Fall Protection

A rugged, 72-inch anchor strap that creates a quick, reliable tie-off around beams, posts, and truss chords. The slotted D-ring end lets you choke the strap tight so it stays put; the opposite end provides a compact D-ring connection point for your lanyard or SRL. Built from heavy-duty 2-inch polyester webbing with forged steel hardware, it’s tough enough for daily use yet flexible for fast installs and easy stowage. Features 72 in overall length and 2 in webbing width for versatile wraps...

This double-leg lanyard is designed for full 100% tie-off, featuring heavy-duty jacketed double-layer polyester webbing to resist abrasion in tie-back applications. It includes an internal energy absorber housed in a ViewPack cover with inspection window and WrapPack label protection. The wrap-around anchorage connection eliminates the need for a separate anchor point, simplifying setup while maintaining compliance. Steel snap hooks attach to the harness while 5,000 lb gate strength carabiners...

The RCCS-36 RaptorRail Parapet Clamp Crate provides a bulk set of guardrail clamps for building temporary, non-penetrating rooftop guardrail runs. It includes 36 RB-01-RC-CF-000 clamps packaged in a single crate for organized transport and storage. Designed for use with the RaptorRail system, each clamp secures posts and rails to parapet walls for OSHA-compliant perimeter protection. Key Features Includes 36 RaptorRail parapet clamps for large layouts Non-penetrating clamp design for rooftop...

After many requests, Super Anchor developed a twin lanyard that allows workers to use the side D-rings on their harnesses for work positioning. This lanyard is specified for use as a Fall Restraint or Work Positioning device only. Do not use for Fall Arrest, vertical suspension, window-washing or rescue. We offer 6 different models all made with 3/16” wire rope, steel thimbles and connector “O” ring. All unites are hand-made in our factory in Monroe WA using state of the art swaging equipment....

This leading-edge self-retracting lifeline is designed for edges and below-D-ring anchorage scenarios. It features a 7/32″ galvanized steel cable lifeline and an internal inertial braking system with dual disc brakes. The device includes an external ViewPack® energy absorber for deceleration and an aluminum housing for durability. With a 60-ft reach and robust connectors, it supports Class 2 performance for demanding job-site conditions. Key features: 7/32″ galvanized steel cable lifeline for...

Built for tight, tidy connections, this 18-inch single-leg web lanyard keeps hardware close to the harness and helps reduce slack where space is limited. A double-locking snaphook delivers fast, secure clip-ins to rated D-rings, while the sewn loop end lets you girth-hitch compatible anchor straps or connect with a rated carabiner. Durable webbing, rugged stitching, and clear labeling make inspections quick so crews can move safely and efficiently. Features 18 in working length for compact...

The RPCC-12 RaptorRescue Pole Attachment ONLY is an accessory component from Leading Edge Safety designed to work with the Raptor Rescue Retrieval System. It is a telescoping rescue pole that extends from 6 to 12 feet, enabling a worker to reach a fallen individual’s harness connection point safely. The pole uses a wooden shaft and zinc plated alloy steel hardware, weighs 4.2 pounds, and supports effective emergency rescue operations without the full winch system. Key Features Telescoping...

The Guardian Fall Protection Vinyl-Coated Galvanized Choker Anchor – 6 ft. (10452) provides a versatile and reusable anchorage solution for fall protection systems. Constructed from galvanized steel cable with a protective vinyl coating, this choker-style anchor strap is designed to withstand tough jobsite environments while protecting structures from damage. The 6-foot length allows flexible placement around steel beams, pipes, and other secure anchorage points. Easy to install, remove, and...

The Guardian Fall Protection 10717 Concrete Anchor Strap provides a safe and dependable anchorage solution for use with concrete formwork and rebar structures. At 6 feet in length, it offers extended reach compared to shorter straps, increasing flexibility in tie-off positioning. Built from high-strength polyester webbing with reinforced stitching, this strap features a loop on one end and a steel D-ring on the other to ensure secure tie-off points. Lightweight, portable, and reusable for...

The Super Anchor 4015 and 4015-V are prussic-style rope grabs designed for use with 5/8 inch vertical lifelines. Both models lock bi-directionally when loaded, providing secure fall arrest and restraint capability. The 4015 features a deluxe build for extended service, while the 4015-V offers a simplified value version for cost-effective applications. Features Prussic-style rope grab for 5/8 inch vertical lifelines Bi-directional locking for fall arrest Compatible with Super Anchor lifelines...

