FALLTECH Anchors

This anchor is designed for secure attachment to parapet walls without penetrating the structure. It clamps onto parapets from ½″ to 15″ thick and requires a minimum height of 9″. Protective rubber pads prevent damage to surface material. The anchor includes a primary D-ring for fall arrest, restraint and suspension applications and an additional D-ring for optional tie-back use. Key features: Tool-free clamp-on installation with no fasteners required Adjustable to fit parapet wall thicknesses...

This roof anchor is designed for permanent installation under wood roof ridge materials and leaves the D-ring exposed for fall-protection equipment attachment. It features a stainless-steel body with a 17″ nailing surface and a 2″ connecting D-ring. The package includes 16D stainless-steel nails for installation to wood structures, and the anchor meets OSHA 1926.502 regulations for fall-arrest anchorage. Key features: 17″ stainless-steel nailing plate designed for installation under roof...

This roof anchor is designed for permanent installation under wood roof ridge caps to provide a secure tie-off point for fall-protection systems. It features a 12″ stainless-steel nailing plate and two 2-¼″ plated alloy-steel D-rings. The unit includes 16D stainless-steel nails for installation on wood roof structures and is engineered to meet the requirements for overhead anchorage in wood-roof applications. Key features: Stainless-steel 12″ nailing plate designed for wood roof ridge...

This overhead anchorage connector is designed for fixed position installation onto steel I-beams, columns or other steel structures using user-supplied fasteners. The anchoring plate measures 2″ × 4½″ and is made of alloy steel. The forged alloy D-ring provides a 5,000-lb minimum static strength tie-off point. The unit complies with ANSI Z359.18-2017 for fall protection anchorages. Key features: Forged D-ring and bolt-on plate designed for use on steel I-beams, columns and other steel...

FallTech pass-thru anchor slings provide durable anchorage for fall-protection systems on approved structural members. Each model features 1-3/4 inch polyester webbing, forged alloy-steel D-rings, and an integrated 3-inch wear pad designed to reduce abrasion and protect the primary strap. The series includes a 3 ft version (7336), a 4 ft version (7348), and a 6 ft version (7372), offering flexibility for different anchorage points. All three anchors are reusable and designed to meet ANSI and...

Heavy-duty 1 3/4" polyester webbing with rugged forged alloy-steel hardware.3" wear pad protects primary webbing from cuts and abrasion.Ideal for I-beams and other properly rated structural members.Economical and lightweight.Can be used repeatedly.Meets the requirements of OSHA 1926 and ANSI Z3591-3/4" load-bearing web with 3" wide full-length wear pad for abrasion resistanceAppropriately sized alloy steel D-rings provide simple pass-through choke-on installation.May be passed-through multiple...

This anchor is designed for temporary fall-protection use in existing window or door openings during construction stages when frames are open. It installs tool-free via a clamp-in, non-penetrating method and adjusts for openings from 21″ to 51″ wide. The body is built from lightweight extruded aluminum and uses durable steel clamping feet to grip structural frames without marring surfaces. It complies with OSHA 1926.502 requirements for temporary anchorage. Key features: Tool-free clamp-in,...

This overhead anchorage connector is constructed for permanent mounting on steel I-beams or columns. It features a 2″ × 4½″ unplated alloy steel anchoring plate ideal for weld-on installation, and a plated alloy steel D-ring rated at 5,000 lb minimum static strength. The unit also provides ½″ bolt holes for optional fixed-position installation when welding is not used. Key features: 2″ × 4½″ unplated alloy steel anchoring plate optimized for weld-on installation Plated alloy steel D-ring rated...

The FallTech 7348 Pass-Through Anchor Sling is designed to provide a durable, reusable anchorage connection on properly rated structural members such as I-beams or scaffolding. Built with heavy-duty 1-3/4″ polyester webbing and reinforced with a 3″ wide wear-pad, this 4-foot length sling includes two forged alloy-steel D-rings—a large pass-through D-ring and a smaller connection D-ring—to allow quick wrap/choke installation and attachment of lifelines or SRLs. Rated at 5,000 lb static strength...

This truss anchor kit is designed for permanent installation on wood roof truss members 2 × 4 or larger. It features a 10-3/4-inch stainless steel post with an 11/16-inch connecting eye, a weather-resistant post cap with zip-tie, and a 10-inch roof flange. The kit includes stainless steel nails for installation and meets OSHA 1926.502 fall-protection anchorage requirements. Key features: 10-3/4″ stainless steel post with 11/16″ connecting eye  Weather-resistant post cap with zip-tie and...

This extender adds 18 inches of overhead or over-the-shoulder reach to the harness dorsal D-ring, facilitating easier attachment of lanyards or self-retracting lifelines. It uses a heavy-duty ¼″ galvanized steel cable, alloy steel O-ring, and an alloy steel snap hook with steel thimbles and swaged aluminum ferrules for secure connection. Use of the extender will increase the user’s total fall-clearance distance when paired with an energy-absorbing lanyard. Key features: Provides improved...

