Fall Protection

The Safewaze 023-4096 Standing Seam Swivel Anchor is a reusable, non-penetrating anchor point designed for flat or pitched standing seam roofs with a minimum roof gauge of 26. It attaches to a variety of standing seam profiles using four S-5-U clamps and provides a dedicated fall arrest connection point without penetrating the roof panel. The anchor features an adjustable crossarm that spans 24" to 40" and locks with detent pins, allowing it to fit different standing seam spacing. A 360°...

The Safewaze 024-4109 Reach Anchor Assembly is a portable anchorage system designed to let workers remotely connect to an elevated anchor point before entering an at-height work area. It helps provide an anchorage option for the first worker needing fall protection in a location where an overhead or elevated connection point is available. The Reach Anchor Assembly uses a two-stage setup. First, the reach anchor is connected to the elevated anchor point without the added weight of an SRL. After...

The Safewaze 025-4126 Standing Seam Bar Anchor is a reusable, non-penetrating anchor point designed for standing seam roof applications. It installs onto compatible standing seams using stainless steel set screws with nylon tips, helping provide a secure fall protection connection point without penetrating the roof panel. This anchor includes a 360° swivel D-ring connection point for use with compatible SRLs, energy absorbing lanyards, and VLLs. The swivel D-ring helps support worker movement...

The Safewaze 025-4129 Standing Seam HLL Anchor is a reusable, non-penetrating anchor designed for flat or pitched standing seam roofs with a minimum roof gauge of 26. It provides a fall arrest connection point for standing seam roof applications and is built with an adjustable cross arm that spans 24" to 40" to fit a range of seam spacing. This anchor includes a 360-degree swivel D-ring that can be used with SRLs, energy absorbing lanyards, VLLs, and HLLs. The system can be used as a...

The SafeWaze FS811-4 Cross Arm Strap is a lightweight, reusable anchorage solution designed for tie-off on structural beams or cross-arm configurations. Featuring durable polyester tubular webbing and two pass-through D‑rings, it installs quickly without hardware and provides a mobile fall arrest anchor point wherever needed.

The SafeWaze Concrete Anchor Strap – Soft Loop provides a versatile and disposable anchorage solution for concrete embeds. Constructed with reinforced polyester webbing and wear sleeve protection, each strap features dual soft-loop ends designed to slip securely over rebar. Lightweight and easy to install, these straps support fall arrest loads and meet ANSI Z359.18‑2017 Type A and OSHA requirements for structural anchorage.

The SafeWaze FS‑EX10‑100‑G (NorthStar Classic) is a 100 ft galvanized steel cable self‑retracting lifeline designed for overhead anchorage (ANSI Class 1). It features a swivel top for enhanced mobility, a heavy-duty polymer housing with carry handle, and a load‑indicating swivel snap hook. An integrated braking system softens arrest impact for improved fall protection performance.

The SafeWaze Latitude Pro 7′ Single Web SRL‑P is a Class I self‑retracting lifeline made for overhead anchorage in arc flash and high-heat environments. It includes 7 ft of flame-resistant Kevlar® webbing, enclosed in a clear resin housing for visual inspection of internal components, and features a sealed internal centrifugal braking system that does not require a shock pack. This model uses the 9013 behind-the-web bracket with a swivel steel carabiner, and is offered in four connector...

The SafeWaze Latitude Pro 7′ Single Web SRL‑P series combines overhead-class fall protection with arc-rated materials. Each unit includes 7 ft of Kevlar® webbing, housed in a translucent resin casing for visual checks, and a sealed internal centrifugal braking system—no shock pack needed. Equipped with the 9013 Behind-the-Web bracket and swivel top carabiner, these Class I SRLs are ideal for welding, electrical, and high-heat environments. Available in four connector variants: steel or...

The SafeWaze Latitude HD 11′ Dual Web Self‑Retracting Lifeline is a Class A dual-leg SRL engineered for high-mobility fall protection in construction, maintenance, and utility environments. It features 11 ft of ultra-high molecular weight webbing with sewn-in fall indicators, mounted in a rugged aluminum housing with swivel-top and internal braking system for smooth operation and minimal fall impact. Choose between steel snap hooks or steel rebar hooks configurations—both provide secure 100%...

The SafeWaze Latitude Pro 7′ Dual Web SRL‑P series delivers dual-leg fall protection with premium ultrahigh molecular weight webbing, housed in a clear resin case for easy internal inspection. An internal centrifugal braking mechanism offers smooth and reliable arrest performance with no external shock pack required. Equipped with a 9013 Behind-the-Web bracket and swivel top carabiner, this Class I SRL supports continuous dual-leg tie-off. Four connector options are available—steel or aluminum...

