Safety on Clearance

The Tie Down 65087 Hitch Clip is a compact, lightweight roof anchor designed to provide versatile attachment on residential roofs. It uses a keyhole pattern to accept guardrail posts, bunk jacks, and other staging equipment while functioning as a 5,000-lb single anchor point. The product comes ready to install and compatible with wood and metal substrates. Key Features Compact, lightweight powder-coated aluminum designKeyhole pattern supports guardrail posts, staging, and accessoriesRated to...

This roof anchor is designed for permanent installation under wood roof ridge materials and leaves the D-ring exposed for fall-protection equipment attachment. It features a stainless-steel body with a 17″ nailing surface and a 2″ connecting D-ring. The package includes 16D stainless-steel nails for installation to wood structures, and the anchor meets OSHA 1926.502 regulations for fall-arrest anchorage. Key features: 17″ stainless-steel nailing plate designed for installation under roof...

The RS-10 is a compact, stainless steel retrofit anchor designed for fast, watertight installs on new or existing shingle roofs. At 8-1/2" long, it sits over the roofing material and provides a low-profile, single D-ring tie-off for routine access, service work, and permanent protection. Rated to 5,000 lb and compliant with OSHA/ANSI, it’s a rugged, one-person anchorage you can trust at the ridge, hip-ridge, or in the field. Features Built for shingles & retrofits: 8-1/2" length allows...

Ensure safety and compliance on your worksite with Spar-Marathon's Warning Line System. This system is engineered to provide quick setup and reliable protection. Key Features: OSHA Compliant: Meets OSHA Standard 29 CFR 1926.502(f) to ensure workplace safety.Effortless Setup: Designed for quick and easy installation, saving you time and labor costs.Portable and Lightweight: Each stand weighs just 34 lbs., making it easy to transport and set up on site.Flexible Configuration: Recommended spacing...

The SafeWaze FS880 Concrete Anchor Strap is designed for easy and reliable anchorage in concrete applications. Each strap features a sewn-eye loop at one end and a forged-steel D‑ring at the other, connected by abrasion-resistant polyester webbing reinforced with a protective sleeve. These disposable anchorage straps meet ANSI Z359.18 Type A standards and support OSHA-rated lifeline anchorages up to 420 lb, all while maintaining a minimum breaking strength of 5,000 lb. Lightweight and...

This roof anchor is designed for permanent installation under wood roof ridge caps to provide a secure tie-off point for fall-protection systems. It features a 12″ stainless-steel nailing plate and two 2-¼″ plated alloy-steel D-rings. The unit includes 16D stainless-steel nails for installation on wood roof structures and is engineered to meet the requirements for overhead anchorage in wood-roof applications. Key features: Stainless-steel 12″ nailing plate designed for wood roof ridge...

This single-use roof anchor is designed for temporary use on wood roof ridge installations. It features a 6″ × 1½″ bend-in-place nailing plate that allows the user to conform the anchor to roof peaks and includes 16D nails for secure ridge installation. The anchor is constructed of plated carbon steel and includes a ¾″ connecting eye compatible with standard fall-protection equipment. Key features: 6″ × 1½″ bend-in-place nailing plates conform to roof ridges Includes 16D nails for...

The FallTech 5040 Suspension Trauma Relief System is designed to attach to most full-body harnesses, providing relief from suspension trauma by allowing the user to stand and shift in the event of a fall until rescue arrives. It uses an adjustable continuous loop that accommodates both feet, paired thumb-loops for rapid deployment, and reflective webbing for visibility. The two-part UniFit system installs via choke-on snap fasteners and adapts to a wide range of users. Key features: Two-part...

Dynee Mytee is constructed with extra tough HPPE polyethylene fiber for maximum strength combined with minimum weight. If you're looking for a glove that is extremely durable, resistant to moisture, UV light and chemicals, this glove will get the job done. Coated with polyurethane for added protection and a solid grip. Extra Tough HPPE Shell for Maximum Strength Open Back Allows Hands to Breathe Knit Wrist Seals Out Dirt and Particles Excellent Tactile Sensitivity and Dexterity Polyurethane...

