Powerblanket 5 gallon Drum Heater with Rapid Ramp Technology

The Powerblanket BH05 is a 5-gallon drum heater with a fixed internal thermostat set to approximately 100°F. Its full-wrap insulated design distributes heat evenly to eliminate hot and cold spots, keeping contents at the ideal viscosity. Built with a rugged vinyl shell, it is safe for both steel and poly buckets, weather-resistant, and certified to UL and CSA standards.

Key Features:

• Fixed internal thermostat set to 100°F (± 10°F)

• Full-wrap insulated design for uniform heating

• Compatible with both steel and poly buckets

• Rugged vinyl shell rated for outdoor use

• Certified to UL and CSA safety standards

• Fits container size: 5 gallon (19 L)
• Container dimensions: 11.8″ diameter × 15.6″ height (30 cm × 40 cm)
• Thermostat type: Fixed Internal Thermostat (100°F ± 10°F)
• Approximate product temperature: 100°F ± 10°F (38°C ± 5°C)
• Heated dimensions: 47″ L × 16″ W
• Heated area: 5.22 sq ft
• Voltage: 120 V
• Wattage: 120 W
• Amperage: 1.00 A
• Plug type: 15 AMP plug
• Approximate weight: 4 lbs / 2 kg
• Maximum vinyl exposure temperature: 180°F / 80°C
• Minimum vinyl exposure temperature: -15°F / -20°C
• Certifications: UL / CSA

• Place the heater blanket around the 5-gallon bucket or drum, ensuring full surface contact.
• Secure the blanket with cinch straps to hold it firmly in place.
• Plug into a grounded 120 V outlet using the 15 AMP plug.
• The fixed internal thermostat automatically maintains ~100°F; no adjustment is required.
• Periodically check that the heater remains properly secured and operating.
• After use, disconnect power, allow the blanket to cool, clean off debris, and store flat or loosely rolled.

Q: What is the set temperature for the BH05?
A: The fixed internal thermostat maintains about 100°F (± 10°F).

Q: Can the BH05 be used on plastic buckets?
A: Yes, it is safe for both steel and poly 5-gallon buckets.

Q: What certifications does the BH05 carry?
A: It is certified to UL and CSA standards.

Q: What are the power requirements?
A: 120 volts, 120 watts, 1.00 amp, with a 15 AMP plug.

Q: What are the storage and handling guidelines?
A: Unplug after use, allow to cool, clean off debris, and store flat or loosely rolled without sharp folds.