• AES Raptor TriRex Mobile Fall Protection System w/20 cu. ft. Job Box - AES-TR-000-1-09
  • AES Raptor TriRex Mobile Fall Protection System w/20 cu. ft. Job Box - AES-TR-000-1-09
  • AES Raptor TriRex Mobile Fall Protection System w/20 cu. ft. Job Box - AES-TR-000-1-09
Ships Free!

FREE SHIPPING to commercial address!

Additional delivery fees apply to non-commercial addresses and/or locations without a loading dock and/or fork lift.

Normally ships within 1-2 business days.

Best Price Guaranteed
Retail: $4,752.00
    Item #AES-TR-000-1-09
    Write a review!
    Quantity:

    Overview

    Fall Arrest rating for three workers and Fall Restraint for two. For Concrete applications, only 2 Workers for Fall Arrest and 2 for Fall Restraint. With the new job box and material rack, you will see safe and productive increases for your leading edge work. Includes Flat-Free Tires, 20 cf Job Box (w/double door opening from the center) and a Material Rack. Additional 12 cf job box and Raptor Alert available as an option.

    The TriRex was redesigned in 2011 from the ground up, based on customer feedback, features new safety innovations in order to offer the safest, most reliable, and easiest-to-use mobile fall protection unit on the market. Some of the high-lights:

  • Streamlined frame, removing any protrusions that might create tripping hazards
  • Enlarged front attachment plate to accommodate larger, different sized equipment
  • Open lifting hooks have been removed and replaced with closed guide-loops underneath the frame for lifting or securing during transportation
  • Fork pockets added so the TriRex can be easily moved and loaded without risking damage

    Features :
  • OSHA Compliant
  • No Assembly Required
  • No Counterweights
  • No Loose Parts
  • Useful On Every Job Site
  • NEW: Positive-locking wheel locks
  • NEW: Positive-locking front axle
  • NEW: Ratchet engagement arm lock - Automatically secures engagement arm to ensure unit will not disengage during a fall or rescue!
  • NEW: Streamlined frame
  • NEW: Convenient lifting fork-pockets
  • Standard Flat-Free Tires
  • Specifications

    Length: 74" (without handle attached), 113.5" (with handle attached)
    Width: 56.5"
    Height: 51"
    Weight: 965 Pounds (Base Model)
    Tires: Solid Polyurethane 18 x 8.5 x 8 flat free tires, needle bearings with grease zirks
    Size of Platform: 23 3/4 x 29 3/4"
    Height of Platform from Ground: 21-3/4"
    Ground Clearance: 5-1/2"
    Warranty: Manufacturers limited warranty covers any defect in workmanship or materials; One year from date of purchase
    Standard Job Box Dimensions: 47 1/2" wide x 24" tall x 24" deep
    Capacity: 20 cubic feet
    Weight: 116 pounds
    Description: 16 gauge solid steel construction, powder coated inside and out Weight Carry Capacity of Trailer: 2000 lbs gross weight rating
    Fall Protection Standards: 1926.502 (D)
    Fall Arrest Anchor Fall Arrest Capacity: Three Workers

    Approved Surfaces

    Tested and approved for the following Substrates:
    Built-Up Roofing (BUR) Membrane
    Modified PVC Membranes
    Thermoplastic Polyolefin (TPO) Membranes
    EPDM Roofing Membranes
    Modified Bitumen Membranes
    Ballasted EPDM Membrane
    Metal Deck (20 ga. And 22 ga. ONLY)
    Dens Deck
    Hardboard
    Plywood
    Lightweight Concrete
    Gypsum Deck
    Polyisocyanurate (ISO)
    Expanded Polystyrene (EPS)

    Topsoil, grade, compact dirt, at ground level

    Flat Surfaces to .5:12 (can be used on slopes .5:12 to 1:12 when using the optional braking system)

    DO NOT USE ON THE FOLLOWING SUBSTRATES:
    Ice
    Snow
    Tectum Deck
    Metal Deck less than 22ga. or over 20ga.
    (Structural Deck)
    Loose laid material not part of a complete finished system

    ** BEFORE HOISTING TO ANY ROOF SURFACE** THE CONTRACTOR MUST VERIFY THAT THE DECK ASSEMBLY CAN ACCOMMODATE THE LIVE LOAD THE RAPTOR R1000.

    FAQ

    WHERE ARE THE COUNTERWEIGHTS/WATER TANKS?
    The TriRex has no counterweights to add or water tanks to fill. The solid steel frame members, along with the leverage of the safety engagement arm, eliminates the need for cumbersome counterweights or water tanks.

    HOW DOES IT WORK?
    If a fall were to occur, the TriRex’s Patent-Pending Roof Safety Engagement Device penetrates the roof, creating a secure anchor point to restrain or arrest the fall.

