Price: $16.01
Item #S-5-X-GARD-2.0
Write a review!
Description
The S-5! X-Gard 2.0 Bracket is a one-piece, octagonal bracket engineered to secure both pipes of the X-Gard 2.0 dual-pipe snow guard system to standard S-5! clamps. It is part of a non-penetrating, high tensile system designed to support heavy snow loads, fit standing seam profiles, and allow for safe retrofits or new roof installs.
Key Features:
• Octagonal, one-piece bracket that holds both pipes in dual-pipe X-Gard 2.0 system
• Uses two S-5! clamps per bracket for secure, non-penetrating attachment
• Works with NEX 2.0 pipe crossmembers that span up to 48 inches and can cantilever up to 20 inches past last clamp
• Designed for standing seam metal roofs, retains roof warranties
• Finished height above panel is approximately 7-9 inches depending on seam profile
Specifications
• Type: Bracket for dual-pipe snow guard system (X-Gard 2.0)
• Material: High tensile aluminum casting or extrusion compatible with NEX 2.0 pipes and stainless steel hardware
• Pipe compatibility: Designed for NEX 2.0 octagonal 2-inch pipe crossmembers
• Clamp count per bracket: Two S-5! clamps required per bracket
• Finish options: Paintable, powder-coatable or anodizable finishes available through distributor
• Includes: X-Gard 2.0 Bracket hardware; bracket body itself
How To
- Determine correct locations along standing seam roof based on engineering layout for X-Gard 2.0 dual-pipe system.
-
Install two S-5! clamps at each bracket location, aligned properly on the seam.
-
Slide or place the X-Gard 2.0 Bracket over the two clamp bodies, aligning bracket holes.
-
Secure bracket by tightening hardware to clamp bodies per S-5! torque specs.
-
Mount the two NEX 2.0 crossmember pipes into the bracket’s pipe slots.
-
Install splice kits (if required between pipe sections), end caps, and optional X-Clip II or III accessories for snow migration control.
FAQs
Q: How many clamps are needed per X-Gard 2.0 Bracket?
A: Two S-5! clamps are used per bracket in the dual-pipe X-Gard 2.0 configuration.
Q: What type of pipe works with this bracket?
A: It is designed for use with the NEX 2.0 octagonal 2-inch crossmember pipes.
Q: Will the bracket damage roof seams or void warranty?
A: No. The system is non-penetrating, using round-point setscrews on clamps, preserving roof panel protective finishes and warranties.
Q: Can the X-Gard 2.0 Bracket be used in retrofit installations?
A: Yes. It is suitable for both new construction and retrofit installations on standing seam roofs.
Reviews (0) • Write a review!
This product has no reviews yet. Write a review!
S-5 X-Gard 1.0 Bracket
X-Gard™? can be purchased as a one- or two-pipe system, using standard S-5! clamps, depending on project specifics including pitch and snow load.
Price: $6.33
Availability: In Stock
Usually ships within 1-2 Business Days
The S-5! X-Gard 1.0 Bracket is a heavy-duty snow retention system component designed to hold one NEX 2.0 pipe firmly across standing seam metal roofs. Built from high-strength aluminum with stainless steel hardware, the bracket attaches securely to S-5! clamps, ensuring long-term reliability without compromising roof integrity. This bracket is engineered for use in regions with heavy snow loads, helping prevent snow avalanches that could damage property or endanger pedestrians. When combined...
S-5 NEX 2.0 Pipe for X-Gard
NEX-2.0 pipe for X-Gard snow retention systems is a special tubular extrusion that offers light weight (0.56lbs per foot) and superior strength capable of spanning up to 48".
Price: $55.28
Availability: In Stock
Usually ships within 1-2 Business Days
The S-5! NEX 2.0 Pipe is the primary horizontal crosspipe for X-Gard snow retention systems. Engineered from aluminum for strength and durability, it integrates with S-5! X-Gard clamps and brackets to provide high-performance snow management for standing seam and other compatible metal roof profiles. Key Features: • Core structural pipe component for X-Gard snow retention systems • Engineered aluminum pipe ensures strength and durability • Works with S-5! X-Gard clamps, brackets, and...
S-5 X-Clip II for X-Gard
Designed exclusively for the X-Gard snow retention system from S-5!, the X-Clip II & X-Clip III are optional components that can be added to your X-Gard 1.0 or X-Gard 2.0 system to further retard the migration of snow down the roof.
Price: $7.25
Availability: In Stock
Usually ships within 1-2 Business Days
The S-5! X-Clip II is an optional accessory designed for the S-5! X-Gard 1.0 and 2.0 snow retention systems. This clip mounts to the NEX 2.0 pipe and rests on the roof panel flat, using its integrated rubber foot to reduce snow and ice migration under the rail. It is engineered for seam heights between 1″ and 1.75″, with added compatibility for some 2″ vertical seams. Made from durable aluminum with a protective rubber foot, the X-Clip II installs easily and includes a stainless steel...
S-5 Endcap for X-Gard
One cap is need for each open end of the pipe.
Price: $2.55
Availability: In Stock
Usually ships within 1-2 Business Days
The S-5! Endcap for X-Gard is a simple but essential accessory for the X-Gard snow retention system. It caps the open ends of NEX 2.0 pipes to prevent entry of water, debris, insects, and vermin, which could compromise system integrity or lead to corrosion and damage inside the pipe. Made of durable black vinyl, the endcap stretches to fit snugly and remains flexible over time, even under temperature extremes. It is used at every open pipe end in the snow guard assembly and helps ensure the...