Package Quantity: 500 per box
Price: $226.69
Item #OMG-XHD006B
Write a review!
Description
The OMG XHD006B is a 6-inch #15 Extra Heavy Duty roofing fastener designed for attaching insulation and membrane to light gauge steel, OSB, plywood, and aluminum decks. With oversized shank and thread diameters, it offers maximum pull-out resistance. Deep buttress threads reduce pull-out and back-out risks, while the miniature drill point provides quick penetration. The CR-10 coating ensures long-lasting corrosion protection.
Key Features:
-
Oversized shank and threads improve pull-out resistance
-
Deep buttress threads provide pull-out and back-out protection
-
Miniature drill point enables fast penetration into substrates
-
#3 Phillips truss head for reliable driving
-
CR-10 corrosion-resistant coating with FM and Miami-Dade approval
Specifications
- SKU / Model: XHD006B
-
Thread diameter: 0.265 in (6.73 mm)
-
Shank diameter: 0.202 in (5.13 mm)
-
Head diameter: 0.435 in (11.04 mm), #3 Phillips truss
-
Thread pitch: 13 threads per inch (full thread)
-
Point type: miniature drill point
-
Coating: CR-10 corrosion-resistant coating (FM 4470 and EAD 030351-00-0402 compliant)
-
Length: 6 in (152 mm)
-
Weight per box: ~48 lbs (21.77 kg)
How To
- Select fastener length based on insulation and membrane thickness plus embedment.
-
Drill pilot holes if required by deck conditions.
-
Align the fastener perpendicular to deck and position with plate if used.
-
Drive the fastener with a #3 Phillips bit until seated flush and a depression appears; avoid overdriving.
-
Ensure insulation boards and plates are level and secure.
-
Perform pull tests in representative areas to confirm performance.
FAQs
Q: What substrates can XHD006B be used with?
A: Light gauge steel (20 GA and lighter), OSB, plywood, and aluminum decks.
Q: How many fasteners are packaged per box?
A: 1,000 per box.
Q: Does XHD006B meet FM and Miami-Dade standards?
A: Yes, it is FM approved and Miami-Dade accepted.
Q: What embedment depths are required?
A: At least ¾ in through steel or aluminum flute, ¾ in through OSB/plywood underside, and minimum 1 in into wood plank.
Q: What type of corrosion protection does it feature?
A: CR-10 corrosion-resistant coating, designed to reduce red rust and extend fastener service life.
Reviews (0) • Write a review!
This product has no reviews yet. Write a review!