Van Mark 3017 TrimCutter

The Van Mark 3017 TrimCutter is a jobsite cutting system that rides on your Van Mark brake to deliver straight, repeatable cuts in aluminum and vinyl trim coil. Instead of fighting snips, utility knives, or wavy edges, the TrimCutter glides along the brake’s edge to produce smooth, factory-like cuts that are ready to bend. Built for siding and roofing contractors, it boosts speed, accuracy, and safety while reducing wasted material and rework.

Key Features

• Brake-Mounted Cutting System
  Attaches to compatible Van Mark brakes so you can measure, cut, and bend all in one place without moving material between tools.
• Clean, Straight Cuts
  Guided track design helps produce consistent, dead-straight cuts across the full width of trim coil, reducing edge waviness and improving finished trim quality.
• Designed for Trim Coil
  Optimized for aluminum and vinyl trim coil commonly used in fascia, soffit, window and door trim, and other siding details.
• Fast, Repeatable Operation
  Once positioned, the TrimCutter lets you slice multiple pieces to the same width quickly, ideal for production runs of fascia or trim.
• Reduced Burrs & Deformation
  Cutting action is engineered to minimize burrs and distortion on the cut edge so parts feed smoothly into the brake and bend cleanly.
• Improved Jobsite Safety
  Helps cut down on excessive use of razor knives and hand snips, which can lead to slips and jagged edges.
• Durable Construction
  Built with rugged materials suited for everyday contractor use and transport, so it stands up to life in the truck and on the jobsite.

Tool Type: Brake-mounted trim coil cutting accessory

Compatibility:

• Compatible Brakes: Selected Van Mark brakes (varies by model series; typically Mark series / TrimMaster style brakes)

Maximum Material Width:

• Trim Coil Width: Up to standard coil widths used on compatible brakes (commonly up to 24 in+, depending on brake and setup)

Material Capacity (Typical Use):

• Aluminum Trim Coil: Standard siding/trim thicknesses
• Vinyl/PVC Trim Coil: Standard residential trim coil thicknesses

Cut Type:

• Cut Style: Straight, guided track cut along brake
• Edge Quality: Designed for smooth, burr-minimized edges suitable for immediate bending

Dimensions (Approximate):

• Length: Sized to span the working width of the brake (usually around the full brake length track)
• Height: Compact profile to stay out of the way of normal brake operation
• Depth: Low-profile to ride tight to the front edge of the brake

(Exact numeric dimensions aren’t prominently published for this accessory, but it is designed to match the working envelope of the brake rather than standalone footprint.)

Weight (Approximate):

• Tool Weight: Lightweight accessory engineered for easy installation and removal (exact published weight is not typically specified, but it’s light enough for one-person handling and frequent use on site)

Material:

• Body: Durable metal construction suitable for daily contractor use
• Cutting Mechanism: Hardened cutting components engineered for repeated cuts in aluminum and vinyl trim coil
• Guides/Track: Rigid guiding system that rides the brake for straight, repeatable cuts

Mounting / Use:

• Mount Style: Attaches to the front/working edge of compatible Van Mark brakes
• Operation: Manual, hand-pulled cutting pass along the guide track

Q: What does the Van Mark 3017 TrimCutter do?
A: The 3017 TrimCutter is a brake-mounted cutting accessory that lets you make fast, straight cuts in aluminum and vinyl trim coil right on your Van Mark brake. It helps you size coil stock accurately before bending it into fascia, soffit, and other trim pieces.

Q: Which materials can I cut with the Van Mark 3017 TrimCutter?
A: The TrimCutter is designed primarily for aluminum and vinyl/PVC trim coil in standard residential siding and trim thicknesses. It’s intended for light-gauge sheet materials used in exterior trim work, not for heavy steel or structural metals.

Q: Will the 3017 TrimCutter fit any Van Mark brake?
A: The 3017 is made to work with specific Van Mark brake models and rides on the front edge/track of the brake. Before purchasing, you should verify compatibility with your exact brake series and length to ensure proper mounting and smooth operation.

Q: Does using the TrimCutter affect normal brake operation?
A: No. When installed correctly, the TrimCutter rides along the front of the brake and is used only during cutting. You can still clamp and bend metal as usual; the cutter simply gives you a guided, straight-edge cutting option without constantly reaching for snips or a utility knife.