Equipment

The Tramex RWS Roof & Wall Scanner is a handheld, non-destructive moisture-scanning device built to evaluate moisture conditions in roofing membranes, foam insulation systems and exterior insulation finishing systems (EIFS). The instrument uses low-frequency impedance signals delivered through base electrodes to detect excess moisture and trace the source of leaks or elevated moisture. The scanner features dual operating modes (Roofing and EIFS/Wall) with selectable sensitivity ranges and...

The Guardian Fall Protection 2-Rung Ladder Jack is MIG welded and possesses a riveted construction for superior strength and durability. It is set-up over 2 consecutive ladder rungs, can be used on either side of a ladder, and is ideal for painting, siding, and repair applications. This jack is easy to both install and remove, and will even accommodate planking up to 18 inches wide when used in combination with a paired Ladder Jack, and installed and used in accordance with all applicable OSHA...

The Model #101 Bucket and Carrier gently transports hot stuff to where you are mopping. Features- Rubber wheels Bucket detaches from handy tubular steel carrier Carrier features mop handle support Bucket capacity: 8 gallons

Designed for hauling and unloading debris. Workhorse attachments can easily be changed over in minutes.

The RACE 1½ in Ward Union is a standard-wrench union sized for kettle and plumbing connections. It is constructed of malleable iron with a brass and iron seat to provide a secure, durable seal. The union uses a black finish and is suited for Class 150 applications. Key features: Standard wrench-type union design Made of malleable iron with brass/iron seating Black finished body for corrosion resistance Designed to join two pipe ends securely Suitable for kettle and plumbing fitting...

The OMG RBT007 RhinoBond with OptiWeld kit is a next-generation induction welder designed to weld RhinoBond plates under TPO or PVC membranes without penetrating the membrane. It includes built-in OptiWeld automatic calibration to adjust energy for membranes up to 80 mils thick, a bright LED touch display, and comes with a 6-pack of heat sink magnets. The tool is built to improve speed, consistency, and reliability for commercial roofing contractors. Key Features automatic calibration...

The Powerblanket HB64ROOF Roofer Hot Box is a bulk material warmer specifically designed for roofing applications. With a 64 cu. ft. heating capacity, it protects shingles, adhesives, sealants, and tools from cold-weather damage. Using an internal preset thermostat, the unit maintains an approximate product temperature of 100°F, ensuring materials remain workable even in freezing conditions. Portable and durable, the HB64ROOF is built for job sites where consistent heating and productivity...

Replacement pin for the SPAR Rotary Planer.

The BS-BSWHL is the standard replacement wheel for Rooftop Equipment Better Spreader systems. It measures 6 inches in outer diameter by 1.50 inches wide and fits a ½-inch axle, providing reliable support and consistent performance under load. This wheel is made from durable materials suitable for roof surface conditions and repeated usage. Key features: 6″ outer diameter × 1.50″ width ½″ axle bore for standard Better Spreader configurations Durable construction suitable for roofing...

The Powerblanket HB48-1200 Hot Box is a bulk material warmer designed to keep temperature-sensitive products ready for use in cold conditions. Its insulated enclosure and internal preset control deliver even, reliable heat across a 48 cu. ft. interior, helping prevent freeze damage and viscosity issues while reducing energy waste versus heating whole rooms. Built for portability and simple setup, it’s ideal for job sites and storage areas where consistent, safe warming matters. Key Features:...

The Van Mark USA1EZ UniStandEZ is a rugged, purpose-built stand engineered to support TrimMaster TM10 and IT10 brakes on the jobsite. Instead of wrestling with sawhorses or unstable homemade setups, this stand gives you a solid, ergonomic platform so you can focus on accurate bends and faster production. Its adjustable legs help dial in a comfortable working height, while the smart, balanced design makes it easier to move your TrimMaster between the truck, shop, and jobsite without...

