Adhesives and Sealants

ChemLink M-1 Structural Adhesive Sealant is a moisture-cure, multi-purpose adhesive and sealant used for bonding and sealing a variety of construction materials. It forms a durable, elastomeric, waterproof bond suitable for conditions where structural adhesion and weather resistance are required. This 10.1 oz cartridge is designed for use with a standard caulking gun and is formulated to apply effectively in damp, dry, and cold climates. The solvent-free, polyether formula is capable of...

ChemLink DuraLink 50 Super Adhesion Sealant is a moisture-curing elastomeric sealant formulated to bond and seal in construction joints subject to significant movement. It is designed to provide a flexible, weather-resistant barrier on a range of substrates commonly found in roofing, siding, and architectural applications. This case includes 24 individual 10.1 oz tubes intended for use with standard sealant guns. The sealant is suitable for joints where flexibility and adhesion are needed...

ChemLink NovaLink 35 Elastomeric Sealant is a moisture-curing, multi-purpose construction sealant formulated for use in a range of climate conditions, including damp, dry, and cold environments. It is designed to bond to common building materials and provide durable joint sealing with elastomeric performance that accommodates movement. This product is sold as a case of 24 tubes and can be applied with standard sealant tools. The formula is solvent-free, does not shrink after curing, and...

Lucas #9600 Joint & Termination Sealant is a 100% solids non-shrinking moisture cure urethane sealant intended for sealing large joints and roof termination bars. Minimal odor, contains no solvents and less than 10 grams per liter VOC. Excellent adhesion to concrete, masonry, EPDM, PVC, wood, vinyl and most other common building materials. APPLICATION To use this product cut the tip to the desired size and puncture the foil seal. Small orifice size and/or an incompletely punctured seal may...

ChemLink Clear Polyether Sealant is a moisture-curing sealant designed to provide flexible, long-lasting joints in construction and roofing applications. It forms a weather-resistant, elastomeric seal that remains clear after curing and is suitable for a variety of substrates where a transparent sealant is desired. This product is supplied in 10.1 oz tubes and sold as a case of 24. It is formulated to cure in damp, dry, and cold conditions and to resist discoloration from UV exposure. Key...

Lucas #6600 Universal Sealant is a high performance, multipurpose thermoplastic elastomer based sealant. Excellent adhesion to most surfaces including: metal, Kynar®, asphalt, shingles, modified bitumen, EPDM, TPO, Elvaloy/PVC, Hypalon, vinyl, fiber cement, wood, concrete, tile, masonry, glass. #6600 is available in clear, black, white and various colors (see reverse). Ideal for residential roofing applications where appearance is important. * Non-Standard colors available. Please view chart...

The ChemLink F1425 1-Part Sealer is a single-component, moisture-curing sealer used for detailing work in roofing and building envelope applications. It is formulated as a fluid-applied material for sealing seams, penetrations, and transitions where a spreadable sealer is preferred over a tooled bead. This product is supplied in 2-liter foil pouches and sold as a 4-pack. The one-part formulation eliminates on-site mixing and supports consistent application in field conditions. Key Features...

The ChemLink E-Curb 3-In MiniCurb Kit is a prefabricated penetration sealing solution for small roof penetrations such as electrical conduit, drains, HVAC supports, and mounts for solar or lighting equipment. It includes molded E-Curb curb components and the associated 1-part pourable sealer and adhesive/sealant required to create a watertight penetration seal. This MiniCurb system is built with slip-fit components that assemble around the penetration without disturbing it and is compatible...

High-performance, multipurpose thermoplastic elastomer based sealant for metal seams, metal roofing, siding, window frames, door frames, vinyl windows, Flashings etc on all types of roof membranes. Excellent adhesion to most surfaces including: metal, Kynar, asphalt, shingles, modified bitumen, EPDM, TPO, Elvaloy, PVC, Hypalon, vinyl, fiber cement, wood, concrete, tile, masonry, glass. Use to seal flashings and penetrations on all types of roofs or general leak repairs. Packaged in 10.1 oz....

The ChemLink E-Curb 6 In. MiniCurb Kit is a factory-assembled penetration seal solution designed for sealing round roof penetrations such as conduit, drains, mounts, and other supports. Prefabricated E-Curb components are slip-fit around existing penetrations and paired with sealant products to form a watertight perimeter without field-built pitch pans. This kit combines precast nylon resin curb pieces with the necessary sealer and adhesive/sealant to support a full installation around the...

The ChemLink F1428 1-Part Sealer is a moisture-curing, fluid-applied sealer used for detailing work in roofing and building envelope applications. It is commonly used to seal seams, penetrations, and transition areas where a spreadable sealer is preferred over a traditional tooled bead. This product is supplied in 10.1 oz cartridges and sold as a case of 24. The single-component formulation eliminates on-site mixing and supports consistent field application. Key Features One-part,...

SureBond SB-190 is the official snow guard adhesive of SnoBlox-Snojax. We pioneered the use of this adhesive with our polycarbonate snow guards over 25 years ago and now it has become the standard in the industry. For a successful installation the adhesive requires 28 days or (672 Hours) at 50 Degrees (F) or above to achieve full cure. Temperatures below 40 Degrees (F) will delay cure time, until temperatures reach 50 Degrees (F) or above to completely cure. Spring, Summer or early Fall is the...

GREEN LINK Adhesive/Sealant is a non-shrinking polyether adhesive/sealant specially formulated to bond the KnuckleHead base to a wide range of roofing membranes including EPDM, PVC, Granulated Modified Bitumen, and TPO (with TPO primer). GREEN LINK Adhesive/Sealant is a polyether-based, moisture-cure formula that has been used in the construction industry for many years. It has earned a reputation for high performance, adhering to a wide range of roofing membranes including PVC, EPDM, Mod Bit...

