Materials on Clearance

Lucas #9600 Joint & Termination Sealant is a 100% solids non-shrinking moisture cure urethane sealant intended for sealing large joints and roof termination bars. Minimal odor, contains no solvents and less than 10 grams per liter VOC. Excellent adhesion to concrete, masonry, EPDM, PVC, wood, vinyl and most other common building materials. APPLICATION To use this product cut the tip to the desired size and puncture the foil seal. Small orifice size and/or an incompletely punctured seal may...

#14 Wood Purlin Snow Guard Screws These are #14, self-tapping snow guard screw that is 2 inches long with an attached neoprene washer. They are made from case hardened carbon steel construction with an anti-corrosion protective coating. They measure 1/4 - 14 X 2" Teks/3 screws feature a pre-threaded bonded washer and a 3/8” high hex washer head. This screw is design for snow guard attachment into wood purlins or wood substrates at least 2" thick. #14 Metal Purline Snow Guard Screws These are...

The Marathon PVC Roof Drain Kit, also known as the Enpoco Pak, is designed for reroof and retrofit applications requiring fast and reliable drainage. Made from durable PVC, these drains come in multiple outlet sizes (2″, 3″, 4″, and 6″) and feature a complete kit including a strainer and clamp ring. Easy to install and lightweight, the Enpoco Pak provides a cost-effective solution for contractors needing dependable roof drainage. Key Features: Available in 2″, 3″, 4″, and 6″ outlet sizes...

The S-5! S-5-PV-41 Kit is a zero-penetration attachment solution engineered to secure framed photovoltaic modules to standing seam metal roofs. It accommodates module frame thickness of approximately 1.6 in (41 mm) to 2.4 in (60 mm). The kit includes a mounting disk (aluminum or stainless depending on clamp material), Universal PV Stud, PV Grab for module clamping, and a flange nut. Clamps or brackets are sold separately. The system ensures module-to-module electrical bonding and protects roof...

Designed for critical waterproofing repairs, 160.1 Amphibicaulk is a resilient caulking‑grade roof cement that adheres reliably to both damp and dry surfaces—even under adverse conditions. Its water‑displacing formulation ensures a secure, durable seal around areas prone to leaks, such as joints, skylights, chimneys, and roof penetrations. Key Features Bonds to damp or dry surfaces with water-displacing properties Ready-to-use caulk-tube format for precise application in tight or vertical...

The Marathon BS-104 Adjustable Drain Guard is a 10-inch dome-style guard engineered to keep debris from clogging roof drains. Constructed of corrosion-resistant aluminum, it provides both durability and lightweight performance. With a 10″ (254 mm) outside diameter and 13″ (330 mm) overall length, this adjustable guard offers a secure fit and long-lasting protection for commercial and industrial roof drainage systems. Key Features: 10″ adjustable aluminum drain guard Dimensions: 10″ OD × 13″...

The Marathon Cast Iron Roof Drain Kit, also known as the Cast Pak, is built from heavy-duty cast iron to provide long-lasting durability and watertight performance. Each kit includes a cast iron drain body, clamp ring, and strainer. Available in 3″, 4″, 6″, and 8″ outlet sizes, the Cast Pak is designed for reroof and retrofit applications where strength and reliability are essential. Key Features: Available in 3″, 4″, 6″, and 8″ outlet sizes Rugged cast iron construction for maximum durability...

The Portals Plus Premolded Corners (items 52020, 51030 & 52030) provide pre-fabricated inside and outside corner flashings designed for parapet walls, mechanical openings, skylights, roof-top furnaces and other roof interface points. Each unit is injection-molded of 0.060″ thick EPDM (for single-ply membranes) or Neoprene (for built-up roofs) and features 8″ height with 6″ legs, radius corners, and feathered edges to optimize adhesion. The corners are ozone and ultraviolet light resistant, and...

