Specials

The Josam 21504 Poly Dome is manufactured from durable black polypropylene and fits the Josam 21500-series roof drains. It features a 13-inch outside diameter and a height of 4½ inches. This component helps prevent debris entry while maintaining full drainage capacity. Key Features Material: polypropylene Outside diameter: 13 inches Height: 4½ inches Color: black Designed to fit Josam 21500-series large sump roof drains ...

The RACE Safety Orange Skylight Net fits over raised-lip skylights or hatch openings with a minimum 2″ vertical lip surface. It is designed to contain a 1,000 lb load. The net is made from safety orange 1-1/2″ high tenacity polypropylene (HTPP) using a 4″ square mesh and reinforced with sewn rope borders. The net includes a 1-1/2″ green web strap with an attached ratchet for securing around the skylight frame. Key features: Fits skylights or hatches with at least 2″ vertical lip Contains a...

The OMG Hercules Aluminum RetroDrains (SKUs HDAL3A, HDAL4A, HDAL5A, HDAL6A) are durable retrofit roof drains designed to replace existing drains in re-roofing projects without removing the existing drain fixture. Each drain features a one-piece spun aluminum body, heavy cast aluminum strainer dome, large flange for secure membrane attachment, and a U-Flow mechanical watertight seal that connects reliably to existing plumbing (PVC or cast iron). These drains meet multiple codes and standards...

The RACE 4-Wheel Roof Cart is built to carry heavy loads of material, insulation, or equipment across job sites. It features a 30″ × 60″ bed frame capable of supporting up to 2,000 pounds. The design includes a dead-man safety brake which engages if the handle is released. Key features: 30″ × 60″ bed frame for ample cargo space 2,000 lb load capacity Dead-man brake that activates when handle is dropped Stake and pin pockets and open back frame for hoist access Front pin hitch and rear hitch...

DeWitt’s 911 Emergency Roof Patch is a contractor-grade powder formulated to provide a temporary, leak-proof seal on flat roofs during emergency conditions. The natural mineral compound expands to a gel on contact with water, helping stop leaks on built-up roofs quickly — even in inclement weather or standing water. This product can be applied directly from the pail over suspected leak areas without special tools, and it continues to seal as long as it remains wet. When conditions allow,...

The Ridgepro Roof Attachment Tool is the ultimate Roof Safety System. It's been specially designed to get you safely from the ladder to the peak and back. The main body is constructed of high-grade aluminum capable of withstanding thousands of pounds of pulling force. The RIDGEPRO features an adjustable pitch-selection grid with an incremental range of 6/12 to 12/12 with pitches etched into the main body. The two padded cross members protect existing surface material from damage and balance...

This 40 oz Vinyl Tear-Off Tarp is built from durable vinyl-coated fabric rated at 40 oz per square yard. It features criss-cross and plus webbing patterns with 2″ high-strength yellow webbing and heavy steel O-rings, enabling debris loads to be lifted by clevis hook. Custom sizes are available. Additional use includes snow removal. Key features: 40 oz per square yard vinyl-coated fabric 2″ yellow webbing sewn in criss-cross / plus patterns 3″ ID × 3⁄8″ heavy steel O-rings on webbing ends 4,000...

The S-5! DualPipe is the aluminum crosspipe component used in DualGard and VersaGard snow retention systems. It features a 1-inch diameter with a 1/8-inch wall for structural strength, and is engineered to integrate seamlessly with S-5! brackets, clamps, and hardware to create a durable, two-pipe snow guard assembly for metal roofs. Key Features: • 1" diameter aluminum pipe with 1/8" wall thickness • Supplied in 7' 8" (DualGard) or 8' (VersaGard) lengths • Engineered for use with S-5! DualGard...

The Jay R. Smith 1010 Series components form a modular system for commercial roof drains, allowing reliable performance and easy customization for project-specific needs. With options such as cast iron domes, polyethylene domes, sump receivers, clamping rings, and underdeck clamps, the 1010 Series provides versatility while ensuring a watertight seal and long service life. These parts are built for commercial, industrial, and institutional flat-roof drainage systems and are engineered for...