OB500SS-R is the regular temperature SpotShot version of OMG’s OlyBond500 two-component polyurethane foam adhesive, supplied in 1,500 ml cartridge sets. It is designed for stand-up or hand applicators, ideal for smaller jobs, repairs, and hard-to-reach areas. The adhesive is fast-acting, low-odor, provides excellent rise and board adhesion, and cures in roughly 10-15 minutes depending on ambient conditions. Key Features regular grade formulation for temperatures 40 °F (4 °C) and above packaged...

The ChemLink ChemCurb 5 In. Rounds are precast, curved curb sections designed to form round transitions in curb flashing assemblies. These 5-inch diameter inside sections are part of the ChemCurb penetration seal system, used in combination with other ChemCurb components to create perimeter shapes around roof penetrations. This carton contains multiple curved pieces that are intended to be integrated with compatible sealants and adhesive products to form a continuous, watertight flashing...

The ChemLink ChemCurb 7. 5 In. Rounds are precast, curved curb sections used to build rounded transitions in roof curb flashing assemblies as part of the ChemCurb penetration seal system. These curved components fit with straights, corners, and other system pieces to configure curb perimeters for pipe and penetration seals. Each round section is constructed from gray precast resin and designed to work with compatible ChemCurb sealants and adhesives to form a continuous, watertight curb...

The ChemLink E-Curb 9 In. MiniCurb Kit is a prefabricated roof penetration sealing solution designed to replace traditional pitch pans and simplify sealing around round penetrations such as conduit, drains, camera supports, mounts, and other structural penetrations. Each kit uses slip-fit components that assemble around the penetration and paired sealants to form a continuous watertight perimeter. This 9-inch diameter MiniCurb kit comes with all required sealing materials included and is...

ChemLink Pro Pack Urethane Pourable Sealant is a two-component, self-leveling urethane sealant used in roofing applications that require a pourable, flexible waterproof seal. When mixed, the components cure into a tough, rubber-like mass that resists weather, water, and many chemicals. Pro Pack is used in horizontal applications such as pitch pans, penetration seals, and to bridge transitions between different roof materials. This kit includes Part A and Part B hardener and is supplied for...

Lucas #8000 100% Silicone Roof Coating* is a 98% solids moisture-cure coating intended for the repair and restoration of asphalt, modified bitumen, metal, concrete, TPO, PVC, KEE(Fibertite), Hypalon (CSPE), PIB, and EPDM roofs. Silicone’s low water absorption allows for improved ponding water resistance. Fast cure time allows for same day recoating. Lucas #8000 is low odor, and contains no solvents or water, so it will not freeze! VOC compliant in all of North America. #8500 is a thicker...

The ChemLink ChemCurb 7-5 In One-Part Kit is a complete curb flashing system for roofing applications that require a formed transition between membrane and curb surfaces. This kit combines the structural curb components with system-matched sealants to create a continuous, watertight flashing. The 7-5 inch configuration provides a larger inside diameter than the 5-inch kits, allowing it to be used on larger curb openings while maintaining a consistent system approach. All components are...

ChemLink DuraSil Translucent is a neutral-cure, high-performance silicone sealant used for weather sealing and adhesive applications on a wide range of construction substrates. It provides long-term flexibility and durability across temperature extremes and resists shrinkage and UV-induced discoloration. This translucent version is supplied in 10.1 oz cartridges and sold as a case of 24. It is suitable for sealing joints and interfaces where visible sealant is preferred to blend with...

ChemLink DuraLink 35 Sealant is a multi-purpose moisture-cure elastomeric sealant sold as a case of 24 white 10.1 oz cartridges. It combines economy and performance for a variety of sealing applications. The product offers balanced performance characteristics such as color stability and flexibility, and is paintable in many installations. Key Features Moisture-cure elastomeric sealant suitable for general sealing jobs.Paintable within 24 hours of application (paint compatibility varies).±35 %...

Designed for focused roof repair, this compact cartridge of Karnak 19 Flashing Cement provides a precise, resilient seal around details like flashing edges, seams, and vent bases. Its robust yet trowel-friendly formula ensures a dependable barrier—flexible enough to accommodate movement and tough enough to uphold long-term performance even when temperatures fluctuate. Key Features Trowel-ready consistency that applies cleanly and resists slippage on vertical surfaces Forms a tough, waterproof,...

Karnak 19 Ultra Rubberized Flashing Cement is a premium-grade, rubber-reinforced asphalt sealant formulated for both wet and dry surfaces. Packaged in a 10.1 oz tube, it’s ideal for quick and emergency repairs on roofing, chimneys, flashing, and other construction surfaces. This versatile cement offers excellent adhesion and flexibility, even under harsh weather conditions, making it a go-to choice for contractors and maintenance crews alike. Key Features Elastomeric rubberized formulation for...

The ChemLink ChemCurb 6 In. Straights are precast straight curb sections designed to lengthen and configure roof curb flashing assemblies within the ChemCurb system. These straight pieces are used to extend perimeter runs and connect with corners or rounds to form complete flashing outlines around penetrations. The 6-inch straights are constructed from gray precast resin and are intended to be used as part of a coordinated flashing assembly with compatible sealants and accessories. Key...

Lucas #8800 Universal Single-Ply Adhesive is a water based contact adhesive for securing EPDM, TPO, PVC and other single-ply membranes to wood, metal, concrete, and other type of roofing solutions. Fast drying with aggressive tack, #8800 bonds instantly without the risk of fire associated with flammable solvent based adhesive. VOC compliant in all of North America APPLICATION Surface must be clean and dry, temperature must be a minimum of 40 degrees F with humidity of less that 90% for proper...