The SafeWaze Latitude Pro 7′ Dual Web SRL‑P series delivers superior fall protection with dual-leg ultra-high molecular weight webbing and swiveling overhead anchorage. Designed with a clear resin housing for visual inspection and a sealed internal braking system for dependable performance, each unit features the FS‑EX313 bracket and steel carabiner. Available with four connector configurations—steel or aluminum snap or rebar hooks—it supports Class I ANSI-compliant overhead use with dual-leg...

The SafeWaze Latitude Pro 7′ Single Web SRL‑P series is a lightweight, Class I self-retracting lifeline engineered for overhead anchorage. It features 7 ft of ultrahigh molecular weight (Dyneema®) webbing, contained within a translucent resin housing that enables easy visual inspection of internal components. The internal centrifugal braking system eliminates the need for an external shock pack, ensuring robust fall arrest performance. Available in four connector configurations—steel or...

The SafeWaze Latitude Pro 7′ Single Web SRL‑P series provides durable, Class I fall protection for workers in construction, utility, and industrial settings. Each model features 7 ft of ultra-high molecular weight webbing contained in a translucent housing that allows for visual inspection of internal components. A sealed internal braking system eliminates the need for an external shock pack, providing reliable fall arrest with minimal arrest distance. Available in four connector...

All variants are part of the SafeWaze Latitude Pro 7′ Single Web SRL‑P series — Class I self‑retracting lifelines featuring 7 ft (2.1 m) ultrahigh molecular weight webbing housed in translucent resin casing. Each model includes an internal braking system, semi-sealed assembly, and 360°/180° swivel top attachment. Designed for overhead anchorage (ANSI Class I), they meet ANSI Z359.14‑2021 and OSHA fall protection standards.

The SafeWaze Latitude Pro Arc Flash 7′ Dual Web SRL‑P series provides premium, arc-rated dual-leg fall protection designed for extreme heat applications including welding, hot work, and arc flash zones. Each model features a dual-leg Kevlar® webbing system encased in clear side-payout resin housing for internal visual inspection. A sealed internal braking mechanism ensures fast, reliable arrest without requiring shock absorbers. This Class I SRL is equipped with a 9012 Behind‑the‑Web bracket...

The SafeWaze Latitude Pro Arc Flash 7′ Dual Web SRL‑P is engineered for arc-rated dual-leg fall protection in high-heat and electrical environments. It includes dual-leg Kevlar® webbing, a translucent side-payout resin housing for internal inspection, and a sealed internal centrifugal braking system. Designed for overhead anchor use with dual-leg tie‑off capability, each unit features a 9013 Behind‑the‑Web bracket and a swivel-compatible carabiner. Available in multiple connector options—steel...

The SafeWaze Latitude Pro Arc Flash 7′ Single Web SRL‑P series offers Class I overhead fall protection in arc-rated environments. With 7 ft of flame-resistant Kevlar® webbing, a clear resin side-payout housing for internal viewing, and a sealed internal braking system (no shock pack), these units deliver reliable arrest performance. Each model features a 9013 Behind‑the‑Web bracket, steel swivel carabiner, and one of five connector types: steel snap hook, steel rebar hook, aluminum snap hook,...

The SafeWaze 022‑5308 Latitude Pro Arc Flash 7′ Single‑Web SRL‑P is built for arc flash and hot-work environments, combining Kevlar® webbing, a non‑conductive soft loop attachment, and a dielectric snap hook. Housed in a translucent resin casing with side-payout design, it features an internal centrifugal braking system—eliminating the need for an external shock absorber. The unit pivots freely via a 360/180° swivel, enhancing mobility. Designed to deliver safety, visibility, and arc-rated...

The SafeWaze Lodestar Leading Edge Cable SRL is a Class 2 cable self-retracting lifeline designed for leading-edge fall hazard areas. Featuring 3/16″ galvanized steel cable in rugged housing, this unit includes an external energy absorber, a load-indicating snap hook, a steel carabiner, and a swivel top anchor for optimized mobility. Engineered to reduce lock-ups during walking and working, this SRL delivers reliable arrest performance for high-risk environments. Certified for ANSI...

The TB3-6067 is an economical full-body harness designed with tongue buckle leg straps and a 3 D-ring configuration for fall arrest and positioning. It includes hi-viz polyester webbing, a dorsal D-ring, and two side D-rings, with dual fall indicators to ensure safety readiness. Available in HM (medium) and HL (large) sizes, this harness supports users up to 340 lb and complies with ANSI and OSHA standards. Features Lightweight, economical full-body harness 3 D-rings: dorsal and two side...

The 6101 Deluxe harness is a premium full-body safety harness built for comfort and durability in fall protection applications. It features a fully padded frame (Tri-Lam3), integrated 2-inch utility belt with 16 grommets, and quick-connect buckles on chest and legs. The harness supports single-user fall arrest and restraint use, is OSHA/ANSI/CSA compliant, and comes in five sizes — GHS, GHM, GHL, GHLL, and GHX — to match a range of user weights and dimensions. Features Padded frame and waist...

