 8 gauge nails or three 1/4" x 3" zinc-plated steel...

Most roof anchor installations require the removal of shingles to install. This can pose a problem, especially on older roofs with brittle shingles. No need to remove the ridge cap to install fall arrest anchors because this flashing allows you to install anchors directly over your existing roofing material. The D- Minus anchor can be mounted directly over existing asphalt shingle roofs without removing any shingles. To cover the anchor and fasteners and protect it from the elements we...

Works with Open Edge Guardrail System (#12075) to form complete residential protection Comes standard with bracket and post.Roof bracket with guardrail holder.Brackets with interchangeable post.Proves fall protection, slide-guard and toeboard.Installs and removes like roof brackets.Interleaves with shingles.Positions for various roof pitches from 4/12 to 16/12.Tested in a lab to meet OSHA's 2011 regulations.Maximum spacing 8' apart (used with construction grade lumber).Can be used in all...

Fall arrest or work positioning for one person with a maximum body weight of 310 lbs (140 kg) including tools and equipment. An energy absorber is required. Not rated for use with SRL's, Horizontal Lifelines, multiple users, Window Washing, Fall Arrest Side-Loading or Reverse-Loading. Can be used on roofs up to 12:12 pitch. 1076 includes stainless steel spiral shank nails & butyl flashing Instruction Manual ...

The Guardian Fall Protection Snappy Anchor is a disposable anchorage connector designed to fit a wide variety of wood roof pitches. The Snappy is convenient, easy to install and remove, and meets all applicable OSHA regulations. To use, simply adjust the Snappy to fit over selected roof ridge, then nail into roof truss using all fastener installation holes. Supplied with all necessary fasteners. Features:  Single UseCan be bent to fit any roof pitch Convenient and disposable Easy to...

Single D-ring, Permanent Roof Anchor with Stainless Steel Body; Fastens Under Shingles, Leaving D-ring Exposed for Attachment; 19" Including D-ring with 17" Nailing Surface. Features:  Designed for under-tile roof ridge or field installationFeatures 17" stainless steel nailing plate with 2" connecting D-ring.Includes 16D stainless steel nails for installation to wood roof structuresMeets OSHA 1926.502 regulationsNailing Plates: Stainless steelD-ring: Plated alloy steel; 5,000 lb...

FallTech 7410 Reusable Roof Anchor is constructed using rugged alloy steel with a yellow chromate finish. It is easily installed and removed from trusses or sheathing and uses either 12 #14 x 3½" screws of 20 16d nails. Fits any roof peak up to 12/12 and can also be mounted perfectly flat. Rated at over 5,000 lbs. Economical because it can be used again and again Holes are clearly marked for use with either nails or screws Screw holes are counter-sunk so screws are flush with the anchor Meets...

The RS20 anchor is a permanent roof anchor designed specifically for tile, slate, wood and synthetic roofing materials. It can also be used as a temporary fall protection anchor using factory supplied screws. It can be installed on the roof, floor or wall. The dual-hole RS-20 accepts our WS Series and hex head screws. Temporary Use on Roofs, Walls and FloorsNumerous Fastening Options to Choose FromRated for 5,000 OSHA Fall ArrestTile UsePlease read manufacturer instructions before using this...

The Super Anchor Hinged Roof Anchor is a reusable roof anchor that is designed to install quickly to almost any pitched roof and can even be installed flatFeatures:  5000 lb. anchor point Variable pitch roofs Fasteners included for Fall Arrest rating Use fasteners only onceHeavy-duty 11 ga. Steel Complies with all applicable OSHA & ANSI Standards Please read and understand the manufacturer instructions before using this product.Instructions ...

The Guardian Fall Protection Halo Anchor is a temporary and reusable roof anchorage connector. It is composed of 1/4 inch thick steel, a zinc-plated forged alloy steel O-ring, and can support loads up to 5,000 pounds. It may be used in both Fall Arrest and Restraint applications, and is supplied with all necessary fasteners. FEATURES: Removable/Reusable 1/4" thick steel roof anchorComplete with zinc plated forged alloy steel O-ringNail or bolt into the roof member)Designed to be removable, it...

Double D-ring; Permanent Roof Anchor with Stainless Steel Body; Fastens Under Shingles, Leaving D-rings Exposed for Attachment; 17" Including D-rings with 12" Nailing Surface.Features: Designed for installation under roof ridge capFeatures 12" stainless steel nailing plate with 2-1/4" connecting D-rings.Includes 16D stainless steel nails for installation to wood roof structuresMeets OSHA 1926.502 regulationsNailing Plates: Stainless steelD-rings: Plated alloy steel; 5,000 lb min....

For Asphalt Shingle, Wood, Copper, Slate, Metal and "Simulated Tile" Metal Roofs Strap Length 13" / Total Length 18" Includes 8 stainless steel spiral nails for permanent installation Many older and recently constructed homes do not have roof anchors – so the Retro-Fit Anchor is the perfect solution. The anchor is designed to be installed by removing only a portion of the ridge and does not require a conventional flashing system. Use over asphalt shingle, wood shake or metal roofing, the butyl...