The ChemLink ChemCurb 2 In. Corners are precast corner sections used in the ChemCurb roof curb flashing system. These 2-inch radius corner pieces allow the transition between straight sections to form square or rectangular curb perimeters around roof penetrations. Manufactured from gray precast polyester resin, they are designed for durability against UV, corrosion, ice, and ponding water. These corner pieces must be used with compatible ChemCurb straight and round components along with...

Karnak 502MS Karna‑Flex Sealant is a high-performance, rubberized mastic specifically engineered for sealing critical areas across a wide range of roof systems. Packaged in a 3-gallon pail, this single-component formula offers excellent workability and delivers a watertight, elastomeric seal that adapts to structural movement. It adheres exceptionally well to both dry and damp surfaces, making it ideal for year-round repairs in real-world jobsite conditions. Whether you're reinforcing seams,...

M-1 CR (Clean Room) is a thermosetting, moisture-cure sealant, free from solvents and isocyanates. It has been tested and approved for use in semiconductor clean rooms due to its minimal release of airborne molecular contamination at room temperature once fully cured. M-1 CR is ideal for clean rooms in the biomedical, electronics, and aerospace industries where air and surface contamination must be strictly controlled. Additionally, it is suitable for use in food processing facilities,...

OB5001-TANK and OB5002-TANK are the pressurized Part 1 and Part 2 canisters for the OMG OlyBond500 two-component polyurethane foam adhesive system. These tanks allow contractors to apply adhesive without requiring a PaceCart, making them highly portable for a range of job sizes. The system dispenses semi-liquid beads that rise ¾- to 1-inch above the substrate and cure in 4-8 minutes depending on conditions. The canisters are designed for applications where speed, mobility, and convenience are...

ChemLink F1400 1-Part Pourable Sealant is a moisture-curing, self-leveling sealant supplied in 28 oz tubes and sold as a case of 12. It is designed as a pourable sealing solution for roof details such as pitch pans and warranted penetration seals. The formulation is solvent-free, moisture-curing, and intended to create a flexible, watertight seal in a wide range of typical roofing conditions, including damp, dry, or cold climates. Key Features Pourable, moisture-curing sealant for roof...

Compact and ready for precise roof repair tasks, the 30 oz tube of Karnak 502MS Karna‑Flex Sealant is your go-to sealant for tight details and quick touch-ups. This robust, rubberized formula maintains its elasticity, sealing joints and flashing components securely even when surfaces shift or weather conditions change. Designed for direct application via caulking gun, this small-size tube delivers a neat, concentrated bond—perfect for professionals who need dependable sealing without excess...

The Karnak 19 Ultra Rubberized Flashing Cement in a 3-gallon pail is ideal for large-scale or long-term roofing repair projects. Engineered to stick in both wet and dry conditions, this heavy-duty formula seals leaks and penetrations quickly, maintaining flexibility and weather resistance over time. Designed for trowel-grade applications across a variety of roofing materials. Key Features Rubberized elastomeric formulation for superior flexibility and durability Bonds to wet or dry surfaces,...

Karnak 19 Ultra Rubberized Flashing Cement in the 1-gallon pail is a professional-grade, rubber-reinforced asphalt sealant designed for long-lasting emergency and general roof repairs. Its ability to adhere to both wet and dry surfaces makes it ideal for sealing flashing, seams, skylights, and penetrations in demanding weather conditions. Key Features Rubberized elastomeric formulation for superior flexibility and durability Wet or dry application, even sticks under water on the first build...

Sikaflex NP 1 is a premium, one-component polyurethane joint sealant designed for durable seals on interior and exterior projects. It requires no mixing and typically no primer to bond to common substrates like concrete, masonry, metals, and wood. NP 1 delivers non-sag application, excellent weathering resistance, and ±35% movement capability for long-term performance in dynamic joints. In acoustic applications, it helps reduce sound transmission by sealing gaps and perimeters. Skins within 24...

Sikaflex NP 1 is a premium, one-component polyurethane joint sealant designed for durable seals on interior and exterior projects. It requires no mixing and typically no primer to bond to common substrates like concrete, masonry, metals, and wood. NP 1 delivers non-sag application, excellent weathering resistance, and ±35% movement capability for long-term performance in dynamic joints. In acoustic applications, it helps reduce sound transmission by sealing gaps and perimeters. Skins within 24...

Karnak 28 Non-Fibered Perfectseal Aluminum Roof Coating delivers a shimmering aluminum finish that protects asphalt roofing from intense solar heat. The reflective shield preserves the flexibility of the roof surface by preventing oil degradation, while the seamless aluminum layer enhances durability, minimizes thermal load, and extends roof life. Key Features Forms a seamless, reflective aluminum shield to protect roofing oils from heat-related aging Reflects over 50% of solar radiation to...

Sikaflex NP 1 is a premium, one-component polyurethane joint sealant designed for durable seals on interior and exterior projects. It requires no mixing and typically no primer to bond to common substrates like concrete, masonry, metals, and wood. NP 1 delivers non-sag application, excellent weathering resistance, and ±35% movement capability for long-term performance in dynamic joints. In acoustic applications, it helps reduce sound transmission by sealing gaps and perimeters. Skins within 24...

Sikaflex NP 1 is a premium, one-component polyurethane joint sealant designed for durable seals on interior and exterior projects. It requires no mixing and typically no primer to bond to common substrates like concrete, masonry, metals, and wood. NP 1 delivers non-sag application, excellent weathering resistance, and ±35% movement capability for long-term performance in dynamic joints. In acoustic applications, it helps reduce sound transmission by sealing gaps and perimeters. Skins within 24...

