Best Price Guaranteed
Price: $335.95
    Item #GUA-00657
    Write a review!
    Quantity:

    Overview

    The Guardian Fall Protection CB Anchor Series are perhaps the most proven fall protection anchors on the market. CB Anchors are compatible for installation onto wood, steel, and concrete substrates (fasteners are included for wood and steel applications). The anchor post functions to extend though roofing so that it is accessible both during and after roof construction, and is compatible for use with SRLs, vertical lifelines, horizontal lifelines, and shock absorbing lanyards. CB Anchors are composed of durable, galvanized steel, and are an excellent choice for nearly any fall protection application.

    Features:


    • Easy to install
    • Compatible with horizontal lifelines
    • Install onto wood, metal, or concrete
    • Extends though roofing so it’s accessible both during and after construction
    • Intended for permanent locations
    • Compatible with horizontal lifelines
    • Compatible for installations onto wood, steel, and concrete substrates

    Specs:


    STANDARDS:

    OSHA 1926 Subpart M & 1910
    ANSI Z359.18 -17 & A10.32 -12
    Type A Anchorage Connector

    MATERIALS:

    Galvanized Steel

    WORKER CAPACITY:

    130 - 420 lbs.

    PERFORMANCE:

    • Maximum Users: 1
    • 5,000 lb. MBS (Minimum Breaking Strength)

    NOTES:

    • Minimum service temperature: -30°F
    • Suitable for use in combination with HLL Systems

    Applicable Standards: OSHA 1910, OSHA 1926 Subpart M, ANSI Z359.18-17* see instructions, and ANSI A10.32-12.
    Worker Capacity Range: 130-420 lbs.
    Material: Galvanized steel
    Min. Breaking Strength: 5,000 lbs.

    FAQ

    Q. What if I don't meet the decking/substrate requirements of a ¾" CDX plywood or 20 ga. metal?
    A. There are a variety of different methods. You can use 2x4 bracing for wood applications or you can lay a 4x4 sheet of wood or decking down over the top of the area where anchor points are going to be installed.

    Q. Why?
    A. Anything less than the above substrates will not hold 5,000 lbs. which is the requirement for attachment areas. By using 2x4 bracing or another sheet of material, screwed securely into the framing members (truss or purlins), you are, in essence, making that section of decking capable of meeting the 5,000 lb. requirement.

    Q. What is the proper spacing if I want to run the 4 worker horizontal line system?
    A. CB: 12's thru 18's: 20ft. on center SKYHOOKS: 16ft. on center

    Q. How many workers does the horizontal cable system hold?
    A. 4 in. FALL RESTRAINT per continuous run of cable; 1 in FALL ARREST per continuous run of cable

    Q. How do I attach the cable system to the anchors? Do I attach to each one?
    A. Terminate the cable on one end by running approx. 2 feet through the anchor and clamping it back to the remaining cable with at least 3 cable clamps. For Skyhooks, run the cable through the large hole, then through the small hole, and back through the large hole. * Run the end of the cable line through each intermediate anchor (for Skyhook, run only through the large diameter hole) * Do not stretch the cable tight! Allow 6 to 8" extra line per 20ft. to allow for slack * When selling the line, also add the 2 feet and the slack * The slack absorbs some of the impact in a fall

    Q. Can I install a CB-1-B on a flat roof?
    A. No. Because it is a flat anchor with no upright it cannot be installed in any waterproof manner. It is intended for vertical structures.

    Q. Can I install a CB-1-W for a permanent application?
    A. ONLY if it is installed as recommended and then given some sort of weatherproofing finish. The current unit does not have any weather protection and will rust when exposed.

    Reviews (0) • Write a review!

    This product has no reviews yet. Write a review!

    Related Items
    Guardian 21066 Cyclone Construction Harness - XL
    Pass Through Chest Buckle, Tongue Buckle Leg Straps & Waist
    Price: $207.45
    Availability: In Stock
    Usually ships within 1-2 Business Days

      The Cyclone Harness offers superior comfort, styling, and safety. Our design engineers took the basics of what makes a harness effective and safe, and made holistic improvements to allow workers to do their jobs more comfortably and with added versatility, all without breaking the bank. They Cyclone features ultra-flow padding that helps keep moisture away from the body, and the double-grommeted tool belt provides the ultimate in support. A variety of buckle configurations are also available....

      Guardian 00654 CB-18 Roof Anchor with Premium Swivel Top
      For use on Wood or Metal
      Price: $547.55
      Availability: In Stock
      Usually ships within 1-2 Business Days

        The Guardian Fall Protection CB Anchor Series are perhaps the most proven fall protection anchors on the market. CB Anchors are compatible for installation onto wood and steel (fasteners are included). The anchor post functions to extend though roofing so that it is accessible both during and after roof construction, and is compatible for use with SRLs, vertical lifelines, horizontal lifelines, and shock absorbing lanyards. CB Anchors are composed of durable, galvanized steel, and are an...

        Guardian 00680 CB Swivel Top System
        Mounts on top of CB-12 or CB-18 for Retractables
        Price: $535.64
        Availability: In Stock
        Usually ships within 1-2 Business Days

          This SRL cradle installs to any Guardian Fall Protection CB post anchor. Accommodates most SRLs up to 50' in length, or up to 65' if used with additional extension attachment. Features: Mounts on top of the CB-12 or CB-18 for retractable Easy installation Swivels 360º Removable and reusable bolt application Cost effective accessory to the CB Does not include CB anchor Please read and understand the manufacturer instructions before using this product.  ...

          Leave a message