Exterior Finishing

The easy-to-use 12048 scaffold brackets offer convenience for residential or commercial roofing projects. They are installed over wall sheathing just below the eave height on one or all four sides of a structure to create a safe, convenient walkway for erection of roof trusses, plywood, shingle, fascia, gutters, and under-eave covering. They include a 3/16" sway brace for right or left hand use and a 5/8" safety bolt and clip. The #12020 Plate Hanger may be used to hook the scaffold bracket...

The Guardian Fall Protection Stacker Bracket Frame is the primary support mechanism for the Stacker Bracket System, and is where planks rest to form the walking surface. It is composed of durable and weather resistant powder-coated steel, and is ideal for eaves of up to 18 inches in width. The Stacker Bracket System extends 17 inches below the top plate, and allows guardrails to be installed 28 inches away from the wall. FEATURES: Durable welded steelGreat for eaves up to 18”Platform is 17”...

The Guardian Stacker Bracket End Rail - Square attaches at the ends of the Guardian Stacker Bracket scaffold system. The square shape is designed for applications where the eave of the roof does not overhang the scaffold walking surface. If the eave does overhang the scaffold walking surface, use the #61237 Stacker Bracket End Rail – Angled. Complete Stacker Bracket System is composed of: Support Bracket (#61129), Stacker Bracket End Rail – Square (#61237), Guardrail Post (#61133), Top Clamp...

The Guardian Fall Protection “Universal Guardrail Posts” are designed to work along with Guardian’s other guardrail mounting options. The product is composed of lightweight welded steel and installs easily into Guardian Fall Protection guardrail gusset mounts (15159 and 61027). The maximum spacing between each post is 8' apart.  Features: Installs easily into mountsAlso available in 52" & 74" size options (please call) Applicable Standards: OSHA 1910 & OSHA 1926 Subpart...

This Toeboard attachment is a component of the Guardian Fall Protection Stacker Bracket System. Toeboards are required on all guardrail systems if there is any risk for equipment or materials to fall to a lower surface, and are always recommended. The Toeboard attachment fits to the Stacker Bracket Frame to allow for the safe and easy installation of toeboards. Features:  Attachment for hanging scaffolding Durable  Applicable Standards: OSHA 1910 & OSHA 1926 Subpart...

The Guardian Fall Protection Top Clamp is a component of the Stacker Bracket System, which functions to provide a safe and separate hanging scaffolding system around the edge of a fall hazard, such as a rooftop. Top Clamps are manufactured in a variety of sizes to fit rails of various widths, and are composed of powder-coated steel for superior durability and weather resistance. Features:  Attaches to the Stacker Bracket FrameEye bolt brings brackets flush to outside wallDouble safety...

Men, materials and tools are smoothly raised with positive action foot pedal and easily lowered by turning a crank. Pump jack operates on your "upright" (post unit) made of two straight 2 x 4's. Uprights can be on uneven ground and in narrow spaces. Make sure, however, that ground is firm. For added safety, place 2 x 8 x 8" plate under post. Plate should be toe-nailed to upright. System will allow adjustment to a variety of corners, angles and placements up to 30' in height and creates a 24"...

Used for bracing wood poles. Poles to be constructed in accordance with operating instructions. One brace should be used for every 10' of elevation.

Allows you to attach two 2 x 4's for a strong, safe guardrail. Provides 20" of work space (works with or without the work bench).

Cut work time with a work bench right on the scaffold. Can be attached to a guardrail or pump jack.

Attaches to bottom of pump jack pole to secure pump jack. One is required for each pump jack.

Accommodates two 2" x 10" wood planks with toe boards attached Foot action does all the work Raise to position and lower with the hand crank Positive double-lock system brake secures itself to wood poles For use with fabricated wood poles constructed of spliced 2x4's up to 30 ft. in height Hand crank specifically designed to maximize performance and durability

Designed to secure fabricated wood poles to building Provides rigid steel triangular bracing as required by OSHA

For wood staging Works with pump jack system Workbench allows tools and materials to travel with the work platform

Provides mud sill in loose soil conditions (grass, dirt, clay, and sand) Provides additional margin of safety and security when used in accordance with instructions Fits double 2 x 4 wood poles