Sikaflex NP 1 is a premium, one-component polyurethane joint sealant designed for durable seals on interior and exterior projects. It requires no mixing and typically no primer to bond to common substrates like concrete, masonry, metals, and wood. NP 1 delivers non-sag application, excellent weathering resistance, and ±35% movement capability for long-term performance in dynamic joints. In acoustic applications, it helps reduce sound transmission by sealing gaps and perimeters. Skins within 24...

Karnak 671 Karna‑Seal is a single-component, moisture-curing silicone sealant designed for long-lasting exterior performance. With exceptional UV stability and high elasticity, it resists weathering, chalking, and hardening even in ponding water conditions. Rain-safe in just one hour and suitable for both horizontal and vertical applications, Karna‑Seal delivers clean, resilient protection without sagging or the need for mixing. Key Features 100% silicone formula with excellent UV resistance...

Sikaflex NP 1 is a premium, one-component polyurethane joint sealant designed for durable seals on interior and exterior projects. It requires no mixing and typically no primer to bond to common substrates like concrete, masonry, metals, and wood. NP 1 delivers non-sag application, excellent weathering resistance, and 35% movement capability for long-term performance in dynamic joints. In acoustic applications, it helps reduce sound transmission by sealing gaps and perimeters. Skins within 24...

Sikaflex NP 1 is a premium, one-component polyurethane joint sealant designed for durable seals on interior and exterior projects. It requires no mixing and typically no primer to bond to common substrates like concrete, masonry, metals, and wood. NP 1 delivers non-sag application, excellent weathering resistance, and ±35% movement capability for long-term performance in dynamic joints. In acoustic applications, it helps reduce sound transmission by sealing gaps and perimeters. Skins within 24...

838 MS is a hybrid moisture-cure elastomer sealant formulated to encapsulate seams and fastener heads on metal roofing systems with minimal sag. The 100% solids, solvent-free formulation is isocyanate-free and exhibits less moisture sensitivity than standard polyurethanes while maintaining high tensile strength and elongation. This sealant is commonly used for sealing metal roof seams, fasteners, gutters, and roof penetrations. It conforms to the shape it is applied to, hangs vertically with...

Sikaflex NP 1 is a premium, one-component polyurethane joint sealant designed for durable seals on interior and exterior projects. It requires no mixing and typically no primer to bond to common substrates like concrete, masonry, metals, and wood. NP 1 delivers non-sag application, excellent weathering resistance, and ±35% movement capability for long-term performance in dynamic joints. In acoustic applications, it helps reduce sound transmission by sealing gaps and perimeters. Skins within 24...

Designed for critical waterproofing repairs, 160.1 Amphibicaulk is a resilient caulking‑grade roof cement that adheres reliably to both damp and dry surfaces—even under adverse conditions. Its water‑displacing formulation ensures a secure, durable seal around areas prone to leaks, such as joints, skylights, chimneys, and roof penetrations. Key Features Bonds to damp or dry surfaces with water-displacing properties Ready-to-use caulk-tube format for precise application in tight or vertical...

Sikaflex NP 1 is a premium, one-component polyurethane joint sealant designed for durable seals on interior and exterior projects. It requires no mixing and typically no primer to bond to common substrates like concrete, masonry, metals, and wood. NP 1 delivers non-sag application, excellent weathering resistance, and ±35% movement capability for long-term performance in dynamic joints. In acoustic applications, it helps reduce sound transmission by sealing gaps and perimeters. Skins within 24...

Tremco Dymonic FC is a premium, single-component, silane-modified polymer hybrid sealant engineered for high-performance sealing in dynamic building joints. It cures rapidly—skinning in as little as 60 minutes and becoming tack-free in 3–4 hours—minimizing dirt pickup and early movement cracking. With ±35 % movement capability, it accommodates expansion and contraction in joints while maintaining long-term flexibility. Once cured, it adheres tenaciously to common substrates like precast...

Karnak 97 Fibered Aluminum Roof Coating (1-Gallon) is a reflective, fiber-reinforced asphalt coating designed to protect roofing surfaces from heat, UV, and weathering. Engineered for smaller repair jobs or detailed touch-ups, the 1-gallon size offers easy handling while delivering the same high-performance formula. The aluminum finish reflects solar energy, helping extend roof life while enhancing energy efficiency, especially on aged asphalt-based systems. Key Features Reflective aluminum...

DuraSil SL is a neutral oxime cure silicone sealant intended for use in pitch pans and warranted E-Curb penetration seals. It is designed for high-temperature applications, withstanding temperatures up to 400°F (204°C). Its low durometer and resilient “elastomeric” properties allow it to handle significant movement in penetration seals. Additionally, DuraSil SL is solvent-free, contains no isocyanates, and does not shrink during curing.

The ChemLink M-1 F1277-W is a reliable, moisture-curing structural adhesive sealant in a convenient 5 oz squeeze tube. Ideal for tight spaces and quick repairs, this solvent-free, elastomeric formula works in cold, damp, or vertical applications without shrinking, outgassing, or discoloration. Bonds to a wide variety of surfaces and is paintable within 24 hours for a clean, professional finish. M-1 Data Sheet M-1 Guide Specs M-1 MSDS M-1 Brochure ...

Lucas 115 is a universal pre-cleaner for all roofs types. Its used prior to power washing. Lucas 115 cleaner is a concentrated blend of alkaline cleaners, surfactants and biocides intended for the cleaning and preparation of roofs prior to application of various roof coatings. Lucas 115 Universal Detergent, Roof Primer / Pre-Cleaner Wash Concentrate. The concentrate mixes 4:1 with water (makes 5G total). 1-gallon Pail. Price/Pail. (5G pail shown in photo; 4/case). APPLICATIONS: Mix one part...

