Specials

The 5 ft × 5 ft heavy duty flame-retardant drain tarp (Item #329-DT-V N-0505) from Big Rock Supply is crafted to divert overhead leaks in roofing and interior settings. Made from flame-retardant laminated polyester, it features a built-in drain spout that accepts a standard ¾″ garden hose, and heavy D-rings sewn into each corner for easy hanging and anchoring. Key features: Built-in drain spout accepts standard ¾″ garden hose to channel leak water safely away.  Heavy duty D-rings sewn...

This roof anchor is designed for permanent installation under wood roof ridge caps to provide a secure tie-off point for fall-protection systems. It features a 12″ stainless-steel nailing plate and two 2-¼″ plated alloy-steel D-rings. The unit includes 16D stainless-steel nails for installation on wood roof structures and is engineered to meet the requirements for overhead anchorage in wood-roof applications. Key features: Stainless-steel 12″ nailing plate designed for wood roof ridge...

The Zurn Z121 roof drain features a 12-inch diameter Dura-coated cast iron body with a combination membrane flashing clamp and gravel guard. It can be specified with a low silhouette cast iron dome (variant Z121-CD), a matching clamping ring (Z121-CC), or a topside install Top-Set deck plate (Z121-DP). Key Features 12-inch diameter Dura-coated cast iron body Combination membrane flashing clamp and gravel guard Cast iron dome variant (Z121-CD) Clamping ring available (Z121-CC) Top-Set deck...

The Zurn Z100 roof drain features a 15-inch diameter Dura-coated cast iron body paired with a poly dome for rooftop drainage. It includes a combination membrane flashing clamp and gravel guard, with availability in multiple pipe sizes and outlet connections. Key Features 15-inch diameter Dura-coated cast iron body Combination membrane flashing clamp and gravel guard Poly dome for rooftop drainage Available in 2, 3, 4, 5, 6, and 8 inch pipe sizes Outlet options include No-Hub, Inside Caulk, and...

SureBond SB-190 is the official snow guard adhesive of SnoBlox-Snojax. We pioneered the use of this adhesive with our polycarbonate snow guards over 25 years ago and now it has become the standard in the industry. For a successful installation the adhesive requires 28 days or (672 Hours) at 50 Degrees (F) or above to achieve full cure. Temperatures below 40 Degrees (F) will delay cure time, until temperatures reach 50 Degrees (F) or above to completely cure. Spring, Summer or early Fall is the...

Everhard MR02153 Wrist-Saver Steel Radius Seam Roller — 2" x 2" The MR02153 combines Everhard’s Wrist-Saver offset geometry with a 2" x 2" polished steel radius roller to deliver high, even pressure without edge marking. The radius profile helps the roller glide over laps, transitions, and step-downs while the offset frame improves line-of-sight and keeps your wrist in a more neutral position. Enclosed bearings and a cushioned handle give you smooth, controlled tracking for long runs and...

The Malco S2R 3" Hand Seamer is a compact sheet metal forming tool designed for bending, folding, flattening, and straightening metal edges in roofing, HVAC, and fabrication applications. Its narrow jaw width provides precise control for detail work and short, targeted bends where larger seamers are less practical. Key Features 3" forged steel jaws for precise, controlled formingDrop-forged, high-impact jaws for strength and durabilityDepth markings in 1/4" increments up to ~1-1/4" for...

The Wade 3108 Flashing Ring is a cast iron accessory designed to seal roof membranes to Wade roof drain assemblies. It offers a secure, watertight fit that helps prevent leaks at critical drainage points, making it ideal for demanding commercial, industrial, and institutional roofing applications. Key Features: • Cast iron construction for durability • Provides watertight seal with roof membrane • Compatible with Wade drain bodies and domes • Built for commercial and industrial roof systems ...

The Van Mark IT10-S Mark IV Industrial TrimMaster is a 10' 6" heavy-duty siding and metal roofing brake built for demanding commercial and industrial jobsites. With its POWERlock™ bar, POWERslot™ hinge, and 14" throat depth, it delivers crisp, consistent bends in aluminum, galvanized and painted steel, copper, zinc, and more. The included Xtreme Stand™ keeps the brake rock-solid while still staying portable, so one installer can set up, operate, and move it as needed. From roof flashings and...

The 30° angle fixed length, factory engineered Horizontal Lifeline System is for use by 3 workers in fall restraint or 2 in fall arrest. This system is available in a 20’ kit with or without a carry bag. This 3rd party engineered horizontal line kit is a cost-effective way to have multiple workers on the roof with room to move freely. Engineering standards specify that a horizontal lifeline without an energy absorbing device subjected to fall hazards must have a 30° anchors between anchorage...