The FallTech 7446 Removable Concrete Anchor is designed for temporary anchorage in cured concrete walls and ceilings where reuse is required. With a forged O-ring connection point and full 360° swivel orientation, it installs into a pre-drilled hole (minimum 4-1/2″ depth, maximum 1″ diameter) and is assembled with galvanized and stainless-steel components. Suitable for use with horizontal lifeline (HLL) systems, the anchor has a static strength rating of 6,000 lb minimum. Key features: Forged...

The FallTech 7451AC Rotating D-Ring Anchor, Without Fasteners, provides a high-quality anchorage option for steel or cured concrete installations where user-supplied fasteners are used. It features a stainless-steel anchoring plate, a plated alloy-steel connecting D-ring with full 360° rotation via a precision-cut bushing, and is designed for both temporary and permanent installation. The anchor plate and D-ring assembly are reusable to support multiple onsite setups. Key features:...

The FallTech 7408 Toggle-Through Eyebolt Anchor for Steel is constructed for temporary and reusable anchorage on steel structures. It installs into hole sizes ranging from 13/16″ minimum up to 1-1/4″ and on steel substrate thickness up to 1-1/4″. It is designed for use where quick relocation of anchor points is required, particularly in steel construction or rigging setups. Key features: Installs on steel substrate up to 1-1/4″ thick and hole sizes from 13/16″ to 1-1/4″ Designed for fast...

The FallTech 7393BS is a high-capacity structural anchorage connector designed for fall-protection systems. This rotating bolt-on D-ring anchor includes a Grade 8 installation bolt and nut, offers 10,000 lb static strength rating, and features a D-ring assembly that rotates 360° and pivots 180° to accommodate connection alignment. It is suitable for bolting onto properly rated structural members. Key features: D-ring assembly rotates 360° and pivots 180° for optimal alignment and connection...

The FallTech 7451A Rotating D-Ring Anchor with Concrete Screw provides a reusable anchorage solution for cured concrete walls or ceilings. It features a plated stainless-steel anchor plate and an alloy-steel D-ring assembly with a precision bushing that allows full 360° rotation for improved connector alignment. The anchor uses a concrete screw installation method for efficient setup and can be used for temporary or permanent anchorage. Key features: Stainless-steel anchoring plate with plated...

The FallTech 7428 Cable Pass-Through Sling Anchor is made for creating fast, reusable anchorage points on properly rated structural members such as I-beams. It uses a ¼-inch vinyl-coated galvanized steel cable for durability in tough job-site environments, alloy-steel O-rings designed for pass-through choke-on installation (including a smaller O-ring for SRL or lanyard connection), and swaged aluminum ferrules with steel thimbles. The vinyl coating adds protection from abrasion and easy...

The FallTech 7451C Rotating D-Ring Anchor with Concrete Expansion Bolt provides a strong anchorage connection for fall-protection applications in cured concrete. It includes a stainless-steel anchor plate, an alloy steel D-ring assembly that rotates 360° through a precision-cut bushing, and a concrete expansion bolt with a torque-indicating cap for accurate installation. Designed for both temporary and permanent use, the anchor plate and D-ring are reusable. Key features: Stainless-steel...

The FallTech 7393B Rotating Bolt-On D-Ring Anchor provides a fixed structural anchorage point with full rotation and pivoting capability. The D-ring assembly rotates 360 degrees and pivots 180 degrees to help align with the user’s movement and connection direction. Rated to 10,000 pounds, this anchor is designed for bolt-on installation to suitable structural surfaces using user-supplied fasteners. Key features: 360-degree rotating D-ring for full connection alignment 180-degree pivoting...

The FallTech 7491 Hinged Trailing Rope Adjuster is a stainless-steel device designed for use on compatible vertical synthetic rope lifelines. It features a hinged body that allows user installation anywhere along the lifeline, a cam-action braking mechanism that locks under sudden load, a tension roller plus internal spring for smooth mobility while climbing, and an anti-inversion hinge cam and double-locking closure for enhanced safety. Key features: Hinged design allows installation at any...

The FallTech BeamLock™ Anchor (model 7540A14) is designed for mobile anchorage use on horizontal I-beams and H-beams with flange widths from 4″ to 14″ and up to 1¼″ thick. It features an aluminum crossbar, steel clamping jaws with replaceable wear-pads, dual adjusting jaws with concealed locking thumb latches, and a centered alloy-steel D-ring on the crossbar for lifeline attachment. The system includes both short and long replaceable wear pads to facilitate trailing applications and maintain...

The FallTech 78012WCSWE Post Anchor with Welded-Eye is a durable, permanent anchorage solution designed for use on wood, concrete and steel structures. The unit features a welded 1-1/4″ × 2″ eye for connection of fall-arrest components, a galvanized steel post and base plate (16″ × 16″ × 1/2″), and elevates the user’s attachment point above the working surface. Designed for excellent durability and structural compatibility, this anchor requires user-supplied fasteners for installation and is...

This anchor is intended for permanent installation on wood truss structures to provide a secure attachment point for fall-protection systems. It features a stainless-steel construction designed for long-term use and includes a fixed D-ring connection point. The anchor installs directly onto the truss and provides a reliable tie-off location for personal fall-arrest equipment. Key features: Designed for permanent installation on wood truss structures Stainless-steel body for long-term...