Price: $173.89
Item #GUA-00710
Write a review!
Quantity:
Description
The Guardian Fall Protection Snappy Anchor is a disposable anchorage connector designed to fit a wide variety of wood roof pitches. The Snappy is convenient, easy to install and remove, and meets all applicable OSHA regulations. To use, simply adjust the Snappy to fit over selected roof ridge, then nail into roof truss using all fastener installation holes. Supplied with all necessary fasteners.
Features:
- Single Use
- Can be bent to fit any roof pitch
- Convenient and disposable
- Easy to install by nailing into the truss
- Fasteners included
- Complies with OSHA 1926:502(d)(15)
- Just hammer over the attachment point when the job is done and reinstall roofing substrate over destroyed anchor point
- 25/case
Applications:
Personal Fall Arrest:
- Snappy anchors may be used in personal fall arrest applications to support:
- Max 1 personal fall arrest system (PFAS) structure must withstand loads applies in the directions permitted by the system of the directions permitted by the system of at least 5,000 lbs.
- Applicable D-rings: Dorsal
Restraint:
- Snappy Anchors may be used in Restraint applications. Restraint systems:
- Prevent workers from reaching the leading edge of a fall hazard. Always account for fully deployed length of lanyard/SRL.
- Structure must withstand loads applied in the directions permitted by the system of at least 1,000 lbs.
- No free fall is permitted.
- May only be used on surfaces with slopes up to 4/12 (vertical/horizontal).
- Applicable D-rings: Dorsal, Chest, Side, & Shoulder.
*Notes: Must be installed in wood substrates only - Minimum substrate thickness: 3 1/2" combined thickness - All fasteners must be fully embedded in substrate.
Specifications
- Standards: OSHA 1926 Subpart M & 1910
- Material: Steel
- Worker Capacity: 130-420 lbs.
- Performance: Maximum Users- 1; 5,000 lb Minimum Breaking Strength
Reviews (0) • Write a review!
This product has no reviews yet. Write a review!
Guardian Fall Protection 00242 Swivel Concrete Anchor
Works well for both temporary or permanent applications
Price: $89.44
Availability: In Stock
Usually ships within 1-2 Business Days
The Guardian Fall Protection Concrete Swivel Anchor is specially designed to include a visual indicator that allows the user to clearly see when it is installed correctly (when proper torque is reached, the red cap will break away to display a green cap). This anchorage connector is composed of galvanized steel, making it capable of functioning in a variety of rough environments, and rotates 180° to allow for increased mobility.Features: Easy to installVisual indicatorPivots and swivels...
Guardian Fall Protection 00250 Standing Seam Roof Clamp
Reusable Temporary Anchor Point / 24" to 36" Spacing
Price: $297.09
Availability: In Stock
Usually ships within 1-2 Business Days
The Guardian Fall Protection 00250 Standing Seam Roof Clamp is designed to be used with SRL's up to 50 ft. in length. It functions to attach to metal roof seams spaced from 24 to 36 in. apart, while allowing the attached SRL to rotate a full 360 degrees * Can be used up to 65 ft. in length if used in combination with the retractable swivel adapter * Features: Reusable AnchorEasy to install360 degree rotationCompatible with Guardian SRL's up to 50 ft. Tech Data: Worker Capacity Range: 130...
![]()
New!
RACE Fall Protection RK-50 Kit, Complete w/50' Rope...
w/ 50 ft Rope Lifeline
Price: $113.95
Availability: In Stock
Usually ships within 1-2 Business Days
Kit includes: Vest Harness that has 5 points of adjustmentResusable roof anchor made of galvanized steel and is for use on wood or metal roofs50′ length – 5/8” Rope Lifeline with snap hook and rope grab attached with a 3’ energy absorbing lanyardBag Meets: OSHA 1926.502 – ANSI Z359.11 – ANSI A10.32 – ANSI Z359.13 – ANSI Z359.18 – ANSI Z359.15Universal sizing: (S-XL) ...
Guardian Fall Protection 00455 Temper Reusable Roof Peak...
Temporary use on wood rooftops. Hinged, D-ring connection. Fasteners included
Price: $21.47
Availability: In Stock
Usually ships within 1-2 Business Days
For use on roofs from flat to 12/12 pitch, wood or metal. 5000 lb. anchor point. Fasteners included. Tested and approved for metal roofing applications, minimum 20 gauge metal or thicker, attached directly onto the surface. For metal installation: use (16) screws (8 per side), 6 in center column of fastener installation holes, in 1 hole left of center and 1 hole right of center. Guardian recommends HILTI Kwik-Pro self-drilling screws. Features: Designed for temporary use on wood rooftopsFits...