Sikaflex NP 1 is a premium, one-component polyurethane joint sealant designed for durable seals on interior and exterior projects. It requires no mixing and typically no primer to bond to common substrates like concrete, masonry, metals, and wood. NP 1 delivers non-sag application, excellent weathering resistance, and ±35% movement capability for long-term performance in dynamic joints. In acoustic applications, it helps reduce sound transmission by sealing gaps and perimeters. Skins within 24...

838 MS is a hybrid moisture-cure elastomer sealant formulated to encapsulate seams and fastener heads on metal roofing systems with minimal sag. Its 100% solids, solvent-free formulation is isocyanate-free and exhibits less moisture sensitivity than standard polyurethanes while maintaining high tensile strength and elongation. The 750 ml resealable pouch format is well suited for sealing gutters, penetrations, and detailed repair areas where controlled dispensing and minimal waste are...

Engineered for challenging environments, Karnak 155 Amphibikote is a dependable cold-applied roofing cement that adheres to both damp and dry surfaces. Its advanced formulation allows for rapid response during unexpected roof leaks and moisture-exposed repairs, providing a secure bond in areas where standard cements might fail. Ideal for year-round use, this single-component solution brings performance, ease, and flexibility together in one compact 1-gallon can. Key Features Bonds to wet or...

838 MS is a hybrid moisture-cure elastomer sealant formulated to encapsulate seams and fastener heads on metal roofing systems with minimal sag. Its 100% solids, solvent-free formulation is isocyanate-free and exhibits less moisture sensitivity than standard polyurethanes while maintaining high tensile strength and elongation. The 5-gallon pail format is ideal for larger repair areas, extended seam runs, and restoration work where brush or pour application is preferred. 838 MS conforms to the...

838 MS is a hybrid moisture-cure elastomer sealant formulated to encapsulate seams and fastener heads on metal roofing systems with minimal sag. Its 100% solids, solvent-free formulation is isocyanate-free and exhibits less moisture sensitivity than standard polyurethanes while maintaining high tensile strength and elongation. The 2-gallon pail format is commonly used for larger repair areas, seam work, and detail applications where brushing or pouring is preferred. 838 MS conforms to the...

Features: Excellent adhesionMoisture-resistant24 hour cureOne-partHigh-strengthPaintableSuperior tooling Benefits:  Bonds to most substrates without primingMaintains bond in wet and moist conditionsEasy applicationDurable bond to substrate Industries: AutomotiveHVACManufacturingHighway Safety Substrates: SteelAluminumGalvanizedGalvalumeLaminatesFiberglassPlasticsCementWood Limitations: Not recommended for solvent sensitive plastics and foams, polystyrene or styrene ontaining...

The ChemLink 1363GR 4.5″ x 3.5″ Rectangle E-Curb Kit is a penetration sealing kit made for rectangular roof penetrations. It provides a clean way to build a sealed curb detail around box-style penetrations using a pre-formed curb system instead of field-built detailing. This kit is intended for use on common low-slope roofing systems and includes the core components needed to complete the curb seal. Key Features Rectangle curb kit for sealing box-style roof penetrations4.5″ x 3.5″ internal...

Tremco Dymonic FC is a premium, single-component, silane-modified polymer hybrid sealant engineered for high-performance sealing in dynamic building joints. It cures rapidly—skinning in as little as 60 minutes and becoming tack-free in 3–4 hours—minimizing dirt pickup and early movement cracking. With ±35 % movement capability, it accommodates expansion and contraction in joints while maintaining long-term flexibility. Once cured, it adheres tenaciously to common substrates like precast...

Versatile, high-strength, hard setting, one part adhesive sealant. Superb 2000 PSI, tensile strength with excellent impact resistance. Water and weather proof. Ideal alternative when mechanical fasteners can not be used. Features: High-strengthFlexibleExcellent memoryHard-settingOne-part Benefits: Durable bond to materialAllows for movement of dissimilar materialsDoes not become brittlePick-proofEasy applicationLong service lifeMinimizes dust pickupEasy to match substrate Industries: ...

Tremco Dymonic FC is a premium, single-component, silane-modified polymer hybrid sealant engineered for high-performance sealing in dynamic building joints. It cures rapidly—skinning in as little as 60 minutes and becoming tack-free in 3–4 hours—minimizing dirt pickup and early movement cracking. With ±35 % movement capability, it accommodates expansion and contraction in joints while maintaining long-term flexibility. Once cured, it adheres tenaciously to common substrates like precast...

Tremco Dymonic FC is a premium, single-component, silane-modified polymer hybrid sealant engineered for high-performance sealing in dynamic building joints. It cures rapidly—skinning in as little as 60 minutes and becoming tack-free in 3–4 hours—minimizing dirt pickup and early movement cracking. With ±35 % movement capability, it accommodates expansion and contraction in joints while maintaining long-term flexibility. Once cured, it adheres tenaciously to common substrates like precast...

This silicone sealant is non-flammable and designed to withstand high temperatures. It meets VOC compliance standards, making it suitable for a variety of applications, including heating systems, furnaces, automotive uses, and HVAC systems. The sealant remains resistant to UV exposure, extreme cold, and moisture. It is also approved by the USDA. With a tensile strength of 350 psi, this product offers durability and reliability. Avoid using it on galvanized metal or galvalume surfaces. For...

Lucas #777 Rubberized Flashing Cement is a premium grade trowel applied flashing cement used to Install, Repair, or Rebuild Roof Flashing at parapet walls, gravel stops, stacks, vents, monitors, and similar applications. #777 may be used with Polyester fabric reinforcement for permanent repairs to asphalt and modified bitumen roof. This product may be applied to wet and underwater surfaces APPLICATION  The surface must be clean and debris free to be repaired. Apply rubberized flashing...