Works with Steep Pitch Guardrail System (#12070) to Form Complete Residential Protection Roof bracket with guardrail holder.Brackets with interchangeable post.Provides fall protection, slide-guard and toeboard.Installs and removes like roof brackets.Inerleaves with shingles.Works on any pitch up to 16/12.Tested in a lab to meet OSHA's 2011 regulations.Maximum spacing 8' apart (used with construction grade lumber).Can be used in all phases of construction. ...

The Guardian Fall Protection Residential Guardrail System is a specialized bracket and guardrail assembly intended for steep roofs of pitches from 6/12 to 16/12. This versatile and lightweight system is easy to install and remove, and is compact for convenient storage. Composed of powder-coated steel, it is designed for superior durability and weather resistance. 2x6” toeboards are required for use with the Residential Guardrail System, and must be installed according to equipment instruction...

Bolt-on D-Ring Anchor with Installation Plate  Features: Forged D-ring and Bolt-on PlateProvides Simple Overhead Anchorage SolutionFor use on steel I-beams, columns and other steel structuresHeavy-duty steel construction2" x 4-1/2 plate with 1/2" holesComplies With ANSI Z359.18-2017  Installation Plate: Plated alloy steelD-ring: Plated alloy; 5,000 lb min. static strengthStatic Strength: 5,000 lb min ANSI User Capacity: 130 to 310 lb maxOSHA User...

This is a single sided D-ring anchorage device that are installed at the ridge, hip-ridge or in the field for permanent or temporary use. Permanent use anchors are supplied with stainless steel nail fasteners and a butyl strip flashing. The 8-1/2” length is idea for shingle type roofs allowing the anchor to be attached over the roofing material. The RS-10 is exactly ½ of our RetroFit anchor, making it an ideal complimentary anchor for hip ridges and shed roofs. Available with a “Dual Hole”...

The Guardian Fall Protection Ridge-It Anchor line is designed for use on wood rooftops. This Ridge-It model RIDG-1 is manufactured with a D-ring on one end and is 9—3/4" long, while the RIDG-2 is manufactured with 2 D-ring ends, and is 18" long. Ridge-It Anchors are composed highly durable stainless steel and zinc-plated steel, and are compliant with all applicable OSHA regulations. Ridge-It Anchors are easy to install, and are ideal for both residential construction and maintenance...

Wood or Metal Deck Applications 5,000 lb. anchorage point Forged alloy D-ring Painted steel construction Includes 20 16D nails for single use 3 lbs. total weight Instructions * This anchor may be installed on steel decking with a minimum material thickness of 22 gauge (.030 inch) over Z-purlins with a minimum material thickness of 16 gauge (.064 inch). The maximum span between purlins is 6 feet. Twelve 1/4"-14 screws are required to fasten the anchor. The screws should be of sufficient length...

3' Tie-Off / Cut Off Straps Feeds through or in-between sheeting All trades post sheeting have a tie-off point

Provides mud sill in loose soil conditions (grass, dirt, clay, and sand) Provides additional margin of safety and security when used in accordance with instructions Fits double 2 x 4 wood poles

Weld-on D-Ring Anchor with Unplated Installation Plate Features: Forged D-ringPlain/Uncoated Steel Plate for Weld-on or Bolt-on ApplicationsCan be installed wherever weld-on applications are preferredProvides Simple Overhead Anchorage SolutionFor use on steel I-beams, columns and other steel structuresHeavy-duty steel construction2" x 4-1/2 plate with 1/2" holesInstallation Plate: Unplated alloy steelD-ring: Plated alloy; 5,000 lb min. static strengthStatic Strength: 5,000 lb...

The easy-to-use 12048 scaffold brackets offer convenience for residential or commercial roofing projects. They are installed over wall sheathing just below the eave height on one or all four sides of a structure to create a safe, convenient walkway for erection of roof trusses, plywood, shingle, fascia, gutters, and under-eave covering. They include a 3/16" sway brace for right or left hand use and a 5/8" safety bolt and clip. The #12020 Plate Hanger may be used to hook the scaffold bracket...

For Tile Strap Length 353" / Total Length 4018" Includes 8 stainless steel spiral nails for permanent installation Many older and recently constructed homes do not have roof anchors – so the Retro-Fit Anchor is the perfect solution. The anchor is designed to be installed by removing only a portion of the ridge and does not require a conventional flashing system. Use over asphalt shingle, wood shake or metal roofing, the butyl flashing strip attached to the underside of the anchor will provide...

The Guardian Fall Protection “Universal Guardrail Posts” are designed to work along with Guardian’s other guardrail mounting options. These product are composed of lightweight welded steel and install easily. The maximum spacing between each post is 8' apart.

The Guardian Fall Protection Guardrail Post is designed to be compatible with all Guardian guardrail mounting equipment. It is compatible with 2x4” boards and snap-on metal rails, is incredibly lightweight (only 4 pounds), and is 42 inches tall, keeping it exactly in line with current OSHA regulations. Guardrail Posts must be spaced at a maximum of 8 feet apart.Features: Designed to work with Residential Guardrail SystemEasy to installDesigned to work with Parapet Clamp Guardrail...

