FallTech 7429SS - Permanent Truss Anchor Roof

Most roof anchor installations require the removal of shingles to install. This can pose a problem, especially on older roofs with brittle shingles. No need to remove the ridge cap to install fall arrest anchors because this flashing allows you to install anchors directly over your existing roofing material. The D- Minus anchor can be mounted directly over existing asphalt shingle roofs without removing any shingles.  To cover the anchor and fasteners and protect it from the elements we...

Weld-on D-Ring Anchor with Unplated Installation Plate Features: Forged D-ringPlain/Uncoated Steel Plate for Weld-on or Bolt-on ApplicationsCan be installed wherever weld-on applications are preferredProvides Simple Overhead Anchorage SolutionFor use on steel I-beams, columns and other steel structuresHeavy-duty steel construction2" x 4-1/2 plate with 1/2" holes Anchorage Location:  Select a suitable anchorage point that will support the strength requirement and minimize free fall and...

The D-Minus anchor is our most economical fall arrest anchor and is available in gray powder coated 11-gauge mild steel or 11-gauge 430 stainless steel. Installs with 6 factory supplied stainless steel spiral shank nails or an optional #12 screws. This anchor is specified for use on asphalt shingle roofing and is low profile making them difficult to notice on the roof. This anchor can be used for new construction, reroof or retrofitting onto existing roofs. In addition, this anchor can be used...

FallTech 7410M Reusable, Hinged Roof Anchor with heavy duty D-ring is constructed using alloy steel with a yellow chromate finish. Manufactured for attachment to metal decking, its hinged design conforms to most roof peaks and can be mounted perfectly flat Features 10" x 3" anchoring plates with 2-1/4" connecting D-ringHinged design conforms to flat or sloped surfaces up to 12/12 pitch.Includes 2-1/2" sheet metal screws for steel deck and metal roof installationFor temporary reusable...