The Powerblanket HB64PRO-1440 is a 64 cu. ft. bulk material warmer built for precise, consistent heating in cold conditions. Its programmable digital controller maintains an approximate product temperature of 100ºF, helping protect temperature-sensitive materials from freeze damage and viscosity issues. With a 120V, 1,440-watt design and 15-amp plug, it delivers reliable performance for job sites and storage areas where dependable heat matters. Key Features: 64 cu. ft. capacity for palletized...

Rooftop Equipment Mid Coverage Better Spreader Replacement Rollers are built for balanced coating distribution on flat or low-slope roofing surfaces. Available in 14", 27", and 40" widths, each roller features a ¾-inch nap that delivers optimal coating retention and smooth application without streaking. Designed to fit Rooftop Equipment Better Spreader frames, these rollers provide professional-grade performance and long service life. Key features: Available in 14", 27", and 40" roller widths...

OBPC15KIT is a conversion kit for OMG PaceCart 2B and PaceCart 3 equipment that allows contractors to use two 15-gallon drums (30 gallons total) of OlyBond500 adhesive instead of smaller bag-in-box sets. It increases dispensing capacity, saves time by reducing refills, and installs quickly in under 15 minutes. The kit provides flexibility to use drums or bag-in-box sets as job conditions demand, enhancing productivity on large roofing jobs. Key Features conversion to allow use of 15-gal drums...

The Powerblanket Lite PBL15 is a lightweight drum heater built for 15-gallon containers. Using the same patented Powerblanket technology as full-size models, it delivers safe, even heat distribution across the drum surface. With a preset thermostat set at 145°F, the PBL15 prevents material damage from cold weather while maintaining consistent performance. Easy to install, energy-efficient, and portable, it is a practical solution for a variety of heating needs.Key Features: Designed for...

The Kirby Fiberglass Applicator Brush line (models KF100, KF102, KF103, KF105) is designed for professional application of sealers, resins, epoxies, and specialty coatings on floors and other smooth surfaces. Built with durable construction and dependable coverage, these brushes help deliver clean lines and even film thickness, whether you’re edging, cutting in, or coating larger areas. With multiple model options to match different application needs, Kirby Fiberglass applicator brushes are...

Rooftop Equipment Low Coverage Better Spreader Replacement Rollers are designed for smooth and accurate low-volume coating application on flat and low-slope roofs. Available in 14", 27", and 40" widths, these rollers feature a ½-inch nap for precise material control and reduced coating waste. Each roller is engineered for use with Rooftop Equipment Better Spreader frames and delivers consistent, even coverage on large commercial roof surfaces. Key features: Available in 14", 27", and 40"...

The Malco MB48A Portable Mini Brake is a field-ready sheet metal brake designed for forming bends in roofing, HVAC, and general fabrication work. Its portable design allows it to be used directly on the jobsite—such as on a workbench or truck tailgate—while still delivering controlled, consistent bends across full 48" panel widths. It can form bends up to 135° in materials like aluminum, copper, and up to 22-gauge galvanized steel. Key Features Produces bends up to 135° in common sheet...

Features:Dumper tray mounts and dismounts quicklyDesigned for one man to dump full loadLarge wheels and extended rear axle provides extra stability and safetyDimensions : 36 in. x 60 in. x 18 in.Capacity : 22.5 cu. ft.

This heater wrap is designed for use with 55-gallon pails to maintain optimal material temperature. It features an adjustable thermostat from 50° to 400 °F and a 3″ reinforced silicone rubber band. Its power specification is 115 V, 300 W, and it fits pails with diameter tolerance of ±1″. Key Features: Thermostat adjustable 50°–400 °F Reinforced 3″ silicone rubber band 115 V, 300 W power rating Fits pail diameters ±1″ tolerance ...

