Specials

The OMG XHD008B is an 8-inch #15 Extra Heavy Duty roofing fastener engineered for attaching insulation and membrane into light gauge steel, OSB, plywood, and aluminum decks. Oversized shank and thread diameters maximize pull-out strength, while deep buttress threads reduce pull-out and back-out. The miniature drill point ensures quick penetration and the CR-10 coating protects against corrosion in demanding environments. Key Features: Oversized shank and threads deliver superior pull-out...

Ideal for use in cold weather work conditions such as construction, word work, refineries, oil drilling, maintenance, mining, etc.Winter Liner w/ Mouthpiece, 2 Layer Cotton Twill/Fleece, Mid Length , Navy Blue, FR Treated, Insulated Ear Barrier, Reflective Strip PIP 364-ML2FMP Features: Mid-length2 layersCotton twill/fleeceSelf extinguishing treated cotton, up to 30 washesInsulated ear barrierSilver reflective stripOne size fits most ...

The Portals Plus Round Adapter for 2 ½″ OD (Item #: POR-14100) is a retrofit component used to adapt round roof penetrations approximately 2.5 inches outer diameter into a compatible retrofit flashing boot. It is installed by fitting around the projection, seating into the correct step of the boot (boot not included), and tightening a clamp (not included) to achieve a watertight seal. This approach lets installers handle non-standard penetrations without full custom boot fabrication. Key...

The Portals Plus Round Adapter for 3 in. OD (Item #: POR-14120) is designed to flash small or non-standard roof penetrations by adapting a 3-inch outer-diameter projection to a compatible retrofit boot. The adapter fits around the penetration, seats into the appropriate step of the retrofit boot, and is then tightened with a clamp (boot and clamp not included). This provides a positive, secure method for flashing irregular shapes. Key features: Adapts 3″ OD penetrations to compatible retrofit...

The Powerblanket 2-Gallon Bucket Heater is engineered to maintain the viscosity and thermal consistency of temperature-sensitive materials in standard 2-gallon containers. It features a patented full-surface wrap design that eliminates hot and cold spots and is compatible with both poly and steel buckets. Models are available for 120 V or 240 V operation and include optional adjustable or fixed thermostats for precise temperature control. Key features: Full-coverage wrap design for uniform...

This Razor-Back digging shovel used for all construction, lawn and garden work. It is the highest quality garden tool. It is ideal for a variety of uses, such as digging, planting, cutting sod and small roots. A heavy-duty, forged-steel digging shovel with a 48″ hardwood handle and a cushioned grip. It features SuperSocket™ reinforcement and a large PowerStep™ for better leverage and comfort. Heavy gauge, tempered-steel blade for maximum strength, extremely sturdy forged steel blade that...

The Razor‑Back 48″ wood-handle shovel (model 2593700) offers excellent quality for its price. It’s heavy-duty enough for tough outdoor chores, backed by warranty, and appreciated by users—especially when well-maintained. This shovel is an essential part of any tool assortment. Ideal for lifting and moving heavy loads of rock, soil and other materials. Designed to transport loose material, such as soil, sand and gravel.For transferring heavy, loose material48" North American Hardwood...

Replacement chalkline cord

Replacement line for Reel fast chalk line

Straight 18" neoprene notched squeegee refill designed for spreading coatings and adhesives at a consistent rate. The 1/4" notched edge helps control material distribution, making it suitable for roofing and general application work. Built as a replacement blade for compatible squeegee frames. Key features: 18" straight squeegee refill 1/4" notched edge for controlled material spread Neoprene construction Designed for coatings and adhesive application Replacement blade for squeegee frames ...

Straight 30" neoprene squeegee refill designed for spreading coatings and adhesives across larger surface areas. The smooth edge allows for even material distribution, making it suitable for roofing and general application work. Built as a replacement blade for compatible squeegee frames. Key features: 30" straight squeegee refill Smooth edge for even material spread Neoprene construction Designed for coatings and adhesive application Replacement blade for squeegee frames ...

The Tomahawk TG12000iT is a tri-fuel inverter generator designed to deliver stable power for jobsites, backup power, and equipment use. It runs on gasoline, propane (LPG), or natural gas and features inverter technology for clean, consistent power suitable for sensitive electronics. The unit includes electric start, a digital display for real-time monitoring, and a wheel kit with locking handle for mobility. Key features Tri-fuel capability: gasoline, LPG, and natural gas Inverter technology...

Tremco Dymonic FC is a premium, single-component, silane-modified polymer hybrid sealant engineered for high-performance sealing in dynamic building joints. It cures rapidly—skinning in as little as 60 minutes and becoming tack-free in 3–4 hours—minimizing dirt pickup and early movement cracking. With ±35 % movement capability, it accommodates expansion and contraction in joints while maintaining long-term flexibility. Once cured, it adheres tenaciously to common substrates like precast...

Tremco Dymonic FC is a premium, single-component, silane-modified polymer hybrid sealant engineered for high-performance sealing in dynamic building joints. It cures rapidly—skinning in as little as 60 minutes and becoming tack-free in 3–4 hours—minimizing dirt pickup and early movement cracking. With ±35 % movement capability, it accommodates expansion and contraction in joints while maintaining long-term flexibility. Once cured, it adheres tenaciously to common substrates like precast...

The Capital Safety AB17530 Protecta First 5-Point Harness is a full-body safety harness sized XL. It features a rear D-ring attachment point, pass-through buckles at the chest and legs, and 1.75″ wide polyester webbing in blue with yellow underside. This harness includes a padded back plaque and five adjustment points to help achieve a secure fit. All information is taken directly from the manufacturer product page. Key Features Full-body safety harness with five adjustment pointsRear...

CNS130 Cooling Hard Hat Pad Evaporative cooling material provides hours of heat stress reliefEvaporative cooling material keeps you cool for hoursKeeps your head cool and blocks sun from your neckMade from soft quilted hi-vis material for greater visibilityFits on the suspension of a hard hat with hook and loop closuresTo activate, soak in cool water for 2-5 minutesReusable – just reactivateOne size fits al ...

CNS140 Cooling Hard Hat Pad & Neck Shade - Orange Evaporative cooling material keeps you cool for hoursKeeps your head cool and blocks sun from your neckMade from soft quilted hi-vis material for greater visibilityFits on the suspension of a hard hat with hook and loop closuresTo activate, soak in cool water for 2-5 minutesReusable – just reactivateOne size fits all

CSK111 Cooling Skull Cap Liner - BlackMade from moisture wicking soft fabricTraps sweat, keeping it out of your eyesFits under hard hatsOne size fits mostMaterial rated UPF 45

Features: Elastic chin strap with chin cup for a comfortable fitQuick clips design for easy installation on most hard hats on the marketAdjustable buckle on both sides to make length adjustment easy Packaging:  Bag: 12pcs Specs: Dims: 33cm x 4.5cm x 2.5cmCup: 8cm x 4cm x 2.5cmweight: 14g Component:  Elastic Band Chin Cup and ClipsBuckle  Material: Rubber, TC FabricHigh Density PE POM  ...

Middle layer of foamPatented style easily attaches to hard hat suspension with fold over clipsOriginal 8MM thickness