OSHA Residential Fall Protection

The Guardian Fall Protection Temper Reusable Roof Peak Anchor (00455) is a heavy-duty, cost-effective fall protection anchorage connector designed for temporary installation on residential and commercial roofing projects. Made from zinc-plated steel, this anchor installs over the roof peak and provides a secure tie-off point for a single worker. Its reusable design makes it ideal for contractors who work across multiple jobsites, while the included fasteners simplify installation. Compact...

The Guardian Fall Protection Two-Way Standing Seam Roof Anchor (10600) is designed for safe and secure attachment on standing seam metal roof systems. Featuring a two-way tie-off design, it provides dual-direction anchorage for improved mobility and flexibility. Constructed of durable, corrosion-resistant steel, the 10600 anchor clamps directly onto standing seams without penetrating the roof surface, preserving roof integrity. Its reusable design makes it ideal for both temporary and...

The Guardian Bull Ring Anchor (00484) is a durable and reusable roof anchor designed for wood substrates. Made from galvanized steel (also available in stainless steel), this anchor features a pivoting bull ring that offers 360° loading for flexible fall arrest tie-off options. Lightweight and easy to install using included fasteners (nails or lag screws), it’s ideal for residential projects where anchor repositioning is needed. Rated for one user (130–420 lb) and tested to a minimum breaking...

A compact, economical shingle-roof anchor that blends in and installs fast. The D-Minus uses a 7/8" connector hole instead of a D-ring and mounts with six fasteners into wood framing. Choose gray powder-coated 11-ga steel or 11-ga 430 stainless to match your environment. For retrofit installs over existing shingles, pair it with the RetroFlash flashing to cover the anchor and fasteners for a clean, weather-protected finish. Features Low-profile, shingle-roof design — specified for asphalt...

The Guardian Fall Protection Premium Cross Arm Strap Anchorage Connector is a heavy-duty anchorage device designed to create a secure tie-off point for fall protection systems. Constructed from high-strength polyester webbing with reinforced stitching, this strap is more durable than standard models and built for repeated use in tough jobsite conditions. Each strap includes both a large and small steel D-ring, allowing for easy cinch-down installation and secure attachment of lanyards or...

The ACRO 12070 Steep-Pitch Guardrail System includes a bracket and post designed to provide fall protection, slide-guard, and toeboard on eave edges of roofs with slopes ranging from 4/12 to 16/12. Easy to install and remove like a roof bracket, it interleaves with shingles and supports 2×4 cross-rails and a toe board setup. Lab-tested to OSHA 2011 requirements, it facilitates early guardrail installation—even before shingle installation or removal—without damaging roofing materials. With a...

The Guardian Cross Arm Strap (01620) is a durable, reusable anchorage connector that simplifies fall protection tie-off. The strap is made of reinforced polyester webbing and features both a large pass-through D-ring or loop and a small connection D-ring. Loop it around a structural anchor, pull the small D-ring through the larger loop or ring to cinch securely, then connect your lanyard or SRL. Lightweight and easy to reposition, the 6 ft strap supports single-user fall arrest and integrates...

FEDERAL OSHA 1926.502(B)(3): Guardrail system shall be capable of withstanding, without failure, a force of at least 200 pounds (890N) applied within 2 inches (5.1 cm) of the top edge, in any outward or downward direction, at any point along the top edge. PRODUCT SPECIFICATIONS: Base: Durable high strength plastic Dimensions: 8½ (L) x 5¾ (W) x 5¼ (H) FEATURES: Durable high strength plastic Pliable, yet flexible to withstand harsh job-site environments and abuse Reusable Safety orange for high...

The Guardian Fall Protection Snappy Disposable Roof Anchor (00710) is a cost-effective, temporary fall protection solution for residential and commercial roofing projects. Made from galvanized steel, each anchor is lightweight yet durable, designed to be easily nailed onto a wood roof surface to provide a secure tie-off point for personal fall arrest systems. Once a project is completed, the anchors can be left behind or removed as needed. This bulk pack of 25 anchors is ideal for contractors...