The SafeWaze FS595 PRO 6′ Stretch Internal Energy Absorbing Lanyard is designed to minimize trip hazards while enhancing mobility on site. It stretches from 4 ft (stowed) to 6 ft (extended) and features elasticized tubular webbing with an internal energy absorber—no external shock pack—making it lightweight and low profile. One end connects via a forged steel snap hook (to the harness), and the other features a forged steel rebar hook for secure anchorage. ...

The SafeWaze Latitude Pro Leading‑Edge 11′ Dual‑Leg SRL‑P LE is engineered for leading-edge fall protection environments. Featuring 11 ft of ultrahigh molecular weight webbing (dual-leg style) and a translucent housing for internal inspections, it includes a sealed centrifugal braking system that requires no external shock pack. Equipped with a steel swivel carabiner anchored to a dedicated leading-edge bracket, it supports continuous dual‑leg tie‑off. Available connector options include steel...

The FallTech 727620LE Contractor Leading Edge SRL is designed for use on unprotected sides and edges. It features a 20-foot 7/32-inch galvanized steel cable lifeline for added cut resistance, an internal inertial braking system, and an external ViewPack® energy absorber for enhanced safety at leading edges. The glass-filled nylon housing includes an integrated hand-grip for ease of connection. This device carries a Class 2 SRL rating and meetsANSI Z359.14-2021 and OSHA standards for leading...

The Guardian Fall Protection CR5 Class 1 Dual-Leg Self-Retracting Lifeline is engineered for mobility and continuous fall protection with 100% tie-off capability. Featuring two 6-foot polyester web lifelines, this SRL allows workers to stay securely tied off while moving between anchor points. A lightweight, impact-modified thermoplastic housing and a 360° swivel top provide durability and freedom of movement, while reinforced webbing guides extend service life. Integrated fall clearance...

The FallTech 7446 Removable Concrete Anchor is designed for temporary anchorage in cured concrete walls and ceilings where reuse is required. With a forged O-ring connection point and full 360° swivel orientation, it installs into a pre-drilled hole (minimum 4-1/2″ depth, maximum 1″ diameter) and is assembled with galvanized and stainless-steel components. Suitable for use with horizontal lifeline (HLL) systems, the anchor has a static strength rating of 6,000 lb minimum. Key features: Forged...

This spreader assembly is designed for use in work-positioning by providing dual hook attachment to the user’s hip D-rings. It features an integral captive-pin carabiner for user-supplied positioning hook connection. The plated alloy steel hooks and carabiner are rated for high static strength to support stable, hands-free work positioning at heights. Key features: Dual-gate hook attaches to user’s hip D-rings for work-positioning applications Integral captive-pin carabiner connects to...

The FallTech 770001 Temporary Rope HLL System is a portable horizontal lifeline kit designed for two workers sharing a 100-foot span. The system uses a 5/8-inch low-stretch hollow-core polyester rope with a braided and thimbled end-termination. Included are plated steel hardware such as a line tensioner and two installation carabiners, plus two pass-through anchors and two connecting rings. Ideal for temporary installation, this system supports mobility across a work span while providing a...

The RR-CS-350 Raptor Combo Guardrail System provides 350 feet of OSHA-compliant, non-penetrating perimeter protection. This all-in-one kit includes uprights, fixed rails, adjustable rails, corners, and a job box for organized transport and storage. Engineered by Leading Edge Safety, it adapts to a wide range of roof conditions while ensuring fast installation and reliable fall protection. Key Features Complete 350 ft rooftop guardrail system in one package Includes uprights, fixed rails,...

The Guardian Fall Protection 10710 Concrete Anchor Strap provides a reliable anchorage solution for concrete formwork applications. Measuring 3 feet in length, this durable webbing strap features a loop on one end and a D-ring on the other, offering secure and versatile tie-off points. Designed for temporary anchorage, the 10710 can be easily positioned around rebar or other suitable concrete structures. Its compact, lightweight design makes it portable and convenient for a wide range of...