This item is a bulk 50 lb box of white fleece wiping rags marketed as “White Fleece Wiper.” The product is intended for general wiping, dusting, polishing, and cleaning applications. Users can select the box amount according to jobsite needs. Key Features: Soft white fleece material Packaged in a 50 lb box Suitable for general cleaning, wiping, polishing Labeled “White Fleece Wiper”

Keep warm with the Nordic Blaze 3-in-1 Balaclava. Made from premium 100% polyester polar fleece, the RWL26 balaclava provides superior warmth and flexibility. Its two-piece design using detachable hook and loop offers added functionality because you can wear it three ways: as a full face mask, neck gaiter, or beanie. The long length covers the nose, mouth, and neck and conveniently tucks into your jacket. Plus, the attachment straps can be secured to hard hat suspensions for enhanced...

The RACE AC Air Conditioner Jacks system is engineered to raise rooftop commercial air conditioning units. It comes with four manual jacks and two extensions, enabling a maximum rail spread of 10 ft. The system lifts units up to 4,000 lb, with a lift range from about 5″ to 32″; using a drop leg, the lift extends further. Key Features: 4,000 lb lifting capacity Rail spread up to 10 ft Lifts ~5″ to 32″ range Includes 4 jacks + 2 extensions ...

This package contains four pieces of 3/8″ eyebolt hardware engineered for use with pre-1968 Wade 3000 and 3100 Series roof drains. The kit provides essential fasteners for securing clamp rings and drain components for proven reliability on older drain systems. Key features: Four pieces of 3/8″ eyebolt hardware per package

GreenSlope is a new roofing material made from recycled products designed to reduce the depth of water ponding areas on flat rooftops. Made from Non-Biodegradable materials its built to withstand harsh weathering and last a long time. It's unique properties allow it to be shaped and built up to redirect water towards drainage areas. GreenSlope is easy to work with and can be applied to almost any roof surface, commercial or residential. It can be use around Low Drains, near Scupper and Edges,...

Metal Plus LLC brackets are essential tools in the roofing industry, designed to provide safety, efficiency, and versatility during the installation of standing seam metal roofs. Their unique patented design makes the bracket easy to use and their non-penetrating designs with the rubber pads to prevent scratching on metal roof panels make them an indispensable asset for roofing professionals. These brackets are especially effective for both mechanical standing seam and snap lock standing seam...

SureBond SB-190 is the official snow guard adhesive of SnoBlox-Snojax. We pioneered the use of this adhesive with our polycarbonate snow guards over 25 years ago and now it has become the standard in the industry. For a successful installation the adhesive requires 28 days or (672 Hours) at 50 Degrees (F) or above to achieve full cure. Temperatures below 40 Degrees (F) will delay cure time, until temperatures reach 50 Degrees (F) or above to completely cure. Spring, Summer or early Fall is the...

The S-5! NEX 2.0 Pipe is the primary horizontal crosspipe for X-Gard snow retention systems. Engineered from aluminum for strength and durability, it integrates with S-5! X-Gard clamps and brackets to provide high-performance snow management for standing seam and other compatible metal roof profiles. Key Features: • Core structural pipe component for X-Gard snow retention systems • Engineered aluminum pipe ensures strength and durability • Works with S-5! X-Gard clamps, brackets, and...

The Wade WP3220-1-D Cast Iron Dome is a rugged strainer designed for Wade roof drain assemblies. Made from cast iron, it provides reliable debris protection while maintaining proper water flow. This dome is built for long-term service in commercial, industrial, and institutional roof drainage systems. Key Features: • Heavy-duty cast iron construction for durability • Protects roof drains from debris while allowing water flow • Compatible with Wade roof drain bodies • Suitable for commercial...

The 5 ft × 5 ft LD (light-duty) drain tarp from Big Rock Supply (Item # 329-DT-PC-0505) is designed for quick response roof or ceiling leaks, or leak-prone areas that need short-term diversion. It features a drain spout that connects to a standard ¾″ garden hose to channel water safely away from personnel and equipment. The fabric is 12-mil reinforced polyethylene and is not flame retardant. Heavy D-rings are sewn into each corner to assist hanging and anchoring. Key features: Drain spout...

The RACE 2-Wheel Wheelbarrow is engineered for heavy material transport and dumping. It features an all-welded steel frame, ergonomic steel handles with rubber grips, and a protected tray tip with skid plate. Dual 4.80 × 8" flat-free tires are standard to reduce downtime from flats, and the wheelbarrow is suited for rugged jobsite use. Key Features: 6 cu ft capacity Heavy-duty tubular steel frame Skid plate and rolled tube front protection Dual 4.80 × 8" flat-free tires Ergonomic handles with...