The Moveable ARS 2x8 is a permanent, flashed roof anchor designed to mount to 2x8 top chords and stay in place for the life of the roof. It provides a low-profile tie-off point you can position to suit the shingle layout, then seal in with the included flashing kit for a clean, watertight finish. Built for single-person fall arrest or restraint with a 5,000 lb rating, it uses heavy-duty hardware for a rigid, durable connection and a molded stem cover to keep water out and the installation...

Rebar Impalement Protective Cover Adapter (DES-PCA) fits onto DISC-10 or HH-M protective covers to form a saddle that supports double 2×4s, creating a system to safeguard a line of in-line rebar. It meets California Safety Order C-1722-AG and Federal OSHA 701(b). Key features: Compatible with DISC-10 & HH-M protective covers  Forms a saddle to secure double 2×4s over rebar rows  Complies with California Safety Order C-1722-AG  Meets Federal OSHA 701(b) ...

Used for electronics, glass cutting, sheet metal handling, parts assembly, sharp small parts handling, construction, and other general duty applicationsFeatures: Seamless construction offers increased comfort and breathability Dyneema Diamond and Lycra shell is lightweight and provides excellent dexterity, tactile sensitivity, and cut resistancePolyurethane coated palm and fingertips for great abrasion resistance, excellent puncture resistance and outstanding wet/dry gripKnit Wrist helps...

FEATURES: Nose Buds Secure The Glass And Prevent Slipping While Providing A Pillow Soft Fit Strategic Placement Of Lens Insert Is Out Of User’s Direct Line Of Vision Exceeds ANSI Z87.1-2003 High Impact Requirements CE EN166 Certified CAN/CSA Z94.3-07

Replacement 6 Pt. Ratchet Suspension for Pyramex HP161 Cap Style Hard Hats

ANSI TYPE R CLASS 2 Hi-vis lightweight polyester mesh material.2'' silver reflective material.Breakaway hook and loop shoulders, sides, and front closure.Chest pocket with hook and loop closure.Deep and wide inside pocket.Reinforced D-ring slot.2 Pockets: 1 outer, 1 inner

The Malta Dynamics A6318 Adjustable Pitch Roof Anchor is a temporary anchorage connector designed for use on sloped wood roofs during roofing, remodeling, and construction work. The anchor bends over the roof peak or adjusts to match roof pitch, providing a tie-off point for personal fall arrest systems. Constructed from alloy steel, the anchor installs using 16d common nails through pre-punched holes for fast setup on the jobsite. Its removable design allows the anchor to be detached after...

This rebar impalement protection cover fits rebar sizes #7 through #12 and is made of engineered high-impact plastic with a steel reinforcing insert. It conforms to California OSHA #C1718AG and #C1723AG, complies with Federal OSHA 701(b), and features a 16 sq in top surface area for protection while self-centering to rebar. Key features: Fits rebar sizes #7 to #12 Engineered high-impact plastic construction Steel re-enforced insert to seat cover perpendicular to rebar 16 square inch top...

The Tie Down 48586 Corner Ladder Stabilizer enhances ladder safety when working near building corners or flat surfaces by providing extra clearance. The stabilizer offers an 18 in stand-off on flat surfaces, uses lightweight aluminum construction, and includes rubber end caps and mounting hardware. It fits aluminum extension ladders of various duty ratings and helps prevent ladder contact with siding or trim while improving stability. Key Features 18 in stand-off clears ladder from siding,...

ANSI Approved (ANSI/ISEA 107), TYPE R, CLASS 2 Hi-vis lightweight polyester mesh material. 2" silver reflective stripes. Hook and loop closure.

