Products 1-3 of 3
Show
Chemlink Low VOC EPDM/TPO Primer, 4 Pints in a Can
A solvent based liquid primer that is designed to comply with VOC regulations
Price: $80.95
Availability: In Stock
ChemLink Item #: CHE-F1280LVOC -

    A solvent based liquid primer that is designed to comply with VOC regulations. It can be brush applied to EPDM or TPO roofing membranes, plastics, and any other difficult bonding surface. Installation Read SDS before use. Eliminate all ignition sources. DO NOT SMOKE. Mixing is not recommended, even when settling occurs. Do not thin. Thinning will affect performance. Clean debris from EPDM or TPO surface and wash with isopropyl alcohol. Brush apply the primer directly to the roof surface,...

    New!
    GreenWeld PVB Lead-Free Armored Flashing System, 19.5'...
    The Greenweld Armored Flashing System is a PVB Lead Alternative
    Price: Choose Size
    Availability: In Stock
    GreenWeld

      GreenWeld PVB Lead Sheet Alternative GreenWeld is the new industry standard for armored flashing systems. It is a LEAD-FREE monolithic sheet that provides strong waterproofing protection for a variety of flashing applications. It's heat-weldable; easy to use; non-toxic; sustainable; flexible; lightweight; malleable; moldable & durable. GreenWeld is made up of expanded aluminum mesh reinforcement bonded with a lonolithic layer of modified polyvinyl butyral (PVB). A release liner of each side of...

      New!
      Lead Vent and Pipe Flashing
      Flexible 2.5 lb lead vent and pipe roof flashing,
      Price: Choose Size
      Availability: In Stock
      Big Rock Supply

        Multi-pitch lead roof flashing are made from the highest quality and longest life materials; Ideal for all types of roofing applications. Place over PVC Pipes or cast iron pipes on a shingle or flat roof. Features- All lead construction for long lifeCan be molded to fit on shingle, clay or metal roofsFlexible up to approximately 14 degrees to fit any roof pitch up to 17/12Fits 3", 4", 5", and 6" DWV pipe Danger Lead Product ...

        Best Sellers

        Oatey 11830 Galvanized Base Roof Flashing 0.5-1.0 in. -...
        Shingle Flashings are designed to effectively seal round pipe penetrations, Slides over...
        Price: $5.10

        Slides over pipe - for pitch to 40 degrees. Rustproof, stamped galvanized, 24 or 28 gauge. Non-fading sealing collar. 12 1/2" x 9" bases for code required areas. Rated 180°F continuous heat. ESM Flashings (only) have collar and base separate to allow for easier installation. Approved for Type B installations. Not for hot-mopped or built-up roofs. Do not use petroleum based products on collars.

        Oatey 11853 Galvanized Base Roof Flashing 2 in.
        Shingle Flashings are designed to effectively seal round pipe penetrations, Slides over...
        Price: $5.25

        Slides over pipe - for pitch to 40 degrees. Rustproof, stamped galvanized, 24 or 28 gauge. Non-fading sealing collar. 13" x 9" bases for code required areas. Rated 180°F continuous heat. ESM Flashings (only) have collar and base separate to allow for easier installation. Approved for Type B installations. Not for hot-mopped or built-up roofs. Do not use petroleum based products on collars.

        Oatey 11910 Thermoplastic Base Roof Flashing 3 in.
        Shingle Flashings are designed to effectively seal round pipe penetrations, Slides over...
        Price: $4.45

        Slides over pipe - for pitch to 45 degrees. Non-fading and non-cracking, rigid black thermoplastic base. Non-fading, sealing collar. Do not use petroleum-based products on plastic bases or rubber collars. 18" x 18" bases for code required areas. Rated 180°F continuous heat. Approved for Type B installations. Not for hot-mopped or built-up roofs. Southwest/Texas base for code required areas.

        Oatey 12920 Aluminum Base Roof Flashing 1.25-1.5 in.
        Shingle Flashings are designed to effectively seal round pipe penetrations, Slides over...
        Price: $5.35

        Slides over pipe - for pitch to 40 degrees. Rustproof .032 stamped aluminum standard base. Non-fading sealing collar. 18" x 18" bases for code required areas. Rated 180°F continuous heat. Approved for Type B installations. Not for hot-mopped or built-up roofs. Soft aluminum base (18" x 18") allows for easy molding to tile roofing. Do not use petroleum based products on collars.