Package Quantity: 500 per box
Price: $310.83
Item #OMG-XHD007B
Write a review!
Description
The OMG XHD007B is a 7-inch #15 Extra Heavy Duty roofing fastener designed for securing insulation and membrane to light gauge steel, OSB, plywood, and aluminum decks. It features oversized shank and thread diameters for maximum pull-out strength, deep buttress threads for added back-out resistance, and a miniature drill point for quick penetration. The CR-10 coating provides reliable corrosion resistance for long-term performance.
Key Features:
-
Oversized shank and thread diameters increase pull-out resistance
-
Deep buttress thread profile helps resist pull-out and back-out
-
Miniature drill point for fast and clean penetration
-
#3 Phillips truss head for compatibility with screw guns
-
CR-10 corrosion-resistant coating with FM and Miami-Dade approvals
Specifications
- SKU / Model: XHD007B
-
Thread diameter: 0.265 in (6.73 mm)
-
Shank diameter: 0.202 in (5.13 mm)
-
Head diameter: 0.435 in (11.04 mm), #3 Phillips truss
-
Thread pitch: 13 threads per inch (full thread)
-
Point type: miniature drill point
-
Coating: CR-10 corrosion-resistant coating (FM 4470 and EAD 030351-00-0402 compliant)
-
Length: 7 in (178 mm)
-
Weight per box: ~55 lbs (24.95 kg)
How To
- Select the fastener length based on insulation and membrane thickness plus required embedment depth.
-
Drill pilot holes if needed depending on substrate condition.
-
Position the fastener perpendicular to the deck, with plate if used.
-
Drive with a #3 Phillips bit until the head is flush and a slight depression forms; avoid overdriving.
-
Confirm insulation boards and plates remain secure and level.
-
Perform pull tests in representative areas to validate anchorage.
FAQs
Q: What substrates can XHD007B be used with?
A: It is approved for use in light gauge steel (20 GA and lighter), OSB, plywood, and aluminum decks.
Q: How many fasteners are in a box of XHD007B?
A: 1,000 fasteners per box.
Q: Does XHD007B have FM and Miami-Dade approval?
A: Yes, it is FM approved and Miami-Dade accepted.
Q: What embedment depths are required for installation?
A: Minimum ¾ in through steel or aluminum flute, ¾ in through OSB/plywood underside, and 1 in into wood plank.
Q: What corrosion protection is applied to XHD007B?
A: CR-10 corrosion-resistant coating for superior protection against rust and environmental exposure.
Reviews (0) • Write a review!
This product has no reviews yet. Write a review!