Tie Down Engineering TranzSporter TP250 Platform Hoist

The Tie Down TranzSporter TP250 Platform Hoist is engineered for safe and efficient lifting of shingles, insulation, plywood, and rolled goods up to 250 lb. It includes a collapsible aluminum carriage with cam follower tracking, rolled goods and plywood brackets, and motor choices in gas or electric. The system extends up to 44 ft with optional track extensions and features safety mechanisms including dual brake operation and carriage bumpers.

Key Features

• 250 lb lifting capacity
• Standard reach 28 ft, extendable to 44 ft with optional track
• Collapsible carriage with cam bearing tracking system
• Motor options include Lifan gas, Honda gas, or 1.0 hp electric
• Dual band brake system for added safety

• Load capacity: 250 lb
• Standard height: 28 ft
• Extended reach: 44 ft with track extensions
• Motor options: Lifan gas engine (4.0 hp), Honda gas engine, 1.0 hp electric motor (115 V high torque)
• Base track: 4 ft aluminum base with steel support plates
• Track extension sections: 4 ft and 8 ft options
• Carriage: aluminum deck and flap, cam bearing system, carriage bumpers
• Brackets: rolled goods and plywood bracket included
• Brake system: dual band design for smooth stops
• Stability: large cast aluminum feet
• Maintenance: oversized cotter pins for easy drum and belt replacement
• Safety clearance: minimum 10 ft from electrical lines required
• Country of origin: USA
• Warranty: limited warranty (defects in materials and workmanship)

• Place the 4 ft base track section on firm, level ground and prepare all components.
• Assemble the carriage by bolting the platform base, back flap, and support struts, securing with safety pins.
• Slide the carriage onto the track and splice additional track sections if required.
• Feed the hoist cable from the drum through the top pulley and attach to the carriage crossbar.
• Mount the chosen motor (gas or electric) onto the base and connect belts or couplings as directed.
• Attach the rolled goods or plywood bracket and secure materials with tie down straps.
• Operate using the brake pedal or handle, ensuring smooth lifting and controlled stopping.
• Maintain OSHA ladder safety setup requirements and keep a minimum 10 ft clearance from electrical lines.

Q: What is the lifting capacity of the TP250?
A: The TP250 is rated for loads up to 250 lb.

Q: How high can the TP250 reach?
A: It reaches 28 ft standard and can be extended to 44 ft with optional track sections.

Q: What motor options are available?
A: The TP250 comes with Lifan gas, Honda gas, or 1.0 hp electric motor options.

Q: What safety precautions apply during use?
A: Maintain a minimum of 10 ft clearance from electrical lines and use OSHA approved fall protection during setup and operation.

Q: Is the TP250 manufactured in the USA?
A: Yes, the TP250 is manufactured in the United States.