Super Anchor Safety

The Vertical Wall anchors are designed for exterior wall applications as an overhead anchorage device that is nearly invisible from the ground. Fabricated from 11-gauge 430 stainless steel in two models to adapt to varying slope roofs. The install at the wall plate and top chord junction with a single bolt and 4 16d vinyl sinkers that are supplied with each anchor. Perfect for siders, window installers and painters. Can be painted for minimum visual effect. Designed to accommodate the bird...

The Vertical Wall anchors are designed for exterior wall applications as an overhead anchorage device that is nearly invisible from the ground. Fabricated from 11-gauge 430 stainless steel in two models to adapt to varying slope roofs. The install at the wall plate and top chord junction with a single bolt and 4 16d vinyl sinkers that are supplied with each anchor. Perfect for siders, window installers and painters. Can be painted for minimum visual effect. Designed to accommodate the bird...

Safety Bar Temporary/Reusable Anchor The Safety Bar is a unique fall protection anchor for use while working with open truss situations. It spans 3 trusses and locks in securely with detent pins while gauging the trusses 24” on center. 2 users and tie off to the safety bar with the use of a shock absorbing lanyard or SRL’s. Our Safety Bar is the only product on the market for open framing fall protection and is used by framing crews across the country for OSHA compliance during the absolute...

Combo Safety Bar for 2×4 and 2×6 trusses The Safety Bar is a unique fall protection anchor for use while working with open truss situations. It spans 3 trusses and locks in securely with detent pins while gauging the trusses 24” on center. 2 users and tie off to the safety bar with the use of a shock absorbing lanyard or SRL’s. Our Safety Bar is the only product on the market for open framing fall protection and is used by framing crews across the country for OSHA compliance during the...

Tie-Off Straps are made from 2” wide polyester or nylon and are designed for use as temporary anchorage points to connect vertical lifelines, SRL’s, web lanyard and rope lanyards. Use on wood, steel and concrete structures. Tie-Off straps are wrapped, cinched around the structure to make for a secure anchor or can be embedded into concrete and evacuated when finished with the job. Please see the part number list below for Application, Length, Compliance and Packaging information for all our...

Tie-Off Straps are made from 2” wide polyester or nylon and are designed for use as temporary anchorage points to connect vertical lifelines, SRL’s, web lanyard and rope lanyards. Use on wood, steel and concrete structures. Tie-Off straps are wrapped, cinched around the structure to make for a secure anchor or can be embedded into concrete and evacuated when finished with the job. Please see the part number list below for Application, Length, Compliance and Packaging information for all our...

Tie-Off Straps are made from 2” wide polyester or nylon and are designed for use as temporary anchorage points to connect vertical lifelines, SRL’s, web lanyard and rope lanyards. Use on wood, steel and concrete structures. Tie-Off straps are wrapped, cinched around the structure to make for a secure anchor or can be embedded into concrete and evacuated when finished with the job. Please see the part number list below for Application, Length, Compliance and Packaging information for all our...

Tie-Off Straps are made from 2” wide polyester or nylon and are designed for use as temporary anchorage points to connect vertical lifelines, SRL’s, web lanyard and rope lanyards. Use on wood, steel and concrete structures. Tie-Off straps are wrapped, cinched around the structure to make for a secure anchor or can be embedded into concrete and evacuated when finished with the job. Please see the part number list below for Application, Length, Compliance and Packaging information for all our...

Designed specifically for the Metal Building industry, our Super Z-Purlin provides an easy to install anchorage device that includes attachment bolts. The stem height of the anchor is compatible with high rib roofing panels and blanket type insulation. Waterproofing is achieved using a high quality E.P.D.M. gray colored flashing boot and matching stem cover that has an aluminum flange allowing it to be configured easily to any shape panel. The anchor stem features a collapsible design that...

Metal Roof Anchor The stem height of the anchor is compatible with high rib roofing panels and blanket type insulation. Waterproofing is achieved using a high quality E.P.D.M. gray colored flashing boot and matching stem cover that has an aluminum flange allowing it to be configured easily to any shape panel. The anchor stem features a collapsible design that will arrest a fall and also reduce the shock load to the Z-Purlin by several hundred pounds. The Super Z-Purlin anchor can be installed...

Most roof anchor installations require the removal of shingles to install. This can pose a problem, especially on older roofs with brittle shingles. No need to remove the ridge cap to install fall arrest anchors because this flashing allows you to install anchors directly over your existing roofing material.The D- Minus anchor can be mounted directly over existing asphalt shingle roofs without removing any shingles. To cover the anchor and fasteners and protect it from the elements we invented...

Fall arrest or work positioning for one person with a maximum body weight of 310 lbs (140 kg) including tools and equipment. An energy absorber is required. Not rated for use with SRL's, Horizontal Lifelines, multiple users, Window Washing, Fall Arrest Side-Loading or Reverse-Loading. Can be used on roofs up to 12:12 pitch. 1076 includes stainless steel spiral shank nails & butyl flashing Instruction Manual ...

The Omega modified-D auto lock carabiner has been the standard connector used by Super Anchor Safety for over 12 years. Anodized for high visibility and durability, the 1/2" diameter Auto-lock will outlast and outperform even the best snap hook on the market. Order as a standard component, accessory or on our custom fabricated webbing and lifelines. Rated for 24KN or 5,395 lbs. Meets ANSI Z359 Standard.

1” wide nylon webbing / 9800 lb. test Complies with all OSHA, ANSI standards

1” wide nylon webbing / 9800 lb. test Complies with all OSHA, ANSI standards

1” wide nylon webbing / 9800 lb. test Complies with all OSHA, ANSI standards

1” wide nylon webbing / 9800 lb. test Complies with all OSHA, ANSI standards

1” wide nylon webbing / 9800 lb. test Complies with all OSHA, ANSI standards

1” wide nylon webbing / 9800 lb. test Complies with all OSHA, ANSI standards

1” wide nylon webbing / 9800 lb. test Complies with all OSHA, ANSI standards

1” wide nylon webbing / 9800 lb. test Complies with all OSHA, ANSI standards

1” wide nylon webbing / 9800 lb. test Complies with all OSHA, ANSI standards

Hands-Free Movement While Moving Up the Lifeline But Resists Downward Movement User must physically unlock the cam mechanism by squeezing the rope grab Features a dual-cam mechanism for use on all 5/8" lifelines An arrow indicator is stamped onto the rope chamber of the rope grab and must always point to the anchor attachment end of the lifeline in order to function properly

Automatic Dorsal Panic Prevents Unintentional Disengagement For use with 5/8” rope lifeline only Open On/Open Off design Stainless Steel construction Complies with all OSHA, ANSI and CSA standards