S-5! R Clamp is a structural, non-penetrating clamp engineered for attachment to ribbed standing seam metal roof profiles (e.g. Rib Roof® and similar). It securely holds roof-mounted accessories like snow guards, signage, lighting, or solar without piercing the panel. Made of structural aluminum, it comes with stainless steel hardware and includes an M8 bolt for accessory mounting. The clamp can be installed optionally with a supplemental sheet-metal screw for added holding strength....

The S-5! K Grip Clamp is engineered for concealed-fastened, bulb snap-together roof profiles such as KlipLok®, Clip-Loc, KlipRib®, Speed Deck, Loc-Rib®, Mirage®, and similar panels. It uses side-bolts rather than setscrews, and the top mounting bolt is positioned over the center of the seam to reduce the moment arm, improving strength and minimizing seam distortion. Interchangeable inserts (sold separately) match various seam geometries. There is also a “Mini” version which is shorter and uses...

PGHA85-BK is a height adjustable version of OMG’s PipeGuard designed to support rooftop pipe, conduit, or tubing with diameters from ½-inch to 4-inches. It lifts pipes to heights adjustable between 5-inches and 8½-inches above the roof surface using an adjustable stainless steel support, combined with an EPDM rubber base to protect roofing membranes. Its triangular design sheds water and the integral clamp allows quick tool securing. Key Features fits pipe sizes from ½-inch to 4-inches...

The Marathon BCTS49CR is a 4-inch Copper-Tite retrofit roof drain with a copper body, factory-applied tape seal, and clamping ring for watertight performance. It is designed for reroof and retrofit applications and includes a 10-inch ABS clamping ring and 10-inch polyethylene strainer. Available with a 14-inch small flange or an 18-inch large flange, the BCTS49CR features a 9-inch outlet length to fit securely into existing piping. Key Features: 4-inch retrofit drain with anti-backup tape seal...

Lucas #777 Rubberized Flashing Cement is a premium grade trowel applied flashing cement used to Install, Repair, or Rebuild Roof Flashing at parapet walls, gravel stops, stacks, vents, monitors, and similar applications. #777 may be used with Polyester fabric reinforcement for permanent repairs to asphalt and modified bitumen roof. This product may be applied to wet and underwater surfaces APPLICATION The surface must be clean and debris free to be repaired. Apply rubberized flashing cement...

Level up your layout lines with contractor-grade, bright white marking chalk from Keson. The 1060W delivers crisp, easy-to-see lines for framing, layout, roofing, masonry, and general construction. Finely milled for smooth flow and even coating, it loads fast, sticks well to common jobsite surfaces in dry conditions, and cleans up easily when you’re done. Key Features Contractor-grade performance: Consistent, reliable line quality for daily pro use. Bright white, non-permanent color:...

The WP3000-DD-FRG is a replacement dome and flashing assembly designed for Wade 3000 Series roof drains. This component provides debris protection at the drain inlet while the flashing ring helps create a proper seal between the drain body and the roofing surface. It is built for commercial and industrial flat roof systems and serves as a direct-fit replacement for worn or damaged Wade 3000 Series dome and flashing components, helping maintain reliable rooftop drainage performance.

The WP3012-42-DOME is the replacement cast-iron dome designed for the Wade 3012 roof drain. It provides a durable protective cover that helps prevent debris, gravel, and roofing material from entering the drain body while maintaining efficient rooftop water flow. Built from heavy-duty cast iron, this dome is engineered for long service life in commercial and industrial roofing environments. It is the correct OEM replacement for the Wade 3012 drain series.

The Portals Plus 67255 Underdeck Clamping Ring is a cast-aluminum accessory designed to secure a roof drain bowl to the deck structure. By clamping the drain under the deck substrate or membrane flange, it maintains alignment and prevents movement of the drain bowl under load. It is compatible with roof drain systems that require an under-deck clamp and is suitable for both retrofit and new-construction drain assemblies. Key features: Cast-aluminum construction offers durability and corrosion...