The ACRO 29608 Roof Bracket is a contractor-grade, 60° angled support bracket with a generous 19″ back plate, specifically designed for use with structurally sound 2×8 lumber planks. It includes four OSHA-compliant offset nail slots to prevent upward slippage, reinforced with six long welds, a back-stiffening rib, and a welded gusset to provide exceptional strength and resistance to twisting or bending. The bracket’s smooth, rounded edges protect hands and roofing materials, and its...

The Guardian Fall Protection 3-Rung Ladder Jack is MIG Welded and possesses a riveted construction for superior strength and durability. It is set-up over 3 consecutive ladder rungs, can be used on either side of a ladder, and is ideal for painting, siding, and repair applications. This jack is easy to both install and remove, and will even accommodate planking up to 18 inches wide when used in combination with a paired Ladder Jack, and installed and used in accordance with all applicable OSHA...

The RACE 40MM Replacement Silicone Band is made to fit auto-welding machines that require a 40 mm band. It is compatible with machines from manufacturers like BAK, Leister, and Sievert. The silicone material offers flexibility and resilience during welding operations. Key features: Silicone 40 mm band Fits BAK, Leister, Sievert and other auto-welders Durable and flexible material Helps eliminate wrinkles and improve welding stability  Simple replacement part for maintenance ...

The Arctic Warmer is a flexible wrap heater designed to warm 10 oz tubes of adhesives and sealants, enabling smoother application in cold conditions. It is constructed to maintain consistent warmth across the length of the tube. Users can wrap it around the cartridge to improve flow during cold weather. Key Features: Heats 10 oz cartridges evenly Flexible wrap design Enhances dispensing in cold conditions Maintains consistent warmth along tube ...

The Powerblanket Lite PBLHB48-800 is a portable 48-cubic-foot hot box designed to preserve temperature-sensitive materials on jobsites and in storage. With an internal preset of 100°F (±10°F), it provides safe, even warmth and assembles quickly around a 48" x 36" pallet up to 48" high. Its efficient Lite design and standard 120V plug make it a practical solution for roofing materials, coatings, resins, and more. Key Features: 48 cu. ft capacity; fits a 48" x 36" pallet up to 48" tall Internal...

The RACE Mini Low Profile Roof Cutter is a compact cutter powered by a 5.5 HP Honda GX160 engine for durable performance. Its low profile chassis and adjustable handle allow access under rooftop structures and in tight spaces. The design incorporates easy belt access and a replaceable blade for field serviceability. Key features: Low profile design allows cutting under rooftop obstructions Adjustable handle extends reach into tight areas Replaceable blade system simplifies maintenance Easy...

Rooftop Equipment Hi Coverage Better Spreader Replacement Rollers are engineered for maximum coating retention and coverage on large, flat roofing surfaces. Available in 14", 27", and 40" widths, each roller features a 1-inch nap designed to hold more coating material while maintaining smooth, uniform application. These rollers fit Rooftop Equipment Better Spreader frame systems and are ideal for applying silicone, acrylic, and asphalt-based coatings efficiently and evenly. Key features:...

The BS-BSHG is the hole guide accessory used with Rooftop Equipment Better Spreader units to ensure properly spaced dispensing holes in adhesive cans. It aligns and spaces holes at recommended intervals to produce uniform adhesive flow. This replacement guide enables consistent performance and helps prevent underfeeding or over-feed issues. Key features: Provides template spacing for adhesive dispensing holes Ensures even and consistent adhesive flow in Better Spreader systems Quick and easy...

The Tie Down TranzSporter TP250 Platform Hoist is engineered for safe and efficient lifting of shingles, insulation, plywood, and rolled goods up to 250 lb. It includes a collapsible aluminum carriage with cam follower tracking, rolled goods and plywood brackets, and motor choices in gas or electric. The system extends up to 44 ft with optional track extensions and features safety mechanisms including dual brake operation and carriage bumpers. Key Features 250 lb lifting capacity Standard...