The Van Mark 3017 TrimCutter is a jobsite cutting system that rides on your Van Mark brake to deliver straight, repeatable cuts in aluminum and vinyl trim coil. Instead of fighting snips, utility knives, or wavy edges, the TrimCutter glides along the brake’s edge to produce smooth, factory-like cuts that are ready to bend. Built for siding and roofing contractors, it boosts speed, accuracy, and safety while reducing wasted material and rework. Key Features Brake-Mounted Cutting System Attaches...

The Arctic Warmers Caulk Warmer is an insulated warming bag designed to keep caulk and other temperature-sensitive materials warm and ready in cold conditions. It uses an electric heating element combined with thermal-reflective insulation to maintain internal temperatures up to approximately 115°F while outside temperatures are low. This 12-tube capacity warmer helps contractors maintain material usability for adhesives, sealants, grease cartridges, and similar products during cold-weather...

ChemLink SnowShoe Snow Guards are an adhesive-applied snow retention accessory used to help reduce sudden snow and ice slides off pitched roofs. They’re molded from a durable polycarbonate polymer and are used on a wide range of roof surfaces, including metal, slate, tile, and single-ply membranes. Each carton includes 24 snow guards and the adhesive needed for installation. SnowShoe guards are available in multiple color options for a cleaner finished look on the roof. Key Features...

The Arctic Warmers 20 lb Cylinder Warmer Wrap is an insulated heating wrap for 20 lb propane or foam cylinders. It uses a heat-reflective flexible barrier and closed-cell insulation inside a heavy-duty nylon shell to help maintain consistent warmth around the cylinder in cool or cold conditions. The wrap features adjustable Velcro closures and cinch straps for a secure fit and includes a cord storage pocket for organized jobsite setup. Key Features Designed to fit 20 lb propane or foam...

The Radians Radwear™ RWG800 Silver Series™ is a hi-visibility thermal lined glove with Reflectivz™ Technology. The wind and water resistant shell provides a comfortable fit in harsh environments, and the Reflectivz™ waterproof plated palm provides a slip free grip in all weather conditions. Uses: Construction Rail Industry Traffic Control Low Visibility Conditions

CitraSolv Orange Supreme is a heavy duty degreaser in aerosol form using natural citrus solvents. It is capable of removing grease, oils, gaskets, protective coatings, and other residues. The formula excludes fluorocarbon propellants and chlorinated solvents and leaves a citrus fragrance while being rinsable with water. Key features: Uses natural citrus solvent (d-limonene) No fluorocarbon propellants or chlorinated solvents Rinses with water Effective on asphalt, tar, coatings, and grease...

The Zurn Z121 roof drain features a 12-inch diameter Dura-coated cast iron body with a combination membrane flashing clamp and gravel guard. It can be specified with a low silhouette cast iron dome (variant Z121-CD), a matching clamping ring (Z121-CC), or a topside install Top-Set deck plate (Z121-DP). Key Features 12-inch diameter Dura-coated cast iron body Combination membrane flashing clamp and gravel guard Cast iron dome variant (Z121-CD) Clamping ring available (Z121-CC) Top-Set deck...

The SafeWaze FrogLink Temporary Roof Anchor (019‑4006) is a robust, re‑usable anchorage device engineered for safe single‑person or horizontal lifeline fall protection on wood roofing. It features a 360° anchor ring, an integrated energy absorber, and includes all necessary hardware for installation. Designed for temporary setups and mobile crews, this anchor allows secure fall arrest while meeting OSHA and ANSI safety standards.

Designed for critical waterproofing repairs, 160.1 Amphibicaulk is a resilient caulking‑grade roof cement that adheres reliably to both damp and dry surfaces—even under adverse conditions. Its water‑displacing formulation ensures a secure, durable seal around areas prone to leaks, such as joints, skylights, chimneys, and roof penetrations. Key Features Bonds to damp or dry surfaces with water-displacing properties Ready-to-use caulk-tube format for precise application in tight or vertical...