The RACE FS2020 Face Shield w/ Foam Band features a clear PET visor and a hypoallergenic foam forehead strip for comfort. An elastic headband keeps the shield securely in place while accommodating glasses or safety goggles. The lightweight design offers splash protection against fluids and contaminants. Key features: Hypoallergenic foam band absorbs sweat and cushions the forehead Elastic strap provides a secure, adjustable fit Anti-fog PET visor maintains clarity of view Lightweight design...

Blocks sun from your face and neck on job sites lacking other forms of shade. Soft lightweight material.Blocks sun from your face and neck on job sites lacking other forms of shade.Fits on the outside of cap style and full brim hard hats.Shown with Ridgeline hard hat - sold separately.

The 30° angle fixed length, factory engineered Horizontal Lifeline System is for use by 3 workers in fall restraint or 2 in fall arrest. This system is available in a 20’ kit with or without a carry bag. This 3rd party engineered horizontal line kit is a cost-effective way to have multiple workers on the roof with room to move freely. Engineering standards specify that a horizontal lifeline without an energy absorbing device subjected to fall hazards must have a 30° anchors between anchorage...

Heavy-duty 1 3/4" polyester webbing with rugged forged alloy-steel hardware.3" wear pad protects primary webbing from cuts and abrasion.Ideal for I-beams and other properly rated structural members.Economical and lightweight.Can be used repeatedly.Meets the requirements of OSHA 1926 and ANSI Z3591-3/4" load-bearing web with 3" wide full-length wear pad for abrasion resistanceAppropriately sized alloy steel D-rings provide simple pass-through choke-on installation.May be passed-through multiple...

Designed and developed as a breathable cut resistant glove, MaxiCut® combines cut protection with comfort, flexibility and dexterity for dry environments.FEATURESMicro-Foam Nitrile coatings are compatible with light oils and will provide a good grip and excellent abrasion resistanceKnit Wrist helps prevent dirt and debris from entering the gloveInnovative Fibers - Unique high performance yarns and fibers that offer cut protection while maintaining high levels of comfortReinforcement - Between...

This hard hat shade from Pyramex keeps the sun off of your face and neck, helping you avoid sunburn and stay cool. It fits on the outside of most cap style and full brim hard hats. Soft lightweight material.Blocks sun from your face and neck on job sites lacking other forms of shade.Collapses into a circle to fit in pouch.Fits on the outside of full brim hard hats.Shown with Ridgeline hard hat - sold separately.

Used in refrigerated areas, utilities, food processing, commercial fishing, construction, outdoor winter activities and recreation.FEATURESSeamless construction for a comfortable fitAcrylic gloves provide economical cold weather protectionNitrile foam coating provides superior grip in dry, wet and oily applicationsFully coated flat nitrile helps keep hands dry in wet applicationsKnit wrist helps prevent dirt and debris from entering the gloveHi-Vis coloring makes this product very easy to...

Pyramex CNB12PKB Features: Cooling Beaded BandanaPolymer crystal beads provide heat stress relief.Conveniently ties around neck or head.To activate, simply soak in cool water then knead and spread cooling gel for comfortable fit.Reusable just reactivate.Machine washable.One size fits most.

This full body harness is designed for fall arrest applications and features a single dorsal D-ring for connection. It includes five points of adjustment (shoulders, chest, legs), mating-buckle leg and chest closures, paired lanyard parking keepers for managing single- or double-leg lanyards, and heavy-duty polyester webbing. The harness is non-belted, making it suitable for standard fall-arrest use without positioning belt functionality. Key features: Single dorsal D-ring for fall-arrest...

The SafeWaze FS‑FSP9030 Classic Cable Retractable Lifeline features a 30 ft galvanized aircraft steel cable housed in a robust polymer shell with swivel-top attachment. Designed for overhead anchorage (Class A, ANSI Class I), this SRL includes a load‑indicating snap hook and steel carabiner, and integrates an internal shock absorber for fall impact reduction. Ideal for vertical or confined space applications where mobility and fall protection are essential ...