Tremco Dymonic FC is a premium, single-component, silane-modified polymer hybrid sealant engineered for high-performance sealing in dynamic building joints. It cures rapidly—skinning in as little as 60 minutes and becoming tack-free in 3–4 hours—minimizing dirt pickup and early movement cracking. With ±35 % movement capability, it accommodates expansion and contraction in joints while maintaining long-term flexibility. Once cured, it adheres tenaciously to common substrates like precast...

MetaLink is a versatile neutral cure silicone construction and roof sealant, specifically formulated for use in various job site conditions. It is UV resistant and compatible with many building materials, including galvanized aluminum, metal, Kynar 500 PVDF coated metal, glass, and most roofing materials. MetaLink comes in a wide range of colors to match contemporary metal roof and siding products. It is isocyanate-free and validated for ± 50% joint movement.

Karnak 19 Flashing Cement is a high-performance, trowel-grade compound built for sealing joints, edges, and vulnerable roof features. Packaged in a convenient 1-gallon can, it’s ideal for small repairs and precision patching jobs. Its durable formulation stays flexible after curing, resisting cracking and moisture infiltration even on vertical surfaces exposed to harsh conditions. Key Features Heavy trowel-ready consistency applies easily and resists slumping Forms a flexible, resilient,...

Tremco TremPro® JS-773+ is a high-performance, single-component Non-skinning butyl sealant designed for commercial glazing, curtain wall assemblies, precast panels, and general construction joint applications. Supplied in a 20 oz sausage format, it is applied using a sausage gun for controlled placement in vertical and horizontal joints. JS-773+ cures to form a durable, flexible seal capable of accommodating joint movement while maintaining adhesion to a wide range of common construction...

A rugged, heavy-body flashing compound, Karnak 18 Perfectseal delivers a long-lasting, moisture-resistant seal on vulnerable roof areas. Its dense, trowel-ready formula combines premium asphalts, reinforcing fibers, and refined solvents, offering exceptional adhesion, vertical resistance, and flexibility for both flat and angled surfaces. Exceptionally versatile, it’s perfect for a wide array of quick repairs and complex overlays. Key Features Thick, trowel-ready consistency that resists...

Packaged for larger repair jobs, Karnak 19 Flashing Cement in the 3-gallon format is a heavy-duty, trowel-grade compound formulated for long-lasting protection at roof seams, penetrations, and flashings. With its high fiber content and superior adhesion, this asphalt-based cement provides a thick, uniform seal that resists sagging, cracking, and water intrusion—even on vertical surfaces exposed to temperature swings and direct UV. Key Features Thick, trowel-ready consistency that resists...

A heavy‑duty, cold‑applied roofing cement designed for emergency use, 155 Amphibikote delivers reliable adhesion to both wet and dry surfaces, making it a top choice for contractors and plant engineers during inclement weather. Its specially formulated blend—a fusion of premium asphalts, mineral fillers, refined solvents, and water-displacing additives—ensures robust waterproofing, pliability, and durability in critical repair situations. Key Features Bonds securely to both wet and dry...

Tremco Dymonic FC is a premium, single-component, silane-modified polymer hybrid sealant engineered for high-performance sealing in dynamic building joints. It cures rapidly—skinning in as little as 60 minutes and becoming tack-free in 3–4 hours—minimizing dirt pickup and early movement cracking. With ±35 % movement capability, it accommodates expansion and contraction in joints while maintaining long-term flexibility. Once cured, it adheres tenaciously to common substrates like precast...

The 838 Supreme FG Solvent Base Flashing / Pourable Grade Sealant is an extremely flexible, high-solids sealant designed to seal and flash major commercial roofing materials. It is formulated for multi-purpose roofing applications where a durable, elastomeric seal is required. Key Features Designed to seal and flash commercial roofing materialsExtremely flexible elastomeric formulationHigh-solids material for durable performanceExcellent sag resistanceUV stable for long-term exposureAdheres to...

The 838 MP Prime Multipurpose Primer is a water-based acrylic primer designed for use on bare metal and asphalt-coated roofing substrates. It functions as a rust inhibitor and bonding layer, helping improve adhesion for subsequent coating systems. The formulation provides stain blocking properties while preparing the surface for proper coating performance. Key Features Water-based acrylic primer formulationDesigned for bare metal and asphalt-coated surfacesProvides rust inhibiting...

838 Coatings Supreme is a two-component, semi-rigid polyurea joint filler formulated for repairing and protecting concrete control joints and cracks. Designed for environments exposed to heavy traffic, this material helps support joint edges and reduce the risk of spalling caused by repeated loads. Its semi-rigid composition allows for effective load transfer while maintaining enough flexibility to accommodate minor movement. The fast-curing formulation supports efficient installation and...

The 838 TOP Elastomeric Roof Coating is a water-based, spray-applied acrylic coating designed to form a seamless, flexible membrane over roofing substrates. Its highly reflective white finish helps reduce roof surface temperatures, while the cured coating provides protection against moisture and UV exposure. Key Features Water-based acrylic elastomeric roof coatingForms a seamless, flexible membrane after curingHighly reflective “cool roof” finish helps reduce heat buildupProtects against...

The 838 TOP Elastomeric Roof Coating is a water-based acrylic coating designed to form a seamless, flexible membrane over roofing substrates. After curing, it provides protection against moisture and UV exposure while maintaining elasticity. The gray finish offers a consistent surface appearance while delivering the same protective performance as part of a roofing system. Key Features Water-based acrylic elastomeric roof coatingForms a seamless, flexible membrane after curingHelps protect...

