Does not ship free

Best Price Guaranteed
Price: $32.10
    Item #LUC-777-3
    Write a review!
    Quantity:

    Description

    Lucas #777 Rubberized Flashing Cement is a premium grade trowel applied flashing cement used to Install, Repair, or Rebuild Roof Flashing at parapet walls, gravel stops, stacks, vents, monitors, and similar applications. #777 may be used with Polyester fabric reinforcement for permanent repairs to asphalt and modified bitumen roof. This product may be applied to wet and underwater surfaces

    APPLICATION

    The surface must be clean and debris free to be repaired. Apply rubberized flashing cement evenly with a pointed roofers trowel or gloved hand. #777 should be applied 1/8 to 1/4 of an inch thick and may be reinforced with Polyester fabric to strengthen the repair. When making a permanent repair to a blister, open the area and allow it to dry thoroughly. In order to adhere to wet surfaces, apply the product in one direction with sufficient force to displace the water from underneath

    CAUTION

    Warning! Combustible Liquid and Vapor.

    Contains petroleum distillates, keep away from heat and open flames. Avoid prolonged contact with or inhalation of solvent fumes. A NIOSH approved respirator with organic vapor cartridges is recommended. Do not take internally if swallowed, do not induce to vomiting. Contact medical personnel immediately

    Reviews (0) • Write a review!

    This product has no reviews yet. Write a review!

    Related Items
    R.M. Lucas 115 - Detergant Roof Primer
    Lucas #115 is formulated from surfactants and alkaline cleaning agents.
    Price: $45.80
    Availability: In Stock
    Usually ships within 1-2 Business Days

      Pretreatment to all types of roofs prior to power washing. Lucas #115 is a detergent intended for application to all types of roofs prior to power washing. #115 lifts dirt and grease from the surface of the roof including small pores and irregularities. Lucas 115 cleaner is a concentrated blend of alkaline cleaners, surfactants and biocides intended for the cleaning and preparation of roofs prior to application of various roof coatings. APPLICATION Mix one part Lucas #115 with four parts...

      R.M. Lucas 776 - Elite Flashing Cement Rubberized 3 GAL
      Designed as a super-premium, high-performance flashing cement for use on modified bitumen and asphalt roofs
      Price: $45.60
      Availability: In Stock
      Usually ships within 1-2 Business Days

        Lucas #776 Elite™ Flashing Cement is designed as a super-premium, high-performance flashing cement intended for use on modified bitumen and asphalt roofs. It is also an excellent cold process inter-ply adhesive for SBS modified bitumen single-ply membranes. Cold process adhesives eliminate the need for hazardous torches and hot asphalt kettles. Also an excellent form tie cement for use with rubberized asphalt waterproofing systems.Lucas Elite™ Flashing Cement is the highest quality, most...

        R.M. Lucas 9600 - STS Moisture Cure Joint Sealant, 10 oz....
        Non-shrinking moisture cure urethane sealant
        Price: $6.65
        Availability: In Stock
        Usually ships within 1-2 Business Days

          Lucas #9600 Joint & Termination Sealant is a 100% solids non-shrinking moisture cure urethane sealant intended for sealing large joints and roof termination bars. Minimal odor, contains no solvents and less than 10 grams per liter VOC. Excellent adhesion to concrete, masonry, EPDM, PVC, wood, vinyl and most other common building materials. APPLICATION To use this product cut the tip to the desired size and puncture the foil seal. Small orifice size and/or an incompletely punctured seal may...

          R.M. Lucas 8800 - Universal Single-Ply Adhesive, 5 gal.
          Universal Singl-Ply Adhesive, Water Based
          Price: $166.40
          Availability: In Stock
          Usually ships within 1-2 Business Days

            Lucas #8800 Universal Single-Ply Adhesive is a water based contact adhesive for securing EPDM, TPO, PVC and other single-ply membranes to wood, metal, concrete, and other type of roofing solutions. Fast drying with aggressive tack, #8800 bonds instantly without the risk of fire associated with flammable solvent based adhesive. VOC compliant in all of North America APPLICATION Surface must be clean and dry, temperature must be a minimum of 40 degrees F with humidity of less that 90% for proper...

            Leave a message