The D-Minus anchor is our most economical fall arrest anchor and is available in gray powder coated 11-gauge mild steel or 11-gauge 430 stainless steel. Installs with 6 factory supplied stainless steel spiral shank nails or an optional #12 screws. This anchor is specified for use on asphalt shingle roofing and is low profile making them difficult to notice on the roof. This anchor can be used for new construction, reroof or retrofitting onto existing roofs. In addition, this anchor can be used...

The RS-20 anchor is a permanent roof anchor designed specifically for tile, slate, wood and synthetic roofing materials. The 20” long strap allows you to adjust the reveal of the D-ring for your specific roofing material and the unique design of the anchor also allows you to physically bend the D-ring portion of the anchor up and over the tile or slate so that it lays flat on the surface. This permanent, low profile anchor comes with stainless steel attachment hardware and comprehensive...

The Guardian Halo Reusable Anchor (00482) is a ridge-mounted fall protection point engineered for residential roofs. Featuring a rubber-hinge design that allows it to straddle roof ridges and a chain-mounted O-ring that moves with the user, this zinc-plated steel anchor supports a 5,000 lb minimum breaking strength. It installs easily with included fasteners into wood or metal decks, works on pitches up to 12/12, and is suitable for personal fall arrest, restraint, or work positioning systems....

This roof anchor is designed for permanent installation under wood roof ridge materials and leaves the D-ring exposed for fall-protection equipment attachment. It features a stainless-steel body with a 17″ nailing surface and a 2″ connecting D-ring. The package includes 16D stainless-steel nails for installation to wood structures, and the anchor meets OSHA 1926.502 regulations for fall-arrest anchorage. Key features: 17″ stainless-steel nailing plate designed for installation under roof...

The Safety Bar is a temporary, reusable open-framing anchor that gives crews a safe tie-off point before sheathing or full bracing. It spans three trusses, locks in with stainless detent pins, and automatically gauges trusses at 24" on center. Rated for two users and compatible with shock-absorbing lanyards or SRLs, it’s a fast, rugged solution for truss-stage fall protection. Features Made for 2×4 top chords: Model 1010 sized for 2×4 trusses; bars for other sizes available separately. ...

The Moveable ARS 2x8 is a permanent, flashed roof anchor designed to mount to 2x8 top chords and stay in place for the life of the roof. It provides a low-profile tie-off point you can position to suit the shingle layout, then seal in with the included flashing kit for a clean, watertight finish. Built for single-person fall arrest or restraint with a 5,000 lb rating, it uses heavy-duty hardware for a rigid, durable connection and a molded stem cover to keep water out and the installation...

A reusable, hinged roof anchor for fast, reliable tie-off on wood-framed roofs. The 3006 mounts at the ridge or in the field and accepts nails (included) or approved screws. Built from 11-gauge zinc-coated steel and rated to 5,000 lb for single-user fall arrest/restraint, it conforms to steep pitches or lays flat on the deck and meets common OSHA/ANSI requirements. Features 1-person roof anchor for wood framing; install at ridge or field locations. 11-gauge zinc-coated steel construction for...

This roof anchor is designed for permanent installation under wood roof ridge caps to provide a secure tie-off point for fall-protection systems. It features a 12″ stainless-steel nailing plate and two 2-¼″ plated alloy-steel D-rings. The unit includes 16D stainless-steel nails for installation on wood roof structures and is engineered to meet the requirements for overhead anchorage in wood-roof applications. Key features: Stainless-steel 12″ nailing plate designed for wood roof ridge...

The Guardian Ridge-It Permanent Roof Anchor (00510) is a durable and discreet anchorage solution designed for residential roofs. Featuring double D-rings spaced across an 18-inch stainless and zinc-plated steel body with a butyl sealing strip for watertight installation, this permanent anchor installs under roofing shingles for a low-profile appearance. Supporting one personal fall arrest system with a minimum breaking strength of 5,000 lb, it offers safety without compromising roof...

#1 selling anchor for reroof, new construction and remodeling. The low-profile design is aesthetically pleasing and is designed to last the life of the structure. The Retro-Fit is designed to give all who access the roof a reliable tie-off point. Installs with just 8 nails and comes with special butyl waterproof flashing strips to seal the stainless-steel nails. Fabricated with 430 stainless steel and certified for over 5,000 pounds. Use over asphalt shingle, wood shake or metal roofing, the...

