Write a review!
Lucas #9600 Joint & Termination Sealant is a 100% solids
non-shrinking moisture cure urethane sealant intended for
sealing large joints and roof termination bars. Minimal odor,
contains no solvents and less than 10 grams per liter VOC.
Excellent adhesion to concrete, masonry, EPDM, PVC, wood,
vinyl and most other common building materials.
* Non-Standard colors available. Please view chart for available colors. Call for Pricing and availability*
RM Lucas Color Chart
To use this product cut the tip to the desired size and
puncture the foil seal. Small orifice size and/or an
incompletely punctured seal may cause material to extrude
around the plunger. Surface to be sealed must be clean.
Maximum recommended joint width is 2 inches. Maximum
recommended depth is 1 inch. Use backer rod for deep joints.
Coverage rate is approximately 25 ft per 10 oz. cartridge for a
¼ inch bead.
Lucas #9600 is paintable after 24 hours. Application below
32ºF (0º C) is possible however curing requires free moisture
in the air and will not begin until the temperature is above
Do not take internally. If swallowed, do not induce
vomiting. Keep out of reach of children
Reviews (0) • Write a review!
This product has no reviews yet. Write a review!