The Marathon BS-104 Adjustable Drain Guard is a 10-inch dome-style guard engineered to keep debris from clogging roof drains. Constructed of corrosion-resistant aluminum, it provides both durability and lightweight performance. With a 10″ (254 mm) outside diameter and 13″ (330 mm) overall length, this adjustable guard offers a secure fit and long-lasting protection for commercial and industrial roof drainage systems. Key Features: 10″ adjustable aluminum drain guard Dimensions: 10″ OD × 13″...

The SCUPRD3, SCUPRD4, SCUPRD5, and SCUPRD6 models are part of OMG’s Scupper Thru-Wall RetroDrain product line. Designed to replace existing through-wall or side-wall drains in re-roofing applications, these drains provide a secure and watertight solution without requiring removal of existing plumbing. They feature a durable aluminum body, stainless steel hardware, a large pre-punched flange for flashing integration, and the proven U-Flow mechanical seal to connect securely to PVC or cast iron...

The Rooftop Equipment V-PR-YK Premium V-Manifold 2-Part Adhesive Applicator with Yoke is designed for professional roofing contractors who demand performance, precision, and durability. Its straight flow path reduces clogging while allowing quick and simple cleanout between jobs. Constructed from anodized aluminum, the V-PR-YK combines rugged strength with lightweight handling. The included yoke enables simultaneous valve operation for balanced adhesive delivery, and the foam cuff handle...

The Zurn Z125 roof drain features an 8-3/8 inch diameter Dura-coated cast iron body with a combination membrane flashing clamp and gravel guard. It comes standard with a low silhouette poly dome, and can be specified with a cast iron dome (Z125-CD), a clamping collar (Z125-CC), or a Top-Set deck plate with dome (Z125-DP). Key Features 8-3/8 inch diameter cast iron body Combination membrane flashing clamp with gravel guard Variant options: cast iron dome (Z125-CD), clamping collar (Z125-CC),...

This 7 ft × 7 ft heavy-duty flame-retardant drain tarp (Item #329-DT-VN-0707) from Big Rock Supply is designed to protect personnel and equipment from overhead leaks. It is made of flame-retardant laminated polyester, features a drain spout compatible with a standard ¾″ garden hose, and has heavy D-rings sewn into each corner for hanging. Key features: Built-in drain spout connects to a standard ¾″ garden hose to divert water safely away.  Heavy D-rings sewn into each corner for secure...

Keep warm with the Nordic Blaze 3-in-1 Balaclava. Made from premium 100% polyester polar fleece, the RWL26 balaclava provides superior warmth and flexibility. Its two-piece design using detachable hook and loop offers added functionality because you can wear it three ways: as a full face mask, neck gaiter, or beanie. The long length covers the nose, mouth, and neck and conveniently tucks into your jacket. Plus, the attachment straps can be secured to hard hat suspensions for enhanced...

The RACE Rail Skylight Safety Kit is a non-penetrating adjustable system that guards skylights while preserving access to surrounding roof areas. It installs in just minutes and accommodates skylights from 36″ × 36″ to 60″ × 60″. An optional extension pack allows coverage for skylights up to 48″ × 96″. Key features: Non-penetrating design maintains roof integrity Adjustable to fit skylights from 36″×36″ to 60″×60″ Installs quickly for minimal disruption Includes 4 legs, 8 adjustable rails, 8...

Primegrip offers an extensive line of steel membrane seam rollers in a wide variety of sizes. The specially designed outer edge of the roller barrel is rounded (""radiused"") to allow for easy turning and sealing in tight spaces. FEATURES Heavy duty steel seam rollerUsed to compress roof membranes when effecting seal/jointSingle fork with high quality bearings2" diameter x 2" widthRadiused outside edge allows for easy turning and sealing in tight spacesBirch wood handle ...

The Josam 414 High Hat Cast Iron Dome is constructed from cast iron with a green finish and is designed for compatibility with specific Josam roof drain bodies. It features an approximate outside diameter of 8-¼ inches and an approximate height of 11-½ inches. The dome design helps screen debris while maintaining drainage capacity in compatible roofing systems. Key Features Material: cast iron Outside diameter: approximately 8-¼ inches Height: approximately 11-½ inches Color: green High-hat...

The SafeWaze FrogLink Temporary Roof Anchor (019‑4006) is a robust, re‑usable anchorage device engineered for safe single‑person or horizontal lifeline fall protection on wood roofing. It features a 360° anchor ring, an integrated energy absorber, and includes all necessary hardware for installation. Designed for temporary setups and mobile crews, this anchor allows secure fall arrest while meeting OSHA and ANSI safety standards.