    HOW MANY MEN CAN ATTACH TO THE TRIREX
    ?
    Three.* The TriRex is rated for three men for fall arrest. *With the optional Fall Restraint Tie-Off Rings an additional two men can be attached to the TriRex.

    WHAT’S THE DIFFERENCE BETWEEN FALL ARREST AND FALL RESTRAINT
    ?
    Fall arrest is the stopping of a fall in progress. Fall restraint is to stop before it occurs.

    IS THE TRIREX OSHA APPROVED?
    OSHA no longer offers an approved status to products. OSHA regulations and standards are established as the criteria to be met in the design of products. The TriRex is manufactured to comply with OSHA Regulation 1926.502(d) for fall arrest anchors.

    WHERE DO I HOOK UP TO ON THE TRIREX?
    Three rings that are welded to a green plate located in the center on one side of the TriRex. These three green rings are the tie off points. The four yellow lifting hooks located on each corner of the TriRex are for hoisting purposes only.

    ARE THERE ANY PARTS THAT NEED TO BE REPLACED OR RE-CERTIFIED IF THERE IS AN ACTIVATION OF THE SYSTEM?
    No. If the activation is strong enough, the engagement claw may stick in the substrate. Dislodge the claw from the substrate and the engagement arm will return to its ready position. A competent individual should inspect the unit for any damage and to insure that the engagement arm moves in anuninhibited manner. The TriRex may be repositioned and used again.

    CAN THE BASE MODEL TRIREX BE USED WITHOUT THE LARGE JOB BOX?
    No. The large job box is an integral part of the TriRex and is bolted to the frame.

    WHAT TYPE OF TIRES ARE INSTALLED ON THE TRIREX?
    All TriRex’s now come standard with Solid Polyurethane Tires.

    WHAT DOES THE TRIREX WEIGH
    ?
    The empty weight of the base model TriRex with solid tires is 965 pounds. Each AES TriRex has a sticker inside the lid of the rear job box which provides the empty weight of the models.

    CAN I INSTALL MY OWN EQUIPMENT ON THE TRIREX?
    Yes. AES Raptor offers an optional 12 cubic foot job box but the base model is sold without any optional equipment, giving the owner the opportunity to install their own equipment.

    CAN THE ENGAGEMENT SYSTEM BE INSTALLED ON THE ROOFING CARTS I ALREADY OWN?
    No. The AES TriRex is specifically designed and tested to operate in combination with the Roof Safety Engagement Device. A fabricated roofing cart would not comply with OSHA regulations without proper testing and certification, thus subjecting the workers and owners to potential hazards and fines.

    Video & Docs

    Reviews (0) • Write a review!

    This product has no reviews yet. Write a review!

    Related Items
    Ships Free!
    AES Raptor SRL-Tray for Mobile Fall Protection Carts
    Positions SRL's properly, prevents damage to SRL's and to roof membrane
    Price: $371.25
    Availability: In Stock
    Usually ships within 1-2 Business Days

      Mobile Fall Protection Systems are a great solution when there’s no place for workers to tie-off for fall protection! However, the mounting and positioning of self-retracting lifelines (SRL’s) on mobile fall protection carts is problematic. Problem #1: Currently, SRL’s are NOT being positioned according to manufacturer guidelines on mobile fall protection carts! According to DBI/Sala’s guidelines for SRL use in horizontal or near horizontal applications, “The SRL should be positioned on it’s...

      Ships Free!
      AES Raptor Stinger Mobile Fall Protection Unit
      With 16" x 6.5" x 8" Flat Free Tires
      Price: $2,623.50
      Availability: In Stock
      Usually ships within 1-2 Business Days

        AES Raptor Stinger Mobile Fall Protection Cart with 16" x 6.5" x 8" Flat Free Tires Compact and Transportable. Can be easily loaded into the back of a pick-up and will fit into elevators and through doorways. With its unique design, the weights can be removed, easily reducing the overall weight of the main unit and allowing two workers to take it up stairs, through penthouses, and adapt to a variety of demanding, leading edge, fall issues.Allows one worker to be tied for fall arrest and one...

        Ships Free!
        New!
        Malta Dynamics X1240 The Grabber Mobile Fall Protection...
        Provides two overhead anchor points – anytime, anywhere
        Price: $33,995.00
        Availability: In Stock
        Usually ships within 1-2 Business Days

          X1240 The Grabber® Mobile Fall Protection System provides two overhead anchor points – anytime, anywhere. The Grabber® meets OSHA fall protection codes and ANSI Z359.6 design requirements for fall arrest systems, and has been validated by an independent 3rd party ISO 17025 testing laboratory. The versatile Grabber® is designed to be used in either fall arrest or fall restraint and features a one-of-a kind adjustable mast that can be positioned anywhere between 2’ and the unprecedented maximum...