The Arctic Warmers 5-Gallon Pail Warmer is an insulated wrap designed to maintain consistent internal temperatures for materials stored in standard 5-gallon buckets or pails. It combines a heat-retaining flexible barrier with durable insulation and an automatic thermostat to help keep adhesives, coatings, and other temperature-sensitive materials workable in cold weather. This warmer wraps securely around the container and can be powered from a standard 120 V AC outlet or a 12 V DC inverter...

The 10 ft × 10 ft light-duty drain tarp (Item #329-DT-PC-1010) from Big Rock Supply is designed to protect personnel and equipment from overhead roof or ceiling leaks. It features a drain spout that connects to a standard ¾″ garden hose and heavy D-rings sewn into each corner. Key features: Drain spout connects to a standard ¾″ garden hose to channel water away.  Heavy D-rings sewn into each corner for secure hanging.  Size is 10 ft × 10 ft, offering full-scale 100 sq ft coverage....

The Red Dragon® RD 6009 Roof Dryers defrost, dry and get you back on the job with minimum effort. Our rugged design and user-friendly features make them the perfect choice for professional roofing contractors. Use them to dry surfaces after ponding water has been removed or to remove morning dew, frost or light debris. The Roof Dryers work by combining high heat (up to 350º F) and a 200 mph airstream to facilitate quick drying and reduce costly downtime. There are no electrical cords or danger...

The Josam 414 Cast Iron Clamp Ring is manufactured from coated cast iron in a green finish and is designed for use with Josam 414 series roof drains. It features an outside diameter of 13-1/4 inches and bolt-to-bolt spacings of 10-1/2 inches (180°) and 7-1/2 inches. The ring secures roofing membrane or flashing to the drain body to maintain a watertight seal. Key Features Material: cast iron Color: green Outside diameter: 13-1/4 inches 180° bolt-to-bolt diameter: 10-1/2 inches Bolt-to-bolt...

The SSRA2 Roof Jack Adapters are part of the Standing Seam Roof Anchor system. They allow you to mount 2 in. x 10 in. walk-boards to over 500 standing seam roof panels. The SSRA2 adapter plate simply mounts on top of a Standing Seam Roof Anchor (SSRA1, available separately) that has had the D-ring removed. Constructed of solid 6061-T6 aluminum with stainless steel hardware. The adjustable height stabilizer legs provide a steady mounting bracket on hundreds of different seams. *Brackets should...

The Zurn Z125 roof drain features an 8-3/8 inch diameter Dura-coated cast iron body with a combination membrane flashing clamp and gravel guard. It comes standard with a low silhouette poly dome, and can be specified with a cast iron dome (Z125-CD), a clamping collar (Z125-CC), or a Top-Set deck plate with dome (Z125-DP). Key Features 8-3/8 inch diameter cast iron body Combination membrane flashing clamp with gravel guard Variant options: cast iron dome (Z125-CD), clamping collar (Z125-CC),...

The Zurn Z100 roof drain features a 15-inch diameter Dura-coated cast iron body paired with a poly dome for rooftop drainage. It includes a combination membrane flashing clamp and gravel guard, with availability in multiple pipe sizes and outlet connections. Key Features 15-inch diameter Dura-coated cast iron body Combination membrane flashing clamp and gravel guard Poly dome for rooftop drainage Available in 2, 3, 4, 5, 6, and 8 inch pipe sizes Outlet options include No-Hub, Inside Caulk, and...

Karnak 19 Ultra Rubberized Flashing Cement is a premium-grade, rubber-reinforced asphalt sealant formulated for both wet and dry surfaces. Packaged in a 10.1 oz tube, it’s ideal for quick and emergency repairs on roofing, chimneys, flashing, and other construction surfaces. This versatile cement offers excellent adhesion and flexibility, even under harsh weather conditions, making it a go-to choice for contractors and maintenance crews alike. Key Features Elastomeric rubberized formulation for...

The 5 ft × 5 ft heavy duty flame-retardant drain tarp (Item #329-DT-V N-0505) from Big Rock Supply is crafted to divert overhead leaks in roofing and interior settings. Made from flame-retardant laminated polyester, it features a built-in drain spout that accepts a standard ¾″ garden hose, and heavy D-rings sewn into each corner for easy hanging and anchoring. Key features: Built-in drain spout accepts standard ¾″ garden hose to channel leak water safely away.  Heavy duty D-rings sewn...