The Malco AV3 Combo Cut Aviation Snip is a versatile aviation-style snip designed for straight cuts and slight curves in either direction. Unlike dedicated left- or right-cut snips, the AV3 combines multi-direction cutting capability with forged steel jaws and ergonomic POWER-FIT grips for controlled cutting across a variety of sheet metal applications. Key Features Combo-cut design for straight cuts plus slight left and right curvesHardened forged steel jaws for long-lasting cutting...

Primegrip offers an extensive line of silicone and steel membrane seam rollers in a wide variety of sizes. FEATURES Heavy duty steel seam rollerUsed to compress roof membranes when effecting seal/jointSingle fork with solid double brass bearings (sealed) for immense smoothness, durability and minimum hand fatigue2" diameter x 2" width5" birch wood handle

The Metal Plus Universal Safety Anchor (USA) is a non-penetrating fall-protection anchor engineered specifically for standing seam metal roofs. Using an innovative hinge and clamp design, it delivers a secure tie-off point without gouging panels, voiding warranties, or leaving rust marks behind. Built from high-quality aluminum and stainless steel, the USA anchor installs in under a minute and provides a reliable attachment point for a single user or as part of a larger fall-arrest system....

Dynee Mytee is constructed with extra tough HPPE polyethylene fiber for maximum strength combined with minimum weight. If you're looking for a glove that is extremely durable, resistant to moisture, UV light and chemicals, this glove will get the job done. Coated with polyurethane for added protection and a solid grip. Extra Tough HPPE Shell for Maximum Strength Open Back Allows Hands to Breathe Knit Wrist Seals Out Dirt and Particles Excellent Tactile Sensitivity and Dexterity Polyurethane...

CitraSolv Orange Supreme is a heavy duty degreaser in aerosol form using natural citrus solvents. It is capable of removing grease, oils, gaskets, protective coatings, and other residues. The formula excludes fluorocarbon propellants and chlorinated solvents and leaves a citrus fragrance while being rinsable with water. Key features: Uses natural citrus solvent (d-limonene) No fluorocarbon propellants or chlorinated solvents Rinses with water Effective on asphalt, tar, coatings, and grease...

The Billy Goat F602 Series Force Blowers are 30% lighter than steel models, with the F602V (89 lbs) and F602X (83 lbs) offering easy maneuverability. Their rounded composite housings and 16-blade fan technology enhance blowing efficiency, reduce noise, and prevent rust or dents. Powered by a 169cc Vanguard engine (F602V) or 208cc Briggs & Stratton engine (F602X), these blowers provide reliable performance and durability. Patented Aim-N-Shoot technology delivers precise airflow control, while...

The RS-10 is a compact, stainless steel retrofit anchor designed for fast, watertight installs on new or existing shingle roofs. At 8-1/2" long, it sits over the roofing material and provides a low-profile, single D-ring tie-off for routine access, service work, and permanent protection. Rated to 5,000 lb and compliant with OSHA/ANSI, it’s a rugged, one-person anchorage you can trust at the ridge, hip-ridge, or in the field. Features Built for shingles & retrofits: 8-1/2" length allows...

Primegrip offers an extensive line of silicone and steel membrane seam rollers in a wide variety of sizes. FEATURES This professional seam roller has two silicone rollers mounted on two single forksIt allows application of equal, uniform pressure for more precise hand welding along profile1" diameter x 1¼" width (each roller)The 5" hardwood handle and enclosed bearings provide balance and smooth rolling action

Heavy-duty 1 3/4" polyester webbing with rugged forged alloy-steel hardware.3" wear pad protects primary webbing from cuts and abrasion.Ideal for I-beams and other properly rated structural members.Economical and lightweight.Can be used repeatedly.Meets the requirements of OSHA 1926 and ANSI Z3591-3/4" load-bearing web with 3" wide full-length wear pad for abrasion resistanceAppropriately sized alloy steel D-rings provide simple pass-through choke-on installation.May be passed-through multiple...

Used for electronics, glass cutting, sheet metal handling, parts assembly, sharp small parts handling, construction, and other general duty applicationsFeatures: Seamless construction offers increased comfort and breathability Dyneema Diamond and Lycra shell is lightweight and provides excellent dexterity, tactile sensitivity, and cut resistancePolyurethane coated palm and fingertips for great abrasion resistance, excellent puncture resistance and outstanding wet/dry gripKnit Wrist helps...

The Powerblanket Lite PBL20 is designed to maintain consistent propane performance for 20-pound cylinders, even in freezing temperatures. Using an internal preset thermostat at 90°F, it prevents vapor pressure loss, ensuring reliable fuel flow during cold-weather use. The lightweight, portable design makes it ideal for residential grilling, camping, and light commercial applications where dependable propane efficiency is essential. Key Features: Designed for 20-pound propane tanks Internal...