The Malta Dynamics B0002 Harness Shoulder Pads are a comfort-enhancing accessory designed to reduce pressure and friction from full-body fall protection harnesses. Sold as a pair, these padded inserts easily attach to most standard harness shoulder straps, improving wearability for long shifts in construction, roofing, and industrial applications. Ideal for users seeking all-day comfort without sacrificing compliance.  Keywords: Sold as a pair for left and right shoulder strap coverage...

The Guardian Fall Protection 11202 Double-Leg Internal Shock (Tubular) Lanyard is a 6 ft. twin-leg fall arrest solution designed for continuous tie-off and increased mobility. Its tubular webbing conceals the integrated shock absorber, reducing bulk while effectively limiting fall arrest forces. The double-leg configuration provides 100% tie-off, allowing workers to stay connected when transitioning between anchorage points. Constructed with durable polyester tubular webbing and heavy-duty...

The FallTech 7348 Pass-Through Anchor Sling is designed to provide a durable, reusable anchorage connection on properly rated structural members such as I-beams or scaffolding. Built with heavy-duty 1-3/4″ polyester webbing and reinforced with a 3″ wide wear-pad, this 4-foot length sling includes two forged alloy-steel D-rings—a large pass-through D-ring and a smaller connection D-ring—to allow quick wrap/choke installation and attachment of lifelines or SRLs. Rated at 5,000 lb static strength...

The Malta Dynamics Cross Arm Strap is a reusable anchorage connector used to create a temporary fall protection anchor point around a steel beam, structural wood member, or other structure approved by a competent person. It can be used in basket, saddle, or choker configurations and is compatible with ANSI-rated lanyards and self-retracting lifelines. The strap includes a large D-ring and standard D-ring for pass-through installation, along with a heavy-duty wear pad to help protect the...

The MD-C8001 Razorback is a 30-foot self-retracting lifeline made by Malta Dynamics for overhead anchorage applications. It features a galvanized steel cable, aluminum housing, and a swivel top for improved movement without line twist. This unit meets ANSI Z359.14 and OSHA standards for personal fall arrest systems. Key features: 30-foot galvanized steel cable for extended reach Lightweight aluminum housing with integrated carry handle Swivel top connection reduces cable twisting during use...

The SafeWaze FS810 Pro Vertical Retractable Lifeline provides compact, reliable fall protection using a steel cable fall arrest lifeline housed in a durable aluminum casing. Each unit features a stainless steel or galvanized retractable cable with a sealed braking system—designed for vertical ascent, descent, or fall arrest scenarios. With lengths ranging from 6 ft to 20 ft, this series delivers quick deployment, easy retraction, and consistent arrest performance, making it ideal for...

Used for electronics, glass cutting, metal handling, food processing and meat processing.FEATURESSeamless construction offers increased comfort and breathabilityDyneema® & Spandex shell is lightweight and provides excellent dexterity, tactile sensitivity and cut resistancePolyurethane coated palm and fingertips for great abrasion resistance, excellent puncture resistance and outstanding wet/dry gripKnit Wrist helps prevent dirt and debris from entering the gloveCotton color binding denotes...

Fits over most prescription glasses.Lightweight nylon temples adjust for length and pitch.Fits over frames up to 5 3/8" W x 1 3/4" H | 137mm x 44mm.Custom imprinting available.

The SafeWaze FS99280‑E V‑Line Edge-Rated Harness is engineered for safe use near sharp edges and elevated surfaces. It features reinforced webbing through high-wear areas and a built-in edge-protection system along load-bearing seams. Equipped with a dorsal D‑ring, adjustable chest and torso buckles, and contoured shoulder and waist padding, it offers both ANSI and OSHA-compliant fall arrest performance for construction, roofing, and elevated-edge operations.