The Josam 414 High Hat Cast Iron Dome is constructed from cast iron with a green finish and is designed for compatibility with specific Josam roof drain bodies. It features an approximate outside diameter of 8-¼ inches and an approximate height of 11-½ inches. The dome design helps screen debris while maintaining drainage capacity in compatible roofing systems. Key Features Material: cast iron Outside diameter: approximately 8-¼ inches Height: approximately 11-½ inches Color: green High-hat...

The RACE Rail Skylight Safety Kit is a non-penetrating adjustable system that guards skylights while preserving access to surrounding roof areas. It installs in just minutes and accommodates skylights from 36″ × 36″ to 60″ × 60″. An optional extension pack allows coverage for skylights up to 48″ × 96″. Key features: Non-penetrating design maintains roof integrity Adjustable to fit skylights from 36″×36″ to 60″×60″ Installs quickly for minimal disruption Includes 4 legs, 8 adjustable rails, 8...

The SCUPRD3, SCUPRD4, SCUPRD5, and SCUPRD6 models are part of OMG’s Scupper Thru-Wall RetroDrain product line. Designed to replace existing through-wall or side-wall drains in re-roofing applications, these drains provide a secure and watertight solution without requiring removal of existing plumbing. They feature a durable aluminum body, stainless steel hardware, a large pre-punched flange for flashing integration, and the proven U-Flow mechanical seal to connect securely to PVC or cast iron...

The Van Mark TM10-S Mark II TrimMaster – Contractor is a 10' 6" professional-grade portable siding brake engineered to be a true jobsite workhorse for remodelers, siding installers, and exterior contractors. With a 14" throat depth and advanced POWERslot™ hinge and Power Lock™ bar technology, it delivers crisp, accurate bends in aluminum trim coil, light gauge steel, and other common siding metals. The cam-locking system, hollow-core extrusions, and durable construction provide strong...

MiraCool hard hat pads from Occunomix provide a great way for workers to reduce heat stress in outdoor and other high-heat environments. Just soak the pads in cold water for 10-20 minutes, and the cooling crystals activate, staying hydrated for anywhere from 4 hours to several days, depending on conditions. The soft pad provides added comfort on the top of the head, while the super-absorbent cooling crystals retain moisture to keep the wearer cool all day long. Provide a great way for workers...

This 7 ft × 7 ft heavy-duty flame-retardant drain tarp (Item #329-DT-VN-0707) from Big Rock Supply is designed to protect personnel and equipment from overhead leaks. It is made of flame-retardant laminated polyester, features a drain spout compatible with a standard ¾″ garden hose, and has heavy D-rings sewn into each corner for hanging. Key features: Built-in drain spout connects to a standard ¾″ garden hose to divert water safely away.  Heavy D-rings sewn into each corner for secure...

The Wade 3108 Flashing Ring is a cast iron accessory designed to seal roof membranes to Wade roof drain assemblies. It offers a secure, watertight fit that helps prevent leaks at critical drainage points, making it ideal for demanding commercial, industrial, and institutional roofing applications. Key Features: • Cast iron construction for durability • Provides watertight seal with roof membrane • Compatible with Wade drain bodies and domes • Built for commercial and industrial roof systems ...

The Manual Push Rhino is engineered for fast removal of existing built-up roofing layers and insulation materials. Its all-steel frame and hardened blade provide durability and strength under heavy use. Equipped with 6″ steel wheels, it allows the operator to push and slide the blade under roofing components easily. Key features: All-steel frame construction Hardened steel blade for cutting material 6″ steel wheels for mobility Designed for manual push removal of roofing layers Heavy-duty...

The Arctic Warmers Junior Caulk Warmer is a compact insulated warming bag designed to hold up to four tubes of caulk or similar materials. It helps maintain internal warmth in cold conditions so temperature-sensitive products remain workable on the jobsite. This unit features insulated construction with a heat-reflective barrier and includes a cord storage pocket for organized setup. Key Features Holds up to 4 tubes of caulk or similar materialsInsulated warming bag with heat-reflective...

The RK800 by Occunomix is a classic hard hat tube liner. This design should fit over most regular brim hard hats and will help retain heat from the ears and up. This design will also help maintain and wick moisture from the brow which is a vital amidst cold climates. Fits snugly over most regular brim hard hats100% Polyester knit pulloverKeeps ears warm and head locked inFits snugly over most regular brim hard hatsBlocks wind tunneling inside the crownFolds up on the outside of hard hat, when...