This self-retracting lifeline is engineered for leading-edge hazard environments. It features a 7/32″ galvanized steel cable lifeline, aluminum housing, load-indicating swivel snap hook, and an internal inertial braking system with dual disc brakes. The unit meets Class 2 leading-edge requirements for applications where the lifeline may pass over or engage sharp edges. Key features: 7/32″ galvanized steel cable lifeline Load-indicating swivel snap hook for fall-event indication Internal...

The Malta Dynamics K1001 Equipment Pro Bag is a heavy-duty, jobsite-ready gear bag built to carry your fall protection equipment, PPE, and tools with ease. Designed for durability and convenience, this rugged duffel features reinforced handles, weather-resistant material, and ample space for harnesses, lanyards, helmets, and more. Whether you're heading to the roof or the field, it keeps your gear organized and protected. keywords: Spacious main compartment holds a full-body harness, lanyard,...

The SafeWaze FrogLink Temporary/Re‑Useable Roof Anchor (019‑4005) is a stainless-steel anchorage point designed for fall arrest and restraint use on wood roofing applications. It features a 360° working radius, a built-in energy absorber, and a formed anchorage loop. This anchor can be used as a single-point fall arrest anchor or integrated into a horizontal lifeline system, ideal for temporary or mobile roof work.

The TB3-6072 series is a full-body, 3 D-ring fall arrester harness built for both fall arrest and restraint use. It features a padded waistbelt, breathable mesh frame, hi-viz polyester webbing, and tongue buckle leg straps with quick-connect chest buckle. Offered in sizes from small to 2X, it supports up to 310 lb (for sizes S–XL) and up to 400 lb for size 2X. Features 3 D-ring configuration: 1 dorsal and 2 side rings for positioning Hi-visibility polyester webbing with padded frame and...

The SafeWaze FS‑185 Pro Harness is a dependable, comfortably padded full‑body harness featuring a no‑tangle dorsal D‑ring and grommet-style leg straps for secure adjustment. It includes ergonomically designed shoulder pads, friction-style torso buckles, pass‑through chest buckle, and lanyard keepers. Built with abrasion‑resistant webbing and quality steel hardware, this harness is ANSI/OSHA certified for fall arrest applications across construction, utility, solar, or industrial environments. ...

The SafetyGator SG-000-09 from Leading Edge Safety is a full-featured mobile fall restraint system designed for steep-slope and residential roofing tasks. It includes a 145-gallon tank that fills with water, eliminating the need for external counterweights, and is rated to support fall restraint for up to six workers. Equipped with six tie-off points and a ridge lifeline guide, it offers reliable safety and mobility with flat-free tires and quick setup. Key Features Water-filled tank holding...

The FallTech DuraTech Mini 6 ft Twin-Leg Personal SRL-P (model 72706TB3) is a compact fall-arrest self-retracting lifeline designed for dual-leg continuous tie-off. It features a long-wearing Dyneema®/polyester blend web lifeline, steel rebar hook anchorage connectors, a steel dorsal connecting carabiner with alignment clip and dual leg configuration. It allows anchorage up to five feet below the dorsal D-ring without edge hazard for users weighing up to 310 lb maximum. The device meets...

The Guardian CR5 Class 1 Web Self-Retracting Lifeline (SRL) is a robust, lightweight fall arrest device engineered for both fall arrest and travel restraint. Built with an impact-modified thermoplastic housing, radar-strong lifeline guidance, and a 360° swivel top to reduce snags, the CR5 enhances on-the-job mobility and safety. It offers multiple hook options — steel or aluminum, snap or rebar — to suit varied anchorage needs. Integrated fall clearance charts on the shock pack, digitally...

The Ultra‑Safe Red Dragon RD‑HN50‑SRL is a heavy‑duty, 50‑foot Class 2 galvanized steel cable self‑retracting lifeline engineered for extreme-reaching fall protection needs. Built to ANSI Z359.14‑2021 standards, it features impact-resistant housing, a speed‑sensitive braking system, and load-indicating connectors. Ideal for construction, high‑rise maintenance, utility, and industrial work, it delivers smooth retractability and robust fall protection over extended reach while minimizing slack...

The Guardian Fall Protection 21056 Cyclone Reflective Harness (Size S) is a high-visibility full body harness designed for enhanced safety in low-light environments. Built with durable polyester webbing and reflective stitching, it combines comfort, adjustability, and visibility for workers on construction sites, roadwork projects, and industrial applications. The Cyclone design includes multiple points of adjustment, quick-connect buckles, and a dorsal D-ring for fall arrest, ensuring both...

