Anchors By Roof Type

The 30° angle fixed length, factory engineered Horizontal Lifeline System is for use by 3 workers in fall restraint or 2 in fall arrest. This system is available in a 20’ kit with or without a carry bag. This 3rd party engineered horizontal line kit is a cost-effective way to have multiple workers on the roof with room to move freely. Engineering standards specify that a horizontal lifeline without an energy absorbing device subjected to fall hazards must have a 30° anchors between anchorage...

The Parapet Roof Anchor by Tie Down Engineering provides a parapet wall fall protection anchor for work on lower-level surfaces. This parapet clamp works with retractable lanyards, vertical lifelines, and shock absorbing lanyards. Designed the Parapet Roof Anchor as the “go to” solution when roof penetration is not an option, these parapet wall roof anchors for fall protection feature a large easy-to-grip adjustment handle for quick set-up and proper securement. Tie Down Engineering maintains...

The Guardian Fall Protection Truss Boss Anchor Kit provides everything required for the set-up of a premium roof truss anchor. In addition to a non-corrosive Truss Boss Anchor, this kit also includes waterproof flashing for both composite and tile roofs, and also an anchor cap specially designed to protect the Truss Boss from weather, as well as to not blow off in high winds. The included Truss Boss can be installed on the truss while the truss is still on the ground for additional safety, and...

The new Falltech Chain Roof Anchor, is a highly portable and reusable anchor to be used on residential and commercial wood structures.  The Anchors O-Ring serves as the attachment point for either a PFAS or on HLL system. With it's heavy steel anchoring plates and flexible belted rubber center, the Chain Roof Anchor can be installed either on the ridge or on the field of a roof and may be used on flat or pitched surfaces. The Anchor is Easily installed with nails as a Single-Point anchor...

The anchor can be installed as a retro/reroof application or in new construction on low- and high-profile tile and slate roofing material. This is a double D-ring anchor that measures 40” in between the D-rings which allows them be exposed just under the last course of tile. The unique design does not require a conventional flashing system because the anchor does not penetrate the sheeting. It installs with 8 spiral shank stainless steel nails and includes a butyl flashing strip to provide a...

Introducing the newly redesigned PR 600 mobile anchoring system, now available at a lower price. This complete system, which includes a cart, ballast weights, and pivot plates, provides fall protection for up to three people, with two for fall arrest and one for fall restraint. The system is now lighter and easier to assemble and disassemble, making it easier to lift over ducts and piping that may lay over the roof's work surface. The component parts can even be taken up to the roof in an...

The Malta Dynamics Reusable Roof Anchor is a reusable anchorage connector designed for temporary use on wood rooftops. Our roof anchors fit all roof pitches from flat to 12/12 and their thick-plated steel construction means longer lasting product life. Supplied with all necessary fasteners.Key Features:● Meets OSHA 1910, OSHA 1926 Subpart M, and ANSI A10.32-12● Can be installed with screws or nails● Fits up to 12/12 roof pitch● Fasteners provided● For temporary use on wood rooftops● Worker...

The PitchPro is a premier fall protection anchor designed for sloped-roof asphalt shingle construction. The PitchPro is the perfect solution for both new and existing construction, and its low-profile installation makes it an excellent choice for permanent applications. Its oversized connection point makes attaching and detaching easy and bind-free. Made from robust powder-coated steel, the PitchPro resists damage from repeated installations, and ensures the longest possible lifespan....

The Parapet Wall Anchor installs easily onto existing parapet walls with no need for any additional tools or penetration of the wall surface. Suitable anchor point connection for work positioning or descent off a building roof or as the anchor point in your personal fall arrest system. Features:  Accommodates concrete parapets 2.36″ (6cm) to 14.17″ (36cm)Easy installation method for high productivityHigh strength steel constructionPortable and reusableBuilt-in tie-off D-ringNon-penetrating...

The Guardian Screw-Down Metal Roof Anchor is a temporary and reusable anchor point, designed to be used with SRL's up to 50ft. in length. This anchor easily installs on Flat wood or Metal substrates, and allows for the attached SRL to rotate a full 360 degrees. Made from power-coated steel for increased durability.  Features: Can be used with most retractable lifelines up to 50ft. (or up to 65ft. in length if used in a combination with the retractable swivel adapter) Allows the...

The Moveable ARS Anchor follows the same design principles as our ARS Permanent Roof Anchors. This is designed for the framing tradesmen that need a quick, easy anchorage connector for their lanyards, lifelines or SRL’s. Made from 11-gauge steel that is powder coated. Comes with a 3/8” stainless steel detent pin with elastic tether. Heavy Duty 11-gauge steel construction2 models cover 2×12 trussesStainless Steel locking detent pinRated for OSHA Fall ArrestPowder Coated for Durability Please...