The 838 TOP Elastomeric Roof Coating is a water-based, spray-applied acrylic coating designed to form a seamless, flexible membrane over roofing substrates. Once cured, it helps protect the roof surface from moisture and UV exposure while maintaining elasticity over time. The sky color option provides a lighter finish while delivering the same performance within a roofing coating system. Key Features Water-based acrylic elastomeric roof coatingForms a seamless, flexible membrane after...

The 838 TOP Elastomeric Roof Coating is a water-based, spray-applied acrylic coating designed to form a seamless, flexible membrane over roofing substrates. Once cured, it helps protect the roof surface from moisture and UV exposure while maintaining elasticity over time. The 55-gallon drum is suited for large-scale applications where consistent coverage and efficient application are required. Key Features Water-based acrylic elastomeric roof coatingForms a seamless, flexible membrane after...

838 75 AM Caulk is a 100% solids elastomer sealant formulated for sealing metal roofing components and common construction substrates. It provides excellent adhesion to materials including brass, steel, aluminum, Kynar, painted surfaces, and Galvalume. This solvent-free, isocyanate-free caulk cures quickly, even at low temperatures, and offers excellent sag resistance for vertical and overhead applications. With strong tensile strength and high elongation, 75 AM is well suited for professional...

The 838 FAST-1 Single Step Elastomeric Roof Coating is a one-component, moisture-cure coating designed to form a seamless, waterproof membrane over roofing substrates. It is formulated for single-step application and cures to a flexible film that allows for movement with the roof surface while maintaining protection from environmental exposure. Key Features Single-component, moisture-cure formulationDesigned for single-step applicationForms a seamless, waterproof membraneFlexible elastomeric...

NovaLink™ FP is a premium, moisture-curing elastomeric sealant and waterproofing solution designed to fill, seal, and level grout lines, voids, seams, and surface damage on construction materials before applying liquid waterproofing. It can also be used to repair roof leaks, asphalt shingles, roof valleys and seams, chimney flashings, and for emergency roof repairs.

DuraGlaze Plus/ DuraGlaze Tint Base is a high-quality, extremely elastic, high-performance, moisture-cure sealant ideal for fenestrations, perimeter sealing (windows, doors, and panels), metal architecture, curtain wall construction, and joints subject to movement. With an extended tack-free time in elevated temperatures, DuraGlaze Plus is perfect for any project. It adheres to difficult-to-bond surfaces and is suitable for use on anodized metal and coatings like Kynar 500® PVDF. Its unique...

DuraGlaze Plus/ DuraGlaze Tint Base is a high-quality, extremely elastic, high-performance, moisture-cure sealant ideal for fenestrations, perimeter sealing (windows, doors, and panels), metal architecture, curtain wall construction, and joints subject to movement. With an extended tack-free time in elevated temperatures, DuraGlaze Plus is perfect for any project. It adheres to difficult-to-bond surfaces and is suitable for use on anodized metal and coatings like Kynar 500® PVDF. Its unique...

E-Curb penetration seals replace old-style metal pitch pans with versatile, precast components and 1-Part polyether pourable sealants. Chem Link E-Curb System can usually be installed in under 15 minutes and never requires flashing or mechanical attachment. E-Curbs are designed for use on granulated modified bitumen, asphalt and coal tar B.U.R. (built up roofing). E-Curbs are specified for PVC, EPDM, PIB, and TPO single ply roofing membranes. E-Curbs are highly versatile for sealing...

GacoFlex H-E-R Sealant is a high-performance elastomeric roof sealant used to seal seams, fasteners, penetrations, and flashing details on commercial roofing systems. Once cured, it forms a flexible, rubber-like seal that accommodates normal roof movement caused by expansion and contraction. The aluminum gray color blends well with metal roofing systems, and the 10.1 oz cartridge format allows for precise application using a standard caulking gun on detail work and smaller repair areas. Key...

ER Systems H-E-R Sealant is a high-performance elastomeric roof sealant formulated for use on commercial roofing systems. It is commonly used to seal seams, fasteners, penetrations, and flashing details where long-term flexibility and durability are required. The 1-gallon can format is commonly used when brushing or troweling material over detail areas, transitions, and repairs where controlled placement is important. Once cured, H-E-R forms a flexible, rubber-like seal that accommodates...

ER Systems H-E-R Sealant is a high-performance elastomeric roof sealant formulated for use on commercial roofing systems. It is commonly used to seal seams, fasteners, penetrations, and flashing details where long-term flexibility and durability are required. The 2.5-gallon pail format is well suited for extended seam work, flashing details, and repair areas where higher volume application by brush or trowel is preferred. Once cured, H-E-R forms a flexible, rubber-like seal that accommodates...

ER Systems H-E-R Sealant is a high-performance elastomeric roof sealant formulated for use on commercial roofing systems. It is commonly used to seal seams, fasteners, penetrations, and flashing details where long-term flexibility and durability are required. The 20 oz sausage format is ideal for controlled application using a sausage gun, making it well suited for seam work, fastener encapsulation, and detailed repair areas. Once cured, H-E-R forms a flexible, rubber-like seal that...

H-E-R Sealant is a high-performance elastomeric roof sealant formulated for use on commercial roofing systems. It is commonly used to seal seams, fasteners, penetrations, and flashing details where long-term flexibility and durability are required. The 5-gallon pail format is intended for larger repair areas, longer seam runs, and projects needing higher material volume applied by brush or trowel. Once cured, H-E-R forms a flexible, rubber-like seal that accommodates normal roof movement and...

A reflective aluminum‑enhanced roof coating—Karnak 27 Fibered Perfectseal forms a metallic shield atop your roof surface, reflecting sunlight to protect underlying asphaltic materials from heat degradation. Infused with reinforcing fibers, it offers steadfast adhesion and thermal resistance, reducing repairs and extending roof lifespan while helping lower building temperatures during hot seasons. Key Features Forms a reflective, self-protecting shield by aluminum flake leafing to the surface...