This overhead anchorage connector is designed for fixed position installation onto steel I-beams, columns or other steel structures using user-supplied fasteners. The anchoring plate measures 2″ × 4½″ and is made of alloy steel. The forged alloy D-ring provides a 5,000-lb minimum static strength tie-off point. The unit complies with ANSI Z359.18-2017 for fall protection anchorages. Key features: Forged D-ring and bolt-on plate designed for use on steel I-beams, columns and other steel...

The ACRO 12075 Open Edge Guardrail System provides comprehensive fall protection around roof edges by combining a bracket and interchangeable post. Crafted for use on rake-edges of any pitch and eave-edges up to 4/12, this system installs similarly to standard roof brackets, interleaves with shingles, and supports 2×4 cross-rails and toe boards without damaging roofing materials. When paired with the 12070 Steep-Pitch Guardrail System along steeper eaves, it forms a complete perimeter safety...

The Guardian Fall Protection Residential Guardrail System (15173) provides a safe, easy-to-install, and OSHA-compliant fall protection solution for residential roofing applications. Designed to work with pitched roofs and framing, this system creates a secure perimeter guardrail without requiring roof penetration. Adjustable for various pitches, the 15173 system supports standard lumber rails and offers durable steel construction with a powder-coated finish to resist jobsite wear. Lightweight...

The Guardian Fall Protection Cross Arm Strap Anchorage Connector (01640) is a compact 3 ft anchorage device designed to provide a secure tie-off point for fall protection systems. Made from high-strength polyester webbing with reinforced stitching, this strap is both durable and lightweight. It features a large steel D-ring and a smaller D-ring to create a reliable connection for lanyards or lifelines. With its cinch-down installation, the 01640 can be quickly wrapped around beams, pipes, or...

Tie-Off Straps are made from 2” wide polyester or nylon and are designed for use as temporary anchorage points to connect vertical lifelines, SRL’s, web lanyard and rope lanyards. Use on wood, steel and concrete structures. Tie-Off straps are wrapped, cinched around the structure to make for a secure anchor or can be embedded into concrete and evacuated when finished with the job. Please see the part number list below for Application, Length, Compliance and Packaging information for all our...

The Combo Safety Bar is a temporary, reusable open-framing anchor designed to protect crews during the truss-setting phase—before sheathing is installed. It spans three trusses, auto-gauges spacing at 24 inches on center, and locks on with stainless detent pins. The dual-size saddle design fits both 2x4 and 2x6 top chords, so one bar covers multiple framing packages. Rated for two users when used with appropriate PFAS components, the bar provides a rugged, highly visible tie-off point that...

The Guardian Cross Arm Strap (SKU: 01625) is a versatile, reusable anchorage connector constructed with robust polyester webbing and galvanized steel D‑rings. Simply loop it over a beam or compatible structure, pass the small D‑ring through the larger one to cinch tight, and attach your lanyard or SRL. At 6 feet long and weighing around 1.7 lb, the strap enables safe tieoffs in various fall-protection applications and supports a single worker, delivering a reliable 5,000 lb minimum breaking...

The RS-10 is a compact, stainless steel retrofit anchor designed for fast, watertight installs on new or existing shingle roofs. At 8-1/2" long, it sits over the roofing material and provides a low-profile, single D-ring tie-off for routine access, service work, and permanent protection. Rated to 5,000 lb and compliant with OSHA/ANSI, it’s a rugged, one-person anchorage you can trust at the ridge, hip-ridge, or in the field. Features Built for shingles & retrofits: 8-1/2" length allows...

The Guardian Fall Protection Cross Arm Strap Anchorage Connector (01630) is a reliable cinch-down anchorage device designed for quick and secure tie-off. Made from high-strength polyester webbing, this 4 ft strap wraps around beams, pipes, or structural members to provide a safe fall protection connection. It features one large and one small steel D-ring for easy attachment of lanyards or lifelines. Lightweight and portable, this connector installs in seconds without tools and is reusable for...

Tie-Off Straps are made from 2” wide polyester or nylon and are designed for use as temporary anchorage points to connect vertical lifelines, SRL’s, web lanyard and rope lanyards. Use on wood, steel and concrete structures. Tie-Off straps are wrapped, cinched around the structure to make for a secure anchor or can be embedded into concrete and evacuated when finished with the job. Please see the part number list below for Application, Length, Compliance and Packaging information for all our...