The TB3-6070 series is a full-body tongue buckle harness featuring a 3 D-ring configuration for fall arrest and positioning. Built with breathable mesh padding and hi-viz polyester webbing, it provides long-term comfort without a waist belt. The TB3-6070 supports up to 310 lb in sizes HS through HX, and up to 400 lb in the H2X model, meeting ANSI, OSHA, and CSA standards for fall protection. Features Tongue buckle leg straps for secure fit Quick-connect chest buckle 3 D-ring configuration:...

The Form-It is a temporary use roof anchor that can be installed onto a flat surface or a pitched roof. Anchor legs are pre-bent to 25-degrees. Easy to adjust the anchor by hand to match the roof pitch. Installs with 10 of the 16d vinyl sinkers through the sheathing and into a top chord. Maximum exposure time is 6 months from install date. Evacuate by removing or flattening the anchor stem over. Features: Fall Arrest Rated for 5,000 pounds14 gauge zinc plated steelAttached with 10 ea. 16d...

A complete assembly of engineered components required to rig a HLLS (horizontal lifeline system). Designed specifically for use with SAS commercial anchors, these kits can also be used with other mfg. equipment when engineered by a qualified person. Each Kit contains attachment bolts, lock nuts, couplers and wire rope. Specify the HLL length, and factory swage option at time of ordering. We also offer numerous parts to achieve a HLL system that works for your products including: Rigging Kits:...

A tough, temporary reusable anchor that conforms to steep or flat roofs. The Flex Chain Anchor uses heavy-duty zinc-plated steel legs and a flexible 6 mm rubber hinge with a link-chain and 3″ connector ring for fast, reliable tie-off on wood-framed structures. Rated 5,000 lb and supplied with both nails and WS screws, it’s built for quick installs, everyday durability, and compatibility with SAS engineered HLL kits. Features Temporary & reusable: Installs on wood framing; remove and relocate...

The Super Anchor 4020 series is a 5/8" diameter, 3-strand Poly-Dac value vertical lifeline designed for fall arrest and vertical tie-off applications. It comes terminated with a double-locking Z359-rated snaphook and is available in multiple lengths (25, 30, 50, 75, 100 ft) to suit various jobsite heights. With a high tensile strength (approximately 9,300 lb) the 4020 lifeline balances strength and flexibility for everyday vertical fall protection use. Key Features 5/8 inch diameter 3-strand...

Built for vertical lifeline work where dependable arrest and fast positioning matter, this MAX Force energy absorber pairs a compact, pack-style tear-away unit with a double-locking snaphook and a mechanical rope grab. The setup delivers controlled arrest forces during a fall while giving you smooth, precise movement on the lifeline. Tough webbing, a protective pack cover, and clear labeling make inspections quick and keep your kit in service longer. Features MAX Force pack-type energy...

The Energy Absorber is one of the most critical components for fall protection and is required by OSHA when workers are exposed to a free fall hazard. Designed to limit maximum arrest forces while slowing the descent, our absorbers feature patented domestic manufactured tear webbing and the highest quality connectors. MAX Force personal energy absorbers are manufactured at our factory in Monroe, WA and are ensured for component compatibility with all Super Anchor Safety Personal Protection...

Engineered for streamlined tie-ins and controlled fall arrest, the 6184 pairs a compact MAX Force energy absorber with a lightweight aluminum auto-lock carabiner and a forged D-ring termination. The result is clean connection management at the harness, fast clip-ins at the anchor, and predictable performance when it matters most. Rugged webbing, a protective pack cover, and clear labeling keep inspections quick and uptime high. Key features MAX Force pack-style energy absorber limits arrest...

The CRA-4 4-Way anchor line allows multiple horizontal lifeline segments to intersect on a single anchor point. Models 1032-4G, 1033-4G, 1042-4G offer riser heights of 12", 18", and 24" respectively, with foam-filled risers and a cast loop top. Each unit is rated for a 5,000 lb minimum base tensile strength and is engineered to support intersection of up to four HLL directions. Key Features Multi-direction horizontal lifeline intersection anchor (4-Way) Foam-filled riser for durability and...

The 6501 to 6504 series are flexible energy-absorbing web lanyards designed for single user fall arrest or work positioning. Each model uses internal shock-absorbing webbing to limit peak fall forces while allowing extension and retraction of the lanyard. They are built to ANSI and CSA standards with 3,600 lb rated connectors and peak force approximately 900 lb at 6 ft free fall. Key Features Energy-absorbing web lanyard for one person Internal shock tear webbing design 3,600 lb rated...

