Flat Roofing

The Guardian Fall Protection Temper Reusable Roof Peak Anchor (00455) is a heavy-duty, cost-effective fall protection anchorage connector designed for temporary installation on residential and commercial roofing projects. Made from zinc-plated steel, this anchor installs over the roof peak and provides a secure tie-off point for a single worker. Its reusable design makes it ideal for contractors who work across multiple jobsites, while the included fasteners simplify installation. Compact...

3 Person Fall Arrest +2 Person Fall Restraint The Trirex is a mobile fall protection system that provides safe and efficient access to elevated work areas. It is designed to be used by up to five workers at a time, and it meets and exceeds all OSHA and ANSI standards for mobile fall protection. The Trirex features a patented engagement system that locks your anchor point into its deepest point of penetration during a fall, providing superior safety. It also has a streamlined design with a...

The Guardian Fall Protection CB-12 Roof Anchor (00645) is a versatile, permanent anchorage connector designed for use on wood, steel, or concrete substrates. Built with high-strength welded steel and a durable powder-coated finish, the CB-12 provides a secure tie-off point for fall arrest and restraint systems. Its compact 12-inch design allows easy installation and compatibility with a wide variety of roof structures. Once installed, it delivers a reliable, OSHA- and ANSI-compliant anchor...

This anchor is designed for secure attachment to parapet walls without penetrating the structure. It clamps onto parapets from ½″ to 15″ thick and requires a minimum height of 9″. Protective rubber pads prevent damage to surface material. The anchor includes a primary D-ring for fall arrest, restraint and suspension applications and an additional D-ring for optional tie-back use. Key features: Tool-free clamp-on installation with no fasteners required Adjustable to fit parapet wall thicknesses...

The Guardian Fall Protection CB-18 Roof Anchor (00657) is a permanent roof anchor designed for installation in wood or steel decks. Featuring an 18-inch anchor post, it provides an elevated tie-off point to reduce lifeline interference and improve worker mobility. Made from welded steel and finished with a durable powder coating, the CB-18 is built for long-term use in construction and industrial environments. Rated for single-user applications in fall arrest or restraint systems, the Guardian...

This roof anchor is designed for permanent installation under wood roof ridge caps to provide a secure tie-off point for fall-protection systems. It features a 12″ stainless-steel nailing plate and two 2-¼″ plated alloy-steel D-rings. The unit includes 16D stainless-steel nails for installation on wood roof structures and is engineered to meet the requirements for overhead anchorage in wood-roof applications. Key features: Stainless-steel 12″ nailing plate designed for wood roof ridge...

The Guardian Fall Protection Parapet Wall Anchor (15171) is a portable, non-penetrating anchorage connector designed to clamp securely to parapet walls. With an adjustable width range, it installs quickly without damaging the structure, creating a safe tie-off point for personal fall arrest systems. Constructed from high-strength, powder-coated steel, this reusable anchor provides durability and reliability for construction, roofing, and industrial applications. The Guardian 15171 is...

The Guardian Fall Protection CB-18 Roof Anchor (00656) is a permanent, welded steel anchorage connector designed for installation in concrete decks. With its 18-inch height, the CB-18 provides extended clearance for roofing applications and ensures optimal tie-off points above the working surface. Powder-coated for durability, the CB-18 is engineered for single-user fall protection in both fall arrest and restraint applications. Designed for long-term installation, the CB-18 Roof Anchor meets...

Built for permanent or semi-permanent tie-off points, the FS888 creates a dependable anchorage on compatible structural members. The low-profile plate bolts directly to approved steel or concrete (per the installation instructions/engineer guidance) and presents a smooth D-ring connection for fast, clean clip-ins. Tough construction and clear labeling make inspections straightforward so crews can get to work—with confidence—at height. Features Bolt-on anchor plate that creates a fixed D-ring...

2 Person Fall Arrest +2 Person Fall Restraint The R2000™ maintains the same safety features of the popular TriRex™ with a lighter weight for when the situation warrants. The R2000™ mobile anchor cart allows for mobile and versatile fall protection for 2 person fall arrest and 2 person fall restraint. The R2000™ meets and exceeds OSHA 1926.502(D). The R-2000-01-20 R2000 Mobile Fall Protection Cart by Leading Edge Safety combines OSHA-compliant anchorage with integrated storage in a rugged,...

The Guardian Fall Protection 4-Way Plate Anchor (00691) is a reusable, heavy-duty anchorage connector designed to provide maximum versatility on the jobsite. With four connection points arranged in different directions, this anchor offers flexibility for lifeline and lanyard tie-off, reducing line tangling and improving worker mobility. Made from high-strength steel with a corrosion-resistant finish, the 00691 is built for demanding environments. Its simple bolt-on design allows installation...

