Super Anchor Safety P6001 - Pro-Series Fall Arrester Harness , Silver

The P-6001 Pro-Series harness (silver version) is a 5-point full body fall arrest / restraint harness featuring a rear dorsal D-ring and durable silver webbing. It uses 1-3/4" polyester webbing rated at 6,000 lb and drop forged steel D-ring hardware rated at 5,000 lb tensile strength. The harness supports workers up to 320 lb including tools, with pass-through buckles for chest and legs.

Key Features

• Rear D-ring connection for fall arrest
• 1-3/4" polyester webbing (6,000 lb minimum breaking strength)
• Drop forged steel D-ring (5,000 lb tensile)
• Pass-through chest and leg strap buckles
• Inspection / warning labels permanently attached

• Brand / Model: Super Anchor Safety P6001 Pro-Series Fall Arrester Harness
• Part Number: P6001
• Product Type: Full-body fall arrest harness (silver webbing)
• Weight: ~3.8–5.2 lb (varies by size; verify on label)
• Dimensions (Packed): ~12 in L × 10 in W × 6 in H (approximate)
• Dimensions (Web Width): ~1.75 in (44 mm) primary webbing
• Material: High-tenacity polyester webbing; polyester/nylon stitching (contrast for inspection)
• Hardware: Alloy/steel dorsal D-ring; steel/aluminum adjusters and buckles (plated for corrosion resistance)
• Color / Finish: Silver webbing with high-visibility accents and durable label pack
• Attachment Points: Dorsal D-ring (fall arrest)
• Adjustability: 5-point adjustment (legs, chest, torso) for secure, ergonomic fit
• Leg / Chest Buckles: Quick-connect or tongue-buckle configuration depending on variant (confirm on label)
• Sub-Pelvic Support: Integrated support for balanced suspension comfort after arrest
• Lanyard Keepers: Breakaway keepers to manage idle connectors and reduce snag hazards
• Impact Indicator: Deployment/impact indicator provides remove-from-service cue
• User Capacity: 130–310 lb including tools/clothing (typical ANSI range; verify on product label)
• Intended Use: Personal fall arrest with compatible ANSI-rated SRLs or energy-absorbing lanyards
• Comfort Features: Moisture/UV-resistant webbing, smooth-edge hardware, and padded contact zones on select variants (verify configuration)
• Compliance: Designed to meet OSHA 1910/1926; conforms to ANSI Z359.11 (full-body harness) when used per instructions (verify edition)
• Inspection: Pre-use and periodic competent-person inspections of webbing, stitching, labels, hardware, and indicators
• Environmental Resistance: Webbing resists abrasion, UV, and light chemical exposure; hardware is corrosion-resistant
• Included: Harness only (lanyards/SRLs, anchors, and connectors sold separately)

• Select the correct size (SS through SXL).
• Put on harness by slipping into shoulder straps and adjusting the back pad.
• Fasten chest strap using pass-through buckle and tighten.
• Secure leg straps using pass-through buckles and adjust snugly.
• Connect lanyard or SRL to the rear D-ring before use.
• Inspect webbing, hardware, and labels before each use.

Q: What sizes are available in the P-6001 series?
A: SS, SM, SL, and SXL.

Q: What is the maximum user capacity?
A: 320 lb including tools.

Q: How many D-rings does it have?
A: One dorsal D-ring.

Q: What is the webbing strength?
A: Silver polyester webbing rated at 6,000 lb minimum breaking strength.

Q: Does it meet ANSI and OSHA standards?
A: Yes, it complies with OSHA 1926.502 and ANSI Z359.11-2021.