The Guardian Fall Protection Beamer 2000 is a versatile Fall Arrest anchor designed for use both overhead and at foot level. Attachable to both steel I and H beams, the Beamer 2000 offers Nylon bushings to provide smooth movement along the beam, that also function as impact indicators in the event of a fall. This extremely durable anchor also includes a precision machined aluminum bar and ratcheting end pieces, which allow for quick and easy adjustment with just one hand. When used at foot...

Metal Roof Anchor The stem height of the anchor is compatible with high rib roofing panels and blanket type insulation. Waterproofing is achieved using a high quality E.P.D.M. gray colored flashing boot and matching stem cover that has an aluminum flange allowing it to be configured easily to any shape panel. The anchor stem features a collapsible design that will arrest a fall and also reduce the shock load to the Z-Purlin by several hundred pounds. The Super Z-Purlin anchor can be installed...

Leading edge retractables (models with an attached shock absorber pack) are designed for use in applications to provide added protection against lifeline wear and/or cutting, when working near leading edges, where a fall may occur. This could include, but is not limited to, roofing or eaves, sheared, cold rolled, or cut steel, and edge work on concrete and various decking operations. USE CAUTION…..and provide additional protection against cutting (i.e. a heavy pad) over the exposed sharp edge....

Designed specifically for the Metal Building industry, our Super Z-Purlin provides an easy to install anchorage device that includes attachment bolts. The stem height of the anchor is compatible with high rib roofing panels and blanket type insulation. Waterproofing is achieved using a high quality E.P.D.M. gray colored flashing boot and matching stem cover that has an aluminum flange allowing it to be configured easily to any shape panel. The anchor stem features a collapsible design that...

The Guardian Fall Protection “Universal Guardrail Posts” are designed to work along with Guardian’s other guardrail mounting options. The product is composed of lightweight welded steel and installs easily into Guardian Fall Protection guardrail gusset mounts (15159 and 61027). The maximum spacing between each post is 8' apart.  Features: Installs easily into mountsAlso available in 52" & 74" size options (please call) Applicable Standards: OSHA 1910 & OSHA 1926 Subpart...

Attaches to bottom of pump jack pole to secure pump jack. One is required for each pump jack.

FallTech 7410M Reusable, Hinged Roof Anchor with heavy duty D-ring is constructed using alloy steel with a yellow chromate finish. Manufactured for attachment to metal decking, its hinged design conforms to most roof peaks and can be mounted perfectly flat Rated at over 5,000 lbs.Economical because it can be used again and againHoles are clearly marked for use with screwsScrews IncludedScrew holes are counter-sunk so screws are flush with the anchorMeets the requirements of OSHA 1926 and ANSI...

The Guardian Fall Protection Beamer 3000, the newest in our line of beam anchors, combines the many versatile features of the Beamer 2000 with some new innovations. The Beamer 3000 weighs 25% less than its predecessor, making it one of the lightest beam anchors available on the market. It also includes a dual adjustment feature that makes it even easier to adjust to its ideal position. No more unsnagging a connector or a lifeline when working at heights, the new and improved Beamer 3000...

Meets or Exceeds OSHA standards Adjustable from flat roof to 16:12 pitch Includes: 1 roof bracket, 1 toeboard bracket, 1 leg insert, 1 upright Can be used to catch debris for removal System can be used during shingle installation

Allows you to attach two 2 x 4's for a strong, safe guardrail. Provides 20" of work space (works with or without the work bench).

This Toeboard attachment is a component of the Guardian Fall Protection Stacker Bracket System. Toeboards are required on all guardrail systems if there is any risk for equipment or materials to fall to a lower surface, and are always recommended. The Toeboard attachment fits to the Stacker Bracket Frame to allow for the safe and easy installation of toeboards. Features:  Attachment for hanging scaffolding Durable  Applicable Standards: OSHA 1910 & OSHA 1926 Subpart...

12080 and 12082 is a perimeter guardrail system that is great for flat roofs and has adjustable angles to fit most roof pitches. The system is easy to install and remove, with no special tools needed, just nails and "J"bolts. Complies with the OSHA safety standards for fall protection. Perimeter guardrail Great for flat roofs Adjustable angles to fit most pitches Complies with the new OSHA Safety Standards Easy installation & removal No special tools required Compact for storage Use nails,...

Meets or Exceeds OSHA standards Adjustable from flat roof to 16:12 pitch Includes: 1 roof bracket, 1 toeboard bracket, 1 leg insert, 1 upright Can be used to catch debris for removal System can be used during shingle installation

Cut work time with a work bench right on the scaffold. Can be attached to a guardrail or pump jack.

The Guardian Fall Protection Beamer 2000 is a versatile Fall Arrest anchor designed for use both overhead and at foot level. Attachable to both steel I and H beams, the Beamer 2000 offers Nylon bushings to provide smooth movement along the beam, that also function as impact indicators in the event of a fall. This extremely durable anchor also includes a precision machined aluminum bar and ratcheting end pieces, which allow for quick and easy adjustment with just one hand. When used at foot...