The D-ShakL anchor can be mounted onto various surfaces and used in numerous ways – it is truly a universal anchor point. It is a 360-degree use anchor. Unlike other anchors, our forged D-ring is captured on the shackle with a spot-welded plate. This keeps the D-ring united with the anchor at all times, especially during installation in tough situations. The anchor is only 4.5” x 2.0” and can be mounted on the exterior or interior of structures. It can be installed onto wood framing, concrete...

Designed specifically for the Metal Building industry, our Super Z-Purlin provides an easy to install anchorage device that includes attachment bolts. The stem height of the anchor is compatible with high rib roofing panels and blanket type insulation. Waterproofing is achieved using a high quality E.P.D.M. gray colored flashing boot and matching stem cover that has an aluminum flange allowing it to be configured easily to any shape panel. The anchor stem features a collapsible design that...

The SafeWaze 360° Roof Anchor is a temporary and reusable fall protection-anchor point, offering a full 360° working radius. Built for use on wood roofs and installs in seconds with the provided fasteners. • 360° Working radius• Zinc Plated Steel (Base), Painted Steel (Connection Point)• (6) 1/4” x 3” in Stainless lag screws for wood installation• Weight capacity: Single person - 310 lbs.(Including person, tools, and materials)• Minimum strength 5,000 lbs.• Meets:OSHA...

Safety Bar Temporary/Reusable Anchor The Safety Bar is a unique fall protection anchor for use while working with open truss situations. It spans 3 trusses and locks in securely with detent pins while gauging the trusses 24” on center. 2 users and tie off to the safety bar with the use of a shock absorbing lanyard or SRL’s. Our Safety Bar is the only product on the market for open framing fall protection and is used by framing crews across the country for OSHA compliance during the absolute...

The Malta Dynamics Single Use Roof Anchor is a handy addition to the roofer’s toolbox. It can be easily bent over the peak of the roof or manipulated to match the pitch of your roof. Because of its versatility and durability, this adjustable pitch anchor creates a reliable tie-off point for your lifeline without causing lasting damage to the rooftop. When installing on the roof, make sure to locate the roof’s crossbeam so that you are anchoring into a strong and solid surface that can support...

The SSRA3 Universal Mounting Plate was engineered as a secure non-penetrating mounting solution for various equipment on standing seam roof systems. Constructed of 6061-T6 Aluminum and professionally tested to over 10,000 lbs., far beyond the strength of any roofing system. The SSRA3 is pre-drilled to accept the FallTech 7395A / 7395D Rotating SRD anchor and self retracting devices up to 65 ft. However, up to 12 additional mounting holes may be drilled to accept a wide range of equipment....

Does your jobsite feature a flat roof surrounded by a parapet wall? If it does, then you need a way to anchor your self-retracting lifelines (SRLs). Malta Dynamic's parapet clamp system allows you to put your SRL in place with a sturdy connection that helps support weight and keep your workers safe. The reusable device is easy to install and won’t cause damage to the wall. Your workers can use our parapet anchor on walls varying in thickness from 2.36″ to 14.1″. On a jobsite, time is critical,...

Designed specifically for the Metal Building industry, our Super Z-Purlin provides an easy to install anchorage device that includes attachment bolts. The stem height of the anchor is compatible with high rib roofing panels and blanket type insulation. Waterproofing is achieved using a high quality E.P.D.M. gray colored flashing boot and matching stem cover that has an aluminum flange allowing it to be configured easily to any shape panel. The anchor stem features a collapsible design that...

The Guardian Fall Protection CB Anchor Series are perhaps the most proven fall protection anchors on the market. CB Anchors are compatible for installation onto wood and steel (fasteners are included). The anchor post functions to extend though roofing so that it is accessible both during and after roof construction, and is compatible for use with SRLs, vertical lifelines, horizontal lifelines, and shock absorbing lanyards. CB Anchors are composed of durable, galvanized steel, and are an...

Having an anchorage point on wheels has been a revolution in fall protection. We know that the industry has long sought a more compact fall protection solution, and thus we are extremely proud to introduce the Safety Bull. Smaller than the original TriRex and lighter than the Stinger the Safety Bull is our most versatile mobile fall protection unit. When the Safety Bull is on the roof, two workers can attach to the anchorage point, put tools on the...

The Swivel-D anchor is a fully articulating anchor that rotates 360-degrees and swivels 180-degrees. It can attach to virtually any structure including steel, wood, and concrete. It is manufactured with a heavy-duty stainless-steel shackle and a zinc-plated 2.0” inside diameter forged steel D-ring. It is a highly durable anchor that can be used for either temporary or permanent installation on the interior or exterior of your building or structure. This anchor is very universal in its...