The Portals Plus 14310 Square Tube Adapter for 3 × 3 in is designed to seal square steel-tube roof penetrations without disconnecting the penetration. It provides a retrofit flashing solution whereby the adapter fits around the square projection, seats into a compatible boot, and retains joint movement while maintaining a weather-tight seal. The molded EPDM material is resistant to ozone and UV degradation and supports a service range from –60 °F to +270 °F. Key features: Adapts 3 × 3 in...

The Portals Plus Round Adapter for 1 in OD (Item #: POR-14040) is designed to integrate non-standard or irregular roof penetrations of approximately one-inch outer diameter into a compatible retrofit flashing boot. The adapter fits around the projection, seats into an appropriate step of the boot (boot not included), and is secured via a clamp (not included). This solution enables flashing integrity without custom fabrication and ensures a positive, secure seal around unusual roof...

The Portals Plus Round Adapter for 1-1/4 in. OD (Item #: POR-14050) is designed for sealing smaller irregular or non-standard roof penetrations by adapting a 1-1/4″ outside diameter projection into a compatible retrofit flashing boot. The adapter slips around the projection, seats into the appropriate step of the retrofit boot (boot not included) and then the clamp is tightened (clamp not included) to create a secure watertight seal. This method helps avoid custom boot fabrication for odd...

The Portals Plus Round Adapter for 2 in. outer diameter (Item #: POR-14080) is designed for flashing unusual or non-standard roof penetrations by adapting a 2″ OD projection into a retrofit boot. The adapter fits around the penetration and is inserted into the proper step of the retrofit boot (boot not included); final sealing is achieved by tightening a clamp (not included). This product provides a cost-effective way to use existing boot systems rather than fabricating custom flashings. Key...

The Portals Plus Round Adapter for 7/8 in. OD (Item #: POR-13040) is designed for flashing irregular or non-standard roof penetrations by fitting around a 7/8-inch outer diameter projection and seating into a compatible retrofit boot. The adapter is secured by a clamp (not included) to ensure a watertight seal around the penetration. This solution allows use of existing boots rather than custom fabrications. Key features: Designed to accommodate 7/8″ outer diameter penetrations that standard...

Portals Plus 13010 Small Round Adapter is designed for flashing non-standard, small penetrations by adapting a 3/8-inch OD projection to a compatible retrofit boot. It provides a positive, secure flashing method for unusual shapes by fitting around the penetration and seating into the appropriate step of the retrofit boot. Final sealing is achieved by tightening a clamp over the boot and adapter for a snug fit. Key features: Adapts small or unusual 3/8″ OD penetrations to a compatible retrofit...

A reflective aluminum‑enhanced roof coating—Karnak 27 Fibered Perfectseal forms a metallic shield atop your roof surface, reflecting sunlight to protect underlying asphaltic materials from heat degradation. Infused with reinforcing fibers, it offers steadfast adhesion and thermal resistance, reducing repairs and extending roof lifespan while helping lower building temperatures during hot seasons. Key Features Forms a reflective, self-protecting shield by aluminum flake leafing to the surface...

The Portals Plus Round Adapter for 2 ½″ OD (Item #: POR-14100) is a retrofit component used to adapt round roof penetrations approximately 2.5 inches outer diameter into a compatible retrofit flashing boot. It is installed by fitting around the projection, seating into the correct step of the boot (boot not included), and tightening a clamp (not included) to achieve a watertight seal. This approach lets installers handle non-standard penetrations without full custom boot fabrication. Key...

The Portals Plus Round Adapter for 3 in. OD (Item #: POR-14120) is designed to flash small or non-standard roof penetrations by adapting a 3-inch outer-diameter projection to a compatible retrofit boot. The adapter fits around the penetration, seats into the appropriate step of the retrofit boot, and is then tightened with a clamp (boot and clamp not included). This provides a positive, secure method for flashing irregular shapes. Key features: Adapts 3″ OD penetrations to compatible retrofit...