Heavy-duty steel frame sled with six evenly spaced rollers designed to distribute insulation loads across lightweight roof decks. At 24" frame width and 500 lb load capacity, it helps reduce stress on decking while transporting insulation. Ball bearings at each roller end provide smooth movement across surfaces. Key features: Six rollers spaced 12" apart  Supports up to 500 lb load on roof decks  24" frame width  Ball bearings on each roller end for smooth movement ...

The Winston Group Eagle 3000 Hand Held Heat Gun Compact and lightweight, the EAGLE 3000 simplifies seam bonding in corners, around equipment protrusions, and in other tight, hard-to-weld areas. The unit fits comfortably in your hand. Recessed temperature control knob, booted power switch, and screened air inlet protect the EAGLE 3000 against dirt, damage, and debris. Plus all controls are readily accessible for quick adjustment. Features: Electronic Temperature Control permits precise...

The Van Mark UNL1 UniLeg is a compact, center support leg designed specifically for TrimMaster TM10 and IT10 brakes. Mounted under the middle of the brake, it helps carry the load of long, heavy pieces of trim coil or metal, reducing flex and improving overall stability. Whether you run your TrimMaster on sawhorses, a platform, or a custom bench, the UniLeg adds that crucial third point of contact, helping keep the brake level and bending more accurate over its full 10' 6" length. Tough,...

The Powerblanket Lite PBLG1G is designed to deliver safe, even heating for 1-gallon pails. With a preset internal thermostat set to 145°F (±10°F), it keeps sensitive materials such as resins, coatings, and adhesives warm and ready for use in cold environments. Its lightweight design makes it portable, simple to install, and reliable for job sites and workshops. Key Features: Fits standard 1-gallon pails Preset thermostat maintains 145°F (±10°F) Lightweight, weighing only 1 lb Portable and easy...

The ACRO 12048 Steel Wall Scaffold Bracket is a heavy-duty attachment designed to install over wall sheathing just below eave height, enabling safe and stable walkway staging for tasks like installing trusses, plywood, shingles, fascia, gutters, and under-eave treatments. Constructed from robust steel and finished in powder-coated safety yellow, it incorporates a 3/16" sway brace (swapable for right or left use) and is secured with a 5/8" safety bolt and clip for added stability. Each bracket...

The Rooftop Equipment 40" SuperBead Foam Adhesive Gravity-Driven Applicator is designed for fast, even distribution of foam adhesives on large roofing projects. This gravity-fed applicator dispenses multiple uniform adhesive beads in one pass, minimizing waste and improving installation speed. Built from durable polyethylene and corrosion-resistant materials, the SuperBead Applicator provides excellent chemical resistance and easy cleanup—simply drain unused material or peel cured adhesive...

The ACRO 29908 Roof Bracket is a contractor-grade support bracket set at a 90° angle, featuring an extended 19″ back plate designed for structurally sound 2×8 lumber planks. It includes four offset nail slots—surpassing OSHA’s minimum specification—for secure attachment. Built for robustness, it incorporates a back-stiffening rib and welded gusset to resist twisting and flexing. Smooth, rounded edges safeguard hands and roofing surfaces while allowing shingle-safe installation and removal. The...

Compact and lightweight, the EAGLE 2000-V42MB simplifies seam bonding in corners, around equipment protrusions, and in other tight, hard-to-weld areas. The unit fits comfortably in your hand and is a rugged and powerful heat gun with the heat output to weld modified bitumen details. The EAGLE 2000-V42MB has a 4200 watt heat element and is designed for 230v operation. It is also double insulated and ISO color coded for added electrical safety. ...

OMG OB18WHIP is a 36-inch whip hose designed as a replacement part for the OMG PaceCart3 adhesive dispensing system. It connects between the Vee manifold and the 30-foot material hose, allowing for better flexibility at the gun and fast replacement in case of clogs. Built with Moisture-LOK lining for material purity and rated for high pressure to perform reliably in demanding jobsite conditions. Key Features 36-inch length for good reach and flexibility at the gun Moisture-LOK lining to reduce...