The Tie Down 65077Z Parapet Roof Anchor provides a non-penetrating clamp solution for parapet walls where roof penetration isn’t viable. It supports a single tie-off point and is rated at 5,000 lb for fall arrest. The anchor adjusts to fit parapet widths from 4 to 16 inches and is compatible with horizontal lifeline spans up to 20 ft. Key Features Non-penetrating parapet wall clamp anchor Single tie-off point rated for 5,000 lb Adjustable to fit parapet widths from 4″ to 16″ Compatible with...

TriRex™Mobile Fall Cart 3 Person Fall Arrest +2 Person Fall Restraint The Trirex is a mobile fall protection system that provides safe and efficient access to elevated work areas. It is designed to be used by up to five workers at a time, and it meets and exceeds all OSHA and ANSI standards for mobile fall protection. The Trirex features a patented engagement system that locks your anchor point into its deepest point of penetration during a fall, providing superior safety. It also has a...

The SafeWaze SW900 Parapet Wall Anchor is designed to restrain tools up to 10 lb and reduce dropped object hazards. It features a dual‑end connector system—one end includes a durable choker loop with release tab, and the other a steel swivel carabiner. The elasticized webbing extends for added reach and retracts to minimize slack, making it ideal for mobile-duty tasks in construction, roofing, or maintenance environments.

A rugged, versatile anchor for single-user fall protection that you can mount in a variety of ways depending on the structure. The D-ShakL2 uses a heavy-duty shackle with a captured, free-rotating D-ring to simplify clipping in and reduce twist at the connection point. Install temporarily to wood framing with WS screws, or make it permanent by bolting or welding to steel or by using engineered concrete anchors. Rated to 5,000 lb and built with a hot-dip galvanized finish for long service life,...

Introducing the newly redesigned PR 600 mobile anchoring system, now available at a lower price. This complete system, which includes a cart, ballast weights, and pivot plates, provides fall protection for up to three people, with two for fall arrest and one for fall restraint. The system is now lighter and easier to assemble and disassemble, making it easier to lift over ducts and piping that may lay over the roof's work surface. The component parts can even be taken up to the roof in an...

The Malta Dynamics A6316 Parapet Anchor is a temporary, non-penetrating anchorage connector designed for flat roofs with parapet walls. It provides an overhead tie-off point for personal fall arrest and fall restraint systems without requiring drilling or permanent wall modifications. The anchor features an adjustable clamp design that fits a range of parapet wall thicknesses and installs without tools using dual tightening handles. Protective rubber pads help reduce contact damage to the wall...

Meet the Safety Bull - Smaller than the original TriRex and lighter than the Stinger the Safety Bull is Leading Edge Safety's most versatile mobile fall protection unit. Having an anchorage point on wheels has been a revolution in fall protection. We know that the industry has long sought a more compact fall protection solution, and thus Leading Edge is extremely proud to introduce the Safety Bull. Smaller than the original TriRex and lighter than the Stinger the...

The Swivel-D anchor is a fully articulating anchor that rotates 360-degrees and swivels 180-degrees. It can attach to virtually any structure including steel, wood, and concrete. It is manufactured with a heavy-duty stainless-steel shackle and a zinc-plated 2.0” inside diameter forged steel D-ring. It is a highly durable anchor that can be used for either temporary or permanent installation on the interior or exterior of your building or structure. This anchor is very universal in its...

The Tie Down BigFoot 60060US is a non-penetrating mobile fall protection system designed to support one user under fall arrest and two under restraint simultaneously. It weighs 750 lb (U.S. model) and is engineered for use on concrete, TPO, and EPDM roof substrates without membrane penetration. It features hoist rings, a jacking mechanism, wheels, and printed operating instructions. Key Features Non-penetrating mobile fall protection system Supports 3 users: 1 in fall arrest + 2 in fall...

The Guardian Fall Protection CB-18 Roof Anchor with Premium Swivel Top (00654) is a permanent anchorage connector designed to provide maximum flexibility and safety. With its 18-inch steel post, this roof anchor elevates the tie-off point above the working surface, reducing trip hazards and lifeline interference. Its premium 360° swivel top allows lifelines and SRLs to rotate freely, preventing twisting and increasing worker mobility. Constructed of heavy-duty welded steel and powder-coated...

The CRA-4 4-Way anchor line allows multiple horizontal lifeline segments to intersect on a single anchor point. Models 1032-4G, 1033-4G, 1042-4G offer riser heights of 12", 18", and 24" respectively, with foam-filled risers and a cast loop top. Each unit is rated for a 5,000 lb minimum base tensile strength and is engineered to support intersection of up to four HLL directions. Key Features Multi-direction horizontal lifeline intersection anchor (4-Way) Foam-filled riser for durability and...