The P-6001 Pro-Series harness (silver version) is a 5-point full body fall arrest / restraint harness featuring a rear dorsal D-ring and durable silver webbing. It uses 1-3/4" polyester webbing rated at 6,000 lb and drop forged steel D-ring hardware rated at 5,000 lb tensile strength. The harness supports workers up to 320 lb including tools, with pass-through buckles for chest and legs. Key Features Rear D-ring connection for fall arrest 1-3/4" polyester webbing (6,000 lb minimum breaking...

The Tie Down PX2 Hybrid is a mobile fall protection system built for rooftop work where anchorage requirements can vary by surface. The unit can be used with penetrating steel spikes or a concrete attachment, allowing it to work across concrete, TPO, EPDM, and built-up roofing applications. It supports fall arrest and fall restraint configurations and includes removable ballast weights, flat-free tires, and a storage toolbox for jobsite use. Key features: Hybrid penetrating and non-penetrating...

The Tie Down 71094 Socket Guardrail Base Assembly is a non-penetrating guardrail base engineered for rooftop edge safety without drilling into the roof substrate. It is the lightest guardrail base in the United States at approximately 58 lb and features nesting/storage capable plates, toe board slots, and handle holes for easier handling. Designed for both temporary and permanent applications, it meets OSHA 1910 and 1926.502 standards and installs without tools, offering over 30% faster...

The BlueWater SafetyRail 2000 galvanized system provides a modular, non-penetrating rooftop guardrail solution using galvanized steel rails, weighted bases, locking pins, and protective pads. Rails connect to bases via a positive locking pin system, and the bases include EPDM pads to protect roof membranes. The system supports setup without drilling, making it suitable for both temporary and long-term installations. Key features: Galvanized steel rails in lengths 5′, 7.5′, 8′, and 10′ Cast...

The BlueWater SafetyRail 2000 (PC Yellow) system is a modular, non-penetrating rooftop guardrail solution composed of rails, bases, locking pins, and protection pads. Rails in this system are available in multiple standard lengths and connect to counterweighted bases via locking pins. The system is designed for fast installation without drilling, making it suitable for temporary or permanent guardrail installations. Key features: Multiple rail lengths available (4’, 5’, 6’, 7.5’, 8’, 10’) in...

This anchor is intended for permanent installation on wood truss structures to provide a secure attachment point for fall-protection systems. It features a stainless-steel construction designed for long-term use and includes a fixed D-ring connection point. The anchor installs directly onto the truss and provides a reliable tie-off location for personal fall-arrest equipment. Key features: Designed for permanent installation on wood truss structures Stainless-steel body for long-term...

Built for everyday fall-arrest duty, the 6014-60 combines a compact, pack-style energy absorber with a secure snaphook and a versatile loop end for quick, clean connections. The protective pack cover shrugs off abrasion and grime, while durable webbing and clear labeling make inspections fast—so crews spend less time fiddling and more time working safely at height. Key Features Integrated pack-type energy absorber limits arrest forces in a fall. 60 in (≈5 ft) working length for streamlined...

This harness is designed for industrial applications where heat, spatter, and harsh conditions are present. It uses a Nomex/Kevlar blend webbing for burn and spatter resistance, includes back and side D-rings for both arrest and positioning, quick-connect leg buckles, and plated alloy steel hardware. It is non-belted and provides five-point adjustability for high-demand use. Key features: Nomex®/Kevlar® blend webbing throughout shoulders, torso and legs for burn and spatter resistance. ...

This tower-climber–grade full body harness is designed for demanding vertical access work and positioning. It includes six connection points (back, chest, sides and seat), a 6-inch waist support pad with memory foam, padded leg and shoulder elements, a removable saddle seat reinforced with internal aluminum bars, tongue-buckle leg closures with nine grommeted adjustment positions, and a quick-connect chest buckle with visual indicator. The Small size provides fit for smaller-built users while...

The Guardian Fall Protection 01296 Double-Leg Shock Absorbing Stretch Lanyard is a flexible and reliable fall arrest solution designed for 100% tie-off applications. The twin-leg design allows workers to remain connected to one anchorage point while moving to another, ensuring continuous fall protection. Its stretchable webbing reduces slack, minimizing trip and snag hazards, while the integrated shock absorber limits fall arrest forces in the event of a fall. Built with heavy-duty...

The Guardian Fall Protection 21301 Big Boss Extended Lanyard is a high-strength fall arrest solution built for workers in need of extended reach and increased capacity. Measuring 6 ft. in length, this single-leg lanyard is constructed from heavy-duty polyester webbing and incorporates an integrated shock absorber that minimizes fall arrest forces. Designed to support users carrying additional tools and gear, the Big Boss series is rated for higher capacity than standard lanyards. Equipped with...