The FallTech 7451AC Rotating D-Ring Anchor, Without Fasteners, provides a high-quality anchorage option for steel or cured concrete installations where user-supplied fasteners are used. It features a stainless-steel anchoring plate, a plated alloy-steel connecting D-ring with full 360° rotation via a precision-cut bushing, and is designed for both temporary and permanent installation. The anchor plate and D-ring assembly are reusable to support multiple onsite setups. Key features:...

The Guardian Fall Protection 10715 Concrete Anchor Strap is a versatile and reliable anchorage connector designed for use with concrete formwork and rebar applications. At 4 feet long, this durable webbing strap includes a loop on one end and a steel D-ring on the other, offering a secure tie-off point for fall protection systems. Built from high-strength polyester webbing, the 10715 is lightweight, portable, and reusable for temporary applications. It is OSHA and ANSI compliant, ensuring...

This belted full body harness is built for demanding job site applications, featuring plated alloy steel hardware, a padded shoulder yoke, hip-to-seat leg pads, and a 6-inch waist support positioning pad. It includes dorsal and hip D-rings as well as a quick-connect chest buckle and tongue-buckle leg closures with nine grommeted adjustment positions to ensure a secure fit in large body sizes. The harness also supports the addition of personal self-retracting lifelines (SRLs) via a proprietary...

The Guardian Fall Protection 00360 D-Ring 2-Hole Anchor Plate is a compact and durable anchorage connector designed for fall protection systems. With a simple two-hole mounting design, it provides a secure attachment point for personal fall arrest equipment on wood, metal, or concrete structures. Constructed from high-strength steel, this anchor plate ensures reliability and long-term performance in demanding environments. Lightweight and easy to install, the Guardian 00360 is suitable for...

The FallTech CTX cable Class 2 leading edge personal SRL-P series provides compact, ergonomic fall protection for edge-exposed applications. Each 8 ft single-leg unit uses a 3/16 inch galvanized steel cable lifeline, engineered for Class 2 leading edge performance and below D-ring tie-off up to five feet. An energy absorber cover includes fall clearance charts and tables, while the internal mechanism is designed to minimize unintentional lockups and keep workers moving productively. All models...

The Super Anchor 605x-D series Value Tie-Off Straps are temporary anchorage connectors designed for quick installation during construction. Each strap cinches around structural members such as beams, headers, or rafters and provides a secure D-ring connection point. With 2-inch webbing rated at 5,000 lb and available in lengths of 48, 60, and 72 inches, these straps deliver OSHA and ANSI compliant fall protection for a single worker. Features Temporary cinch-style tie-off strap with D-ring end...

The Guardian Fall Protection 21058 Cyclone Reflective Harness (Size XL) is a premium full body harness designed for comfort, durability, and high visibility. Constructed from heavy-duty polyester webbing with reflective stitching, it enhances worker safety in low-light or high-traffic conditions. The harness includes ergonomic padding, multiple adjustment points, quick-connect chest and leg buckles, and a dorsal D-ring for secure fall arrest attachment. Ideal for construction, roadwork, and...

The SafeWaze Latitude Pro 7′ Single Web SRL‑P delivers overhead Class I fall protection tailored for arc flash, welding, and high-heat environments. It includes 7 ft of Kevlar® flame-resistant webbing, sealed in a clear resin housing for internal inspection, and features a centrifugal braking system that doesn’t require external shock packs. Equipped with a 9013 behind‑the‑web bracket and swivel‑top carabiner, these units offer superior usability and safety. Available in four connector...

The RB-03-310-11 Raptor Wood Railing Slider Bracket from Leading Edge Safety is an accessory designed to be used with the Raptor All-In-One Guardrail Base. It provides the functionality to securely mount wood railing members to the guardrail system base by allowing a sliding adjustment for alignment. This component enhances flexibility when integrating wood rails, helping maintain safety, structural integrity, and code compliance on job sites. Key Features Allows attachment of wood rails to...