The Malta Dynamics C5117 Double-Leg Stretch Lanyard provides continuous fall protection with a 100% tie-off design, allowing users to safely remain connected while transitioning between anchor points. This 4.5'–6' stretch lanyard features an internal shock absorber and two large rebar hooks for easy anchorage, plus a snap hook for connecting to the dorsal D-ring of a harness. Ideal for ironworkers, tower climbers, and construction professionals working at height. Keywords: Double-leg design...

Residential Guardrail System meets or exceeds OSHA standards and adjusts from flat roof up to a 16:12 pitch. The package includes one roof bracket, one toeboard bracket, one leg insert, and one upright; it can also be used to catch debris during shingle installation. Key features: Meets or exceeds OSHA standards  Adjustable from flat roof up to 16:12 pitch  Includes: 1 roof bracket, 1 toeboard bracket, 1 leg insert, 1 upright  Can be used to catch debris for removal during...

The Malta Dynamics C7003-G2 Warthog SRL is a 90 ft. Class B self-retracting lifeline designed for vertical fall arrest applications on high-elevation jobs. Built with a durable galvanized steel cable, swivel top connection, and a locking snap hook, this heavy-duty SRL offers smooth retraction, consistent braking performance, and a reliable solution for protecting workers in construction, utilities, and industrial maintenance environments. Keywords: 90 ft. galvanized steel cable for long-range...

The ClearPack 6-Foot Y-Leg Shock Absorbing Lanyard Z07 with Rebar Hooks is designed to limit arrest forces to 900 pounds. This single-leg lanyard for fall arrest features 1-inch polyester webbing with tensile strength of 9,800 pounds. The clear PVC cover protects the shock absorber and allows for easy inspection. This lanyard features anchorage end rebar hooks, while the 5,000 pound mini D-ring reinforces the shock absorber termination on the Y-leg styles. ClearPack Shock Absorbing Lanyards...

This lanyard features elastic leg construction that expands from 4½ to 6 feet, helping reduce tripping hazards while providing flexible movement. It is made with tubular polyester webbing designed to resist abrasion and UV degradation. The full-length internal energy absorber and alloy steel snap hooks at both attachment and anchorage points deliver a low-profile, comfortable fall protection solution. The double-leg design facilitates 100% tie-off for enhanced safety. Key features: Elastic leg...

The SAS-2801 ARS 2×8 is a permanent stainless steel roof anchor designed for residential fall protection applications. It installs to 2×4, 2×6, or 2×8 rafters and can be drill-through mounted on 2×10 or 2×12 members. Each anchor includes a TPE flashing and stem cover to integrate with asphalt shingle or wood shake roofing while maintaining a watertight seal. Features Permanent fall protection roof anchor Stainless steel construction, 5,000 lb minimum strength Supports 2×4, 2×6, 2×8 rafters;...

NRR 27dB | SNR 30.4dBSoft foam ear cups.Height adjustment to fit most.Fold-away, padded headIndividually packaged.

A tough, 72-inch webbing anchor strap that creates a fast, reliable tie-off point around beams, trusses, columns, or other approved structures. One end features a forged D-ring for easy clipping; the other end is a reinforced loop that cinches cleanly without bulky hardware. Built for everyday jobsite abuse, it integrates into standard PFAS setups for a single user and stows compactly when the task is done. Features 72 in length provides generous wrap/anchorage options on wood, steel, or...

The Guardian Fall Protection 01605 Rebar Positioning Device is designed to provide workers with a safe and reliable means of connecting to rebar structures while performing elevated tasks. Constructed from high-strength alloy steel, this device ensures durability in demanding jobsite environments. It is engineered for use in positioning applications, allowing workers to maintain stability and secure tie-off while working hands-free on vertical rebar assemblies. Lightweight and easy to connect,...

Passive Earmuff.NRR 25dB | SNR 30dBLow profile design.Soft foam ear cups.Fold-away, padded headband.Individually packaged.