The Powerblanket GCW20 Gas Cylinder Warmer provides a reliable way to keep 20 lb propane and gas cylinders at a stable operating temperature. Using an internal preset thermostat, it maintains contents at approximately 90°F (±10°F), ensuring steady pressure and dependable performance even in freezing conditions. Compact and portable, this warmer is ideal for residential, commercial, and industrial users needing safe and consistent fuel supply. Key Features: Maintains cylinders at about 90°F...

Single Ply Roll Carrier• make easy work of unrolling single ply or moving rolls around jobsite• consists of two double wheeled handles and one 13’ stabilizing tube• the stabilizing tube’s rotating feature permits easy, controlled unrolling and the double wheeled handles allow for easy maneuverability of even the biggest rolls

Kit to refurbish a used RiOn® heat gun to like-new condition using genuine OEM parts. Includes new heating element, mica tube, 10' 14-gauge 120V power cord, motor brushes with springs, air intake filter, and full step-by-step manual. Key features: New heating element included New mica tube for element housing Includes 10' 14-gauge 120V power cord Replacement motor brushes, springs, and air intake filter

Spreads gravel evenly across 36" as quickly as an operator can walkOne simple adjustment sets up gravel flow; one lever provides positive open and close feed controlAdapts to all contemporary graveling applications3 large wheels provide the ultimate in maneuverability and stabilityTubeless pneumatic tires and semi-pneumatic tires make it easy to handleCapacity = 5 1/2 cubic feetHandles Pea Gravel  ...

The Model #25 Big Bucket reduces the number of refills needed to finish the job, with its large 25-gallon capacity. T-bar handle, tubeless pneumatic tires and oilite bushings all add up to time-saving maneuver- ability. Dangerous flash fires are reduced by specially designed wind deflector shield.

The Powerblanket FBW200 Spray Foam Box Warmer ensures that disposable foam boxes maintain the proper temperature for consistent application in cold conditions. With an internal preset thermostat that safely warms up to 90°F, this portable warmer prevents product waste and guarantees spray foam is always ready for use. Designed for convenience and efficiency, the FBW200 is lightweight, easy to handle, and built for reliable performance on job sites.Key Features: Maintains up to 90°F (±10°F)...

Roll of silicone rubber listing tape in dimensions 1" x 1/8" x 30' serves as gasket material for kettle lids, hoods, and decks. Key features: Silicone rubber gasket material in listing tape form Rolls measure 1" width × 1/8" thickness × 30' length Suitable for kettle lids, hoods, and deck gasketing Item number 225-1015

RB-HandWelder is the OMG RhinoBond handheld induction welder made for bonding RhinoBond plates to TPO and PVC membranes where full welders can’t reach—such as under rooftop equipment, at edges, or on vertical surfaces. The tool delivers reliable welds using induction technology, offers adjustable energy settings for different membrane thicknesses, and provides visual and tactile feedback to ensure proper weld cycles. It also comes with magnets for cooling and positioning, and is powered via...

The Rooftop Equipment 14" Bead Gravity-Driven Adhesive Applicator (Mini) delivers precision adhesive application through a simple gravity-feed system. It evenly dispenses four adhesive beads per pass, reducing material waste and labor time. Designed for small or detailed roof areas, this applicator includes adjustable wheels to align with roof deck flutes and a polyethylene tank that allows cured adhesive to peel away easily after use. Built for single-component or pre-mixed adhesives, the...

RBM003 is a set of six Heat Sink Magnets for the OMG RhinoBond system, used immediately after each induction weld to ensure a strong, consistent bond. These magnets transfer heat away from the welded plate to allow proper curing and reduce membrane movement. The polymer body and magnet design are optimized for alignment, heat dissipation, and field durability. Key Features six magnets included so multiple welds can be held down at once made of a proprietary polymer to improve thermal transfer...