We have recently upgraded our horizontal lifeline systems to include a 4-person 100' rope, which can be shortened to any length. 2-person capacity on standing seam roofs and 4-person capacity when anchored with cross arm straps. Temporary Horizontal Lifeline Kit Includes 100' Kernmantle Rope, won't scratch metal roof panels. Everything you need to provide a temporary Horizontal Lifeline on a 22 ga. or 24 ga. steel standing seam roof.Kit Includes: Four Standing Seam Roof Anchors (SSRA1)Two...

This removable concrete anchor has an exclusive “Easy Button” feature that is sure to boost productivity by providing immediate anchor removal and instant user mobility. The anchor can be set as hard as desired without fear of it getting stuck.FEATURES 5K rated removable concrete wedge anchor designed for 3/4″ by 3″ holeIncorporates easy trigger for repeated use5,000 lbs max capacity10.75″ overall length / Requires 3/4″ hole drilled for placement Materials: Steel body; Stainless steel cable...

The FrogLink Temporary Roof Anchor is a temporary anchor point with built-in energy absorber and 360° working radius. Ideal for wood roofs. Can be used as a single point anchor or as part of a horizontal lifeline system.FEATURES: Stainless steel construction360° working radiusBuilt-in energy absorber reduces stress & damage to the mounting structureEasily attaches with 7, 14 gauge 75 mm long roofing screws (not included)Single User ...

Part of our CB Anchor Series, the S-Anchor is perhaps one of the most proven fall protection anchors on the market. The S-Anchor is designed for either fall protection or suspension/tie-back work. The S-Anchor functions to extend though roofing so that it is accessible both during and after roof construction, and is composed of durable, galvanized steel. It is an excellent choice for fall protection or window washing applications! Features: Easy to installCompatible with horizontal...

The newest addition to Tie Down's mobile fall protection line, Big Foot offers even easier portability while allowing work on concrete, TPO, and EPDM. This lightweight series provides fall arrest for one person and an additional two in restraint. With a gross weight of 750 lbs., nearly half the weight of the Squatch, Bigfoot includes a jacking feature for easy mobility and handling, printed instructions, and hoist rings for lifting. Available in both a USA model and a Canadian model, this...

Non-penetrating, adjustable anchor for standing seam roofs The Adjustable Standing Seam Roof Anchor is designed for fall protection systems on new or existing standing seam roofs. It features twin mounting bars using a total of eight (8) industry-standard S-5 clamps for incredibly secure attachment to standing seams (see instructions for complete list). The clamps will not penetrate the panels or seams, ensuring the roof integrity is not compromised. SKU: 53221 Features Adjustable from 12” to...

Features: Rotating anchor maintains proper SRL orientation angle to connected userFeatures adjustable cradle for DuraTech SRLs and other SRL brands up to 60'.SRL cradle includes D-ring for secondary restraint attachmentIncludes 16D nails and 2-1/2" lag screws for over-ridge installationFor temporary reusable applications on pitched wood roof trusses with sheathingMeets OSHA 1926.502 regulations ...

The Vertical Wall anchors are designed for exterior wall applications as an overhead anchorage device that is nearly invisible from the ground. Fabricated from 11-gauge 430 stainless steel in two models to adapt to varying slope roofs. The install at the wall plate and top chord junction with a single bolt and 4 16d vinyl sinkers that are supplied with each anchor. Perfect for siders, window installers and painters. Can be painted for minimum visual effect. Designed to accommodate the bird...

Post Adapter Sleeve for Parapet AnchorProvides secure fit to join Parapet Anchor #7460A and Guardrail Post #6401422.Allows parapet Anchor to also function as a guardrail clamp

FallTech Rotating Deck Anchor is designed for maximum versatility and safety with a 360° self-orienting D-ring for use in temporary Fall Arrest or Restraint applications. The reusable Rotating Deck Anchor is designed for installation onto exposed #10 rebar and threaded rod and is secured with user-supplied rebar wing nut or hex nut. Designed for installation onto 1" diameter exposed threaded rod or exposed #10 rebar. Precision-cut bushing provides 360° D-ring rotation.For temporary use on...

The Vertical Wall anchors are designed for exterior wall applications as an overhead anchorage device that is nearly invisible from the ground. Fabricated from 11-gauge 430 stainless steel in two models to adapt to varying slope roofs. The install at the wall plate and top chord junction with a single bolt and 4 16d vinyl sinkers that are supplied with each anchor. Perfect for siders, window installers and painters. Can be painted for minimum visual effect. Designed to accommodate the bird...