• GreenLink A/S - KnuckleHead Green Link Adhesive/Sealant, 12 Pack - GL-A/S
  • GreenLink A/S - KnuckleHead Green Link Adhesive/Sealant, 12 Pack - GL-A/S
  • GreenLink A/S - KnuckleHead Green Link Adhesive/Sealant, 12 Pack - GL-A/S
  • GreenLink A/S - KnuckleHead Green Link Adhesive/Sealant, 12 Pack - GL-A/S
  • GreenLink A/S - KnuckleHead Green Link Adhesive/Sealant, 12 Pack - GL-A/S
New!
Best Price Guaranteed
Price: $119.84
    Item #GL-A/S
    Write a review!
    Quantity:

    Description

    GREEN LINK Adhesive/Sealant is a non-shrinking polyether adhesive/sealant specially formulated to bond the KnuckleHead base to a wide range of roofing membranes including EPDM, PVC, Granulated Modified Bitumen, and TPO (with TPO primer).

    GREEN LINK Adhesive/Sealant is a polyether-based, moisture-cure formula that has been used in the construction industry for many years. It has earned a reputation for high performance, adhering to a wide range of roofing membranes including PVC, EPDM, Mod Bit and TPO (with primer) yielding a strong, long-lasting bond that exhibits excellent weathering characteristics. GREEN LINK Adhesive/Sealant is 100% solids and it cures by contact with moisture—no evaporation of solvents, so there is no shrinkage as with many adhesives that lose as much as 30-40% of their volume once solvents evaporate. GREEN LINK Adhesive/Sealant is entirely safe—no risk of fire, explosion, or toxic exposure to workers or building inhabitants. It meets the requirements of California Regs: CARB, BAAQMD, and SCAQMD. It does not contain cancer-causing chemicals listed in California Proposition 65. The VOC content is less than 25 per grams per liter.

    • Moisture cure
    • 100% solids — Will not shrink
    • Applies down to 32° F.
    • Environmentally safe.
    • No toxic risk to contractors or building occupants
    • Polyether Structural Adhesive/Sealant
    • Solvent-free, isocyanate-free, low-VOC content, odorless, non-flammable
    • Excellent weathering characteristics — remains elastomeric over many years
    • Bond strength – 275 psi
    • Adheres to common roof substrates and to KnuckleHeads
    • Plastic, waterproof cartridge


    GREEN LINK Adhesive/Sealant squeezed out of the base holes functions as “rivets,” which serve to attract moisture, speeding up the curing process. Also, when fully concealed mechanical fasteners are used to mechanically attach the Universal Base, GREEN LINK Adhesive/Sealant can be applied to the fastener heads to form a waterproof seal. It is so effective in this regard it can be used for emergency repairs where it can be applied directly in ponding water to seal a roof leak instantly.

    Storage and Handling

    GREEN LINK ADHESIVE/SEALANT has a 12-month shelf life from the date of manufacture when stored at 70° F (21° C) and 50% relative humidity. Store original, unopened containers in a cool, dry area. Protect unopened containers from water, heat and direct sunlight. High temperature and high relative humidity may significantly reduce shelf life.

    SDS

    Videos

    Reviews (0) • Write a review!

    This product has no reviews yet. Write a review!

    Related Items
    New!
    GreenLink A-2001-PAD - KnuckleHead Pad, Yellow
    slip resistant KnucklePads reduce movement and protect the roof membrane.
    Price: $9.60
    Availability: In Stock
    Usually ships within 1-2 Business Days

      KnucklePads are used to protect the roof membrane and minimize the effects of vibration. These accessories are molded from tough urethane polymers with a special “safety yellow” tint.Features:Safety Yellow Tint9 Holes allows the sealant to adhere the Knucklehead and roof membrane, giving a stronger hold/grip.Fits all KnuckleHead Pipe Support

      New!
      Greenlnk 2007-EA - KnuckleHead Strut Support System
      Strut Supports are designed for a wide variety of applications including air conditioning units, solar panels, oversized pipes and other HVAC equipment that is to be installed on commercial roofs
      Price: $13.95
      Availability: In Stock
      Usually ships within 1-2 Business Days

        Strut KnuckleHeads are engineered to accommodate steel or aluminum channel which can be configured to support all types of HVAC equipment such as air conditioning units and multiple conduit lines, or for installing solar arrays at proper angles.Strut Supports are designed for a wide variety of applications including air conditioning units, solar panels, oversized pipes and other HVAC equipment that is to be installed on commercial roofs. Strut Supports are designed to accommodate standard...

        New!
        GreenLink 2006-EA-CAP - KnuckleHead Lite Pipe Support...
        Lite Pipe KnuckleHeads are engineered to support a single 1” pipe or two 1/2” pipes for such applications as electrical conduit and condensation pipes.
        Price: $13.75
        Availability: In Stock
        Usually ships within 1-2 Business Days

          Lite Pipe KnuckleHeads are engineered to support a single 1” pipe or two 1⁄2” pipes for such applications as electrical conduit and condensation pipes.KnuckleHead Lite Pipe Supports are designed for a wide variety of roof applications including PVC, condensation pipes, electrical conduit and other types of lines. The KnuckleHead Lite Pipe System can support a single 1.315-inch outside diameter pipe or two 0.840-inch outside diameter pipes. Each KnuckleHead can support up to 600 lbs. Units can...

          New!
          GreenLink 2011-EA-STRAP - KnuckleHead Heavy Pipe Support...
          Heavy Pipe Knuckleheads are engineered to support large pipes up to 3” in diameter for such applications as natural gas and water pipelines.
          Price: $14.60
          Availability: In Stock
          Usually ships within 1-2 Business Days

            Heavy Pipe Knuckleheads are engineered to support large pipes up to 3” in diameter for such applications as natural gas and water pipelines.KnuckleHead Heavy Pipe Supports are designed for a wide variety of roof support applications including natural gas and water pipelines, and other types of pipes up to 2.5” nominal pipe size. Each KnuckleHead can support up to 600 lbs. Units can be spaced to evenly distribute the load of the heaviest equipment. Heavy Pipe supports are lightweight, so they...

            Leave a message