This overhead anchorage connector is constructed for permanent mounting on steel I-beams or columns. It features a 2″ × 4½″ unplated alloy steel anchoring plate ideal for weld-on installation, and a plated alloy steel D-ring rated at 5,000 lb minimum static strength. The unit also provides ½″ bolt holes for optional fixed-position installation when welding is not used. Key features: 2″ × 4½″ unplated alloy steel anchoring plate optimized for weld-on installation Plated alloy steel D-ring rated...

Purpose-built for tile and slate roofs, the 2815T is a permanent, low-profile double D-ring anchor that slides under the last course so only the rings show. Its extended strap (with ~40" between D-rings) lets you hit structure while keeping a clean look, and it installs without penetrating the sheathing. A factory butyl strip and stainless fasteners help deliver a water-resistant, long-lasting tie-off point that meets OSHA/ANSI. Features Tile/slate ready: Designed for high- and low-profile...

The ACRO 12048 Steel Wall Scaffold Bracket is a heavy-duty attachment designed to install over wall sheathing just below eave height, enabling safe and stable walkway staging for tasks like installing trusses, plywood, shingles, fascia, gutters, and under-eave treatments. Constructed from robust steel and finished in powder-coated safety yellow, it incorporates a 3/16" sway brace (swapable for right or left use) and is secured with a 5/8" safety bolt and clip for added stability. Each bracket...

The Guardian Truss Boss Anchor Kit (00420) is a truss-mounted anchorage solution engineered for early installation during residential construction. This kit enables safe pre-placement of anchor points before roof trusses are erected, allowing instant fall protection tie-off as the truss is installed. Made from non-corrosive galvanized steel, and including flashing and a weatherproof cap, it forms a watertight seal once the roofing is installed. Lightweight and quick to install without...

The Guardian Fall Protection CB-1-B Bolt-On Wall Anchor (00600) is a permanent fall protection solution designed for use on wood, steel, or concrete wall structures. Constructed from heavy-duty galvanized steel, this anchor provides a secure tie-off point for fall arrest, restraint, or work positioning applications. The CB-1-B is designed for bolt-on installation, offering long-term durability and stability, making it ideal for both residential and commercial construction environments. Fully...

The Guardian Fall Protection Guardrail Post (15175) is a 42-inch steel post designed for use with Guardian’s guardrail systems to provide OSHA-compliant fall protection. Rugged, reusable, and powder-coated for corrosion resistance, this post installs easily into compatible bases, clamps, or gussets and securely holds standard 2×4 or 2×6 lumber rails. Suitable for both temporary and permanent applications, the 15175 guardrail post is an essential component for creating reliable, code-compliant...

The Guardian Fall Protection Universal Guardrail Post (61133) is a 52-inch steel guardrail post designed for use with Guardian guardrail systems to provide OSHA-compliant fall protection. Taller than standard 42-inch posts, this universal post offers additional height for enhanced safety, particularly where extra coverage is needed on rooftops, decks, stairways, or elevated work platforms. It accepts standard 2×4 or 2×6 lumber rails and installs easily into compatible bases, clamps, or...

The Guardian Fall Protection Swivel Concrete Anchor (00242) is a heavy-duty, reusable anchorage connector designed for concrete surfaces. Featuring a 360° swiveling D-ring, this anchor allows lifelines, SRLs, and lanyards to rotate freely, reducing line tangling and improving worker mobility. Constructed from high-strength steel with a zinc-plated finish for corrosion resistance, the 00242 provides a reliable tie-off point for fall arrest and restraint systems. It installs quickly into cured...

The Malta Dynamics A6351 Roof Anchor features a 360-degree swivel D-ring, offering flexible and secure tie-off for fall protection systems on wood structures. This premium anchor allows the worker to move freely in any direction without compromising safety. Made from heavy-duty galvanized steel, the A6351 is built to perform in demanding environments and meets both OSHA and ANSI standards for rooftop anchorage. key words: 360° swivel D-ring provides maximum mobility while remaining tied off...

