OlyBond500 Bag In A Box Part 1 & 2 Set

The OB5001-OB5002 set is the 10-gallon Bag-in-Box version of the OMG OlyBond500 two-component, low-rise polyurethane foam adhesive. It includes 5 gallons each of Part 1 and Part 2 adhesive, designed for use with PaceCart, SpotShot applicators, or compatible dispensing tools. It is formulated for new and re-roof applications, delivering rapid adhesion of insulation boards with excellent wind uplift resistance and ultra-low VOC emissions.

Key Features

• Bag-in-Box packaging: 5 gallons Part 1 + 5 gallons Part 2 (10 gallons total)
• dispenses as semi-liquid beads that rise ¾- to 1-inch above substrate
• chemical cure time approximately 4 to 8 minutes depending on temperature
• compatible with PaceCart, SpotShot, and similar applicators
• low odor, ultra-low VOC, suitable for sensitive jobsite conditions

• item number: OB5001-OB5002
• packaging: 5 gallons Part 1 + 5 gallons Part 2 (10 gallons total)
• density: Part 1 ≈10.32 lb/gal; Part 2 ≈8.54 lb/gal
• VOC content: regular grade ≈11 g/L; winter grade higher
• chemical cure time: 4-8 minutes depending on temperature and weather
• bead rise: approximately ¾-inch to 1-inch above substrate
• application spacing: maximum 12-inches on center for insulation to substrate

• Store adhesive boxes in a dry area at 55-85°F; protect from freezing.
• Choose the correct grade: regular for 40°F and above, winter for colder use.
• Connect Bag-in-Box Part 1 and Part 2 to the dispensing equipment.
• Insert a proper static mix tip and ensure lines are primed.
• Apply adhesive in beads spaced up to 12-inches on center.
• Allow beads to rise before placing insulation boards; walk boards in to ensure contact.
• Let adhesive cure for 4-8 minutes before continuing work.

Q: What does OB5001-OB5002 include?
A: A 10-gallon set made up of 5 gallons Part 1 and 5 gallons Part 2 in Bag-in-Box format.

Q: How fast does the adhesive cure?
A: Approximately 4 to 8 minutes depending on ambient temperature and substrate conditions.

Q: How high does the bead rise after application?
A: About ¾-inch to 1-inch above the substrate.

Q: What temperatures can this adhesive be applied in?
A: Regular grade is suitable for 40°F and above; winter grade is formulated for colder use.

Q: What coverage does this provide?
A: Coverage depends on deck type, bead spacing, and jobsite conditions; reference manufacturer charts for estimates.