OB500-15A and OB500-15B are the two drum components of OMG’s OlyBond500 roof insulation adhesive. The Part 1 drum (OB500-15A) contains one half of the system, while the Part 2 drum (OB500-15B) completes the system when mixed. When applied, the adhesive rises quickly, curing in 4 to 8 minutes depending on weather, to secure insulation board to deck or cover board in new construction or re-roofing applications. Key Features two-component polyurethane adhesive system (Part 1 & Part 2) fast tack...

The OMG OlyFill™ Dual Tank System is a compact two-component foam sealant kit designed for roofing and construction applications. This portable system includes two pressurized cylinders (Part 1 and Part 2) that combine through a dispensing gun and static mixing tip to produce expanding polyurethane foam for filling gaps, voids, and penetrations. The compact tank configuration allows for easier handling and transport compared to larger bulk systems, making it suitable for service crews, smaller...

OMG OlyFill™ Foam Sealant is a one-component expanding polyurethane foam designed to fill gaps, voids, and penetrations in roofing and construction applications. It expands upon application to help seal irregular openings and provide insulation and air sealing around roof penetrations, curb details, and other transitions. OlyFill is commonly used in commercial roofing environments where controlled expansion and gap filling are required prior to flashing or finishing. Once cured, the foam can...

OMG OlyGlu™ is a canister-applied membrane adhesive designed for bonding TPO and EPDM roofing membranes in commercial roofing systems. The pressurized canister system allows contractors to apply adhesive quickly and evenly using a hose and spray gun applicator, helping improve installation speed and coverage. OlyGlu is commonly used for field membrane adhesion in single-ply roofing assemblies where controlled spray application is preferred over traditional bucket adhesives. The system is...

OMG OlyGlu™ is a canister-applied membrane adhesive designed for bonding TPO and EPDM roofing membranes in commercial roofing systems. The pressurized canister allows contractors to apply adhesive quickly and evenly using a hose and spray gun applicator. The smaller canister format provides a more compact adhesive solution for smaller roofing areas, service work, and repair applications while still delivering consistent spray coverage and membrane bonding performance. Key features: Designed...

RACE High Performance Specialty Sealant and Adhesive, 10 oz., is a high-strength hybrid polymer sealant designed for roofing and general construction applications. It delivers strong initial tack with long-lasting adhesion while remaining flexible after cure. This sealant offers excellent resistance to UV exposure, moisture, and temperature changes, and adheres to most common construction materials. The sealant is paintable once cured. Key features: High-strength hybrid polymer formulaStrong...

Flexible, One Part, Easy to Remove, Elastomeric, Butyl Rubber Sealant. Excellent for resealing and repairing leaks. Benefits: Easy to removeAllows for movement of dissimilar materialsBonds to substrates without primingMinimizes dust pickup Features:  Stays soft and malleableFlexibleExcellent adhesionFast-skinningNon-stainingOne-part Industries:  ConstructionArchitecturalManufacturingRV Repair Substrates: GlassMetalWoodConcreteCementMasonryPlasticsFiberglassRubber material...

High-Quality, Ready to Use, 100% RTV neutral cure silicone sealant with enhanced adhesive qualities, particularily with hard to stick plastics and PVC. Primerless, Non-Corrosive, and UV Stable. Features: Excellent Adhesion 24 Hour Cure 100% RTV Silicone One-part Primerless Low Modulus Benefits: Ideal for exterior trim and siding Adheres to many porous substrates Durable bond to plastics and PVC Low odor Industries: Glazing Construction Manufacturing Automotive Aircraft Substrates: Wood PVC...

One Component RTV, Acetoxy cure silicone sealant and adhesive chemically formulated for high strength adhesion. When fully, this unique VOC compliant formula, offers UV stability and excellent adhesion to form waterproof and airtight bonds. Features and Benefits: High StrengthExcellent WeatherabilityUV StableNon-YellowingVOC CompliantNon-FlammableWaterproofExcellent AdhesionNon-Shrinking Applciations: Sealing & GlazingHVAC/RPlumbingKitchen & BathSanitary SealsPrecast ConcreteAppliance...

Premium, high - temperature, one component RTV acetoxy cure silicone sealant and adhesive. When fully cured, this unique VOC compliant formula offers tenacious adhesion to form waterproof and airtight bonds to materials in high temperature scenarios. Features and Benefits: High Temp PerformanceExcellent WeatherabilityUV StableNon-YellowingVOC CompliantNon-FlammableWaterproofExcellent AdhesionNon-Shrinking Applications: Sealing & GlazingHVAC/RPlumbingRoofingKitchen & BathFurnace/FireplaceFlues...

Water resistant adhesive designed for singly-ply roofing systems. Excellent open time with high tack.FeaturesFlexibleHigh-tackGood open timeMoisture-resistantPaintableInsulatesOne-partBenefits:Allows for movement of dissimilar materialsEnsures weather-tight sealExtended working timeMaintains bond in wet and moist conditionsEasy to match substrateIndustries:ConstructionArchitecturalManufacturingSubstrates:WoodMetalMasonryInsulationsGalvanized FlashingsPainted Materials ...

The OB5001-OB5002 set is the 10-gallon Bag-in-Box version of the OMG OlyBond500 two-component, low-rise polyurethane foam adhesive. It includes 5 gallons each of Part 1 and Part 2 adhesive, designed for use with PaceCart, SpotShot applicators, or compatible dispensing tools. It is formulated for new and re-roof applications, delivering rapid adhesion of insulation boards with excellent wind uplift resistance and ultra-low VOC emissions. Key Features Bag-in-Box packaging: 5 gallons Part 1 + 5...