The Guardian Fall Protection Beamer 2000 Fall Arrest Anchor (00101) is a versatile and reusable anchor point designed for use on structural steel I-beams. Adjustable to fit beam flanges ranging from 3.5 to 14 inches wide and up to 1.25 inches thick, it provides a secure and OSHA-compliant tie-off point for fall arrest systems. Constructed from durable steel and aluminum components, the Beamer 2000 installs quickly without tools and can be repositioned as needed, making it an excellent choice...

This truss anchor kit is designed for permanent installation on wood roof truss members 2 × 4 or larger. It features a 10-3/4-inch stainless steel post with an 11/16-inch connecting eye, a weather-resistant post cap with zip-tie, and a 10-inch roof flange. The kit includes stainless steel nails for installation and meets OSHA 1926.502 fall-protection anchorage requirements. Key features: 10-3/4″ stainless steel post with 11/16″ connecting eye  Weather-resistant post cap with zip-tie and...

A permanent roof anchor engineered for pre-engineered metal buildings that use Z-purlins. The Super Z-Purlin Anchor provides a discreet, code-compliant tie-off point for routine access and service work. The single pack includes everything needed for a watertight install—anchor, stem, EPDM flashing with vulcanized aluminum strip, Grade 8 bolts, and the installation manual—so crews can achieve a clean, reliable finish in one visit. Rated to 5,000 lb for one user, it’s built from...

Built for metal building purlin structures, this permanent Z-purlin anchor provides secure, single-user connection for both fall arrest and fall restraint. The 11-gauge 430 stainless steel body resists corrosion, while an EPDM flashing base with a vulcanized aluminum strip helps seal out weather. Rated to 5,000 lb minimum breaking and tensile strength, it’s a rugged, long-term solution for rooftop safety on industrial and commercial sites. Features Dual-mode safety: Supports fall arrest and...

A compact, jobsite-tough anchor strap designed to create a quick tie-off around beams, posts, or truss chords. One end features a slotted D-ring that lets the strap cinch cleanly and stay put; the opposite end uses a small D-ring for your connector. The 36-inch length is easy to route in tight spaces, and the heavy-duty webbing stands up to daily use while staying flexible for fast installs. Features 36 in overall length for tight or confined anchorage points Heavy-duty, abrasion- and...

The Guardian Fall Protection Window Gap Anchor (15176) is a portable, adjustable anchorage connector designed for installation in window and wall openings. Its innovative design uses a compression fit to create a secure tie-off point without the need for drilling or fasteners. Made from durable, powder-coated steel, the Window Gap Anchor is reusable and easy to transport, making it ideal for temporary applications. Designed for use in construction and industrial environments, the Guardian...

The Guardian Fall Protection Stair Mount Guardrail System (61141) provides a secure and OSHA-compliant guardrail solution for stairways on residential, commercial, and industrial job sites. Designed to work with standard 2×4 lumber, this system creates stable stair rails that meet OSHA requirements for fall protection and worker safety. Constructed from high-strength powder-coated steel, the 61141 system is lightweight, durable, and reusable, making it an essential accessory for temporary...

The Safety Bar 1011 is a temporary, reusable open-framing anchor built specifically for 2x6 top chords. It spans three trusses, locks in place with stainless detent pins, and gives crews a safe, stable tie-off point during the hardest stage to protect—before roof sheathing is installed. Rated for two users and rugged enough for everyday jobsite use, it sets spacing, speeds production, and helps maintain compliant fall protection from the moment trusses go up. Features Purpose-built for 2x6...

The Guardian Fall Protection Stair Mount Guardrail System (61140) is a versatile fall protection solution designed specifically for stairways. Unlike the 61141 model which uses 2×4 lumber rails, the 61140 is engineered to work with Guardian’s standard guardrail posts, allowing for quick installation of compliant stair guardrails. Constructed from powder-coated steel, the 61140 system provides durability, reusability, and long-term resistance to jobsite conditions. Lightweight and easy to...

The Guardian Fall Protection Bolt Hole Anchor (00230) is a reusable, portable anchorage connector designed for use in precast concrete or steel bolt holes. Constructed from high-strength alloy steel, this anchor installs quickly into compatible holes, creating a secure tie-off point for fall arrest, work positioning, or restraint. Lightweight and compact, it is ideal for applications where mobility and reusability are required. The 00230 provides reliable safety at height and is fully OSHA and...