The Guardian Fall Protection Beamer 2000 Fall Arrest Anchor (00103) is a reusable beam anchor engineered for secure fall arrest tie-off on structural I-beams. It adjusts to fit flange widths from 6 to 16 inches and flange thicknesses from 0.5 to 1.25 inches, making it ideal for a wide variety of steel erection, welding, and construction applications. Built from aluminum, steel, and nylon components, the Beamer 2000 installs quickly, travels smoothly along beams, and can be repositioned without...

The Guardian Fall Protection 11901 Tiger Tail single-Leg Stretch Lanyard is engineered to provide 100% tie-off capability while reducing trip and snag hazards. Its stretchable design extends from 4½ ft to 6 ft, retracting when not under tension to minimize slack. An integrated shock absorber ensures that fall arrest forces remain under 900 lb. The twin-leg configuration allows workers to stay tied off at all times while transitioning between anchor points. Built with heavy-duty polyester/nylon...

The EU-112-18-P Safety Bull Counterweight is a robust add-on designed to provide essential ballast for Safety Bull mobile fall protection systems when used on concrete or asphalt surfaces. Each individual counterweight plate weighs approximately 30 pounds and is constructed of mild carbon steel to ensure durability under demanding site conditions. For full compliance and safe operation, a complete Safety Bull unit requires eleven of these counterweights, ensuring the cart remains stable and...

The SafeWaze FS590 PRO 6′ Stretch Internal Energy Absorbing Lanyard features lightweight, high-visibility elasticized webbing that extends from 4 to 6 feet for greater maneuverability and reduced trip hazards. The internal shock absorber eliminates the need for an external pack, delivering smoother arrest forces and greater comfort for the user. It is equipped with double-locking forged steel snap hooks on both ends and is ANSI Z359.13 and OSHA compliant. ...

The FallTech FT-Iron 3D Construction Belted Full Body Harness (model 8144) is designed for rugged construction and overhead fall arrest use. It features a comfortable and tool-ready waist belt to distribute load, ergonomic lateral leg strap construction to improve mobility, a reinforced sub-pelvic strap with wear pad for durability, and a durable dorsal D-ring plate to minimise slippage under load. The tongue-buckle leg adjustments offer a broad range of fit options and the harness complies...

The EU-1000-18-P Safety Bull Job Box from Leading Edge Safety delivers secure and durable tool storage designed for use on rooftops and elevated jobsites. It features a 4.5 cubic foot face opening, a locking T-handle latch, and powder-coated mild steel construction. Compatible with all Safety Bull mobile fall protection models, it provides both security and convenience while weighing just 63 pounds. Key Features 4.5 cubic foot face opening for easy access Locking T-handle latch for added...

Built for everyday tie-offs, this 72-inch single-leg web lanyard pairs durable, high-tenacity webbing with a 5005-Z double-locking snaphook for fast, secure connections. The sewn loop end adds versatility for girth-hitching compatible anchor straps or connecting with a rated carabiner. Clear labeling and rugged stitching make inspections straightforward, keeping crews moving safely and efficiently. Key features 72 in (6 ft) working length to reach common anchor points while minimizing slack....

The Guardian Fall Protection CR3-EDGE Class 2 Double-Leg Self-Retracting Lifeline is built for leading-edge work environments requiring continuous tie-off safety. Featuring dual 8 ft galvanized steel cables, this SRL allows workers to remain connected while transitioning between anchor points for 100% tie-off. Its durable impact-resistant housing and integrated energy absorber provide safety in foot-level tie-off and sharp edge conditions. The swivel top connector prevents twisting, and...

The SafeWaze FS902 Concrete Anchor (3K) is a reusable fall arrest anchor designed for temporary use on concrete surfaces. This compact device holds securely via a tensioning mechanism and provides a horizontal or overhead D‑ring connection point with a 5,000 lb minimum breaking strength. Built for easy deployment and removal, it supports single-user applications in construction, maintenance, or confined space setups.

The FallTech 7408 Toggle-Through Eyebolt Anchor for Steel is constructed for temporary and reusable anchorage on steel structures. It installs into hole sizes ranging from 13/16″ minimum up to 1-1/4″ and on steel substrate thickness up to 1-1/4″. It is designed for use where quick relocation of anchor points is required, particularly in steel construction or rigging setups. Key features: Installs on steel substrate up to 1-1/4″ thick and hole sizes from 13/16″ to 1-1/4″ Designed for fast...