The Midwest Snips 6716B Bulldog / Notch Cut Snips are hand-operated cutting snips designed for notch pattern cutting and straight cuts in sheet metal. They feature serrated forged aviation snip blades that help maintain grip and control on materials during cutting. The snips are intended to cut up to 24 ga cold rolled steel and 22 ga stainless steel, making them suitable for HVAC, ductwork, and general sheet metal cutting tasks. The tool is designed for precise control and versatility. Key...

Metal Plus LLC brackets are essential tools in the roofing industry, designed to provide safety, efficiency, and versatility during the installation of standing seam metal roofs. Their unique patented design makes the bracket easy to use and their non-penetrating designs with the rubber pads to prevent scratching on metal roof panels make them an indispensable asset for roofing professionals. These brackets are especially effective for both mechanical standing seam and snap lock standing seam...

DualGard is a robust two-pipe snow guard system by S-5! designed for use on standing seam and corrugated metal roofs. It uses 1-inch diameter aluminum crossmembers (DualPipe) mounted via DualBrackets and S-5! Mini clamps or CorruBracket attachments. Optional DualClip components may be added under certain conditions to retard snow/ice migration under the bars. The system includes splices, collars, and endcaps for continuous pipe runs. It can be powder-coated or anodized to match roof finishes....

The S-5! DualPipe is the aluminum crosspipe component used in DualGard and VersaGard snow retention systems. It features a 1-inch diameter with a 1/8-inch wall for structural strength, and is engineered to integrate seamlessly with S-5! brackets, clamps, and hardware to create a durable, two-pipe snow guard assembly for metal roofs. Key Features: • 1" diameter aluminum pipe with 1/8" wall thickness • Supplied in 7' 8" (DualGard) or 8' (VersaGard) lengths • Engineered for use with S-5! DualGard...

Replacement 6 Pt. Ratchet Suspension for Pyramex HP161 Cap Style Hard Hats

The 7 ft × 7 ft LD (light duty) drain tarp from Big Rock Supply (Item #329-DT-PC-0707) is designed for quick response or preventive leak diversion under roofs, ceilings or overhead pipe leaks. It features a drain spout that connects to a standard ¾″ garden hose to channel water safely away from personnel and equipment. The material is 12-mil reinforced polyethylene and the tarp is not flame retardant. Heavy D-rings are sewn into each corner for hanging; for sizes larger than 10′×10′ D-rings...

The Van Mark USA1 UniStand is a heavy-duty support stand designed specifically for TrimMaster TM10 and IT10 brakes. Built from rugged steel with an adjustable, wide-stance frame, it gives your brake a solid, level base so you’re not relying on wobbly sawhorses or makeshift supports. The UniStand lets you set a comfortable working height, improves stability when bending long pieces of trim coil or metal, and breaks down into manageable sections for easy transport between jobsites—perfect for...

This 12 ft × 12 ft light-duty drain tarp (Item #329-DT-PC-1212) offers a rapid-response solution to protect personnel and equipment from roof or ceiling leaks. It incorporates a drain spout compatible with a standard ¾″ garden hose to channel water away, and heavy D-rings sewn into each corner for secure anchoring; since the size exceeds 10′×10′, it also includes D-rings on the center of each side. Key features: Drain spout connects to a standard ¾″ garden hose for safe water diversion. Heavy...

The 15 ft × 15 ft light-duty drain tarp (Item #329-DT-PC-1515) is built to protect personnel and equipment from overhead leaks. It includes a built-in drain spout that connects to a standard ¾″ garden hose to redirect water, heavy D-rings sewn into each corner, and additional D-rings on the center of each side (because size exceeds 10′×10′). Key features: Drain spout connects to a standard ¾″ garden hose for safe water diversion. Heavy D-rings sewn into each corner and on the center of each...

Built for control and comfort, the MT14020 pairs Everhard’s flat, precision jaws with a cushioned, non-slip handle that keeps your hands fresh through repetitive forming. It distributes pressure evenly for crisp bends, tight hems, and seam-flattening on trim, flashing, and duct details—delivering shop-quality results on the jobsite. Key Features Cushion-grip handles reduce hand fatigue and provide confident, non-slip control—gloved or bare-handed. Wide, flat jaws spread force evenly for...

This Honda-powered blower is a top choice for full-size landscapers, seal coaters, parks departments, cemeteries, resorts, street departments, and golf courses. Its Patented Aim N Shoot™ technology allows you to direct airflow precisely with fingertip control, and it’s lockable for consistent use. The 16-blade closed-face fan delivers twice the airflow of other models, while the F13 smooth housing ensures quiet, powerful performance that won’t rust or dent, backed by a 5-year warranty....

The Malco GOTRC Gutter Outlet Punch Replacement Chocks are replacement components designed for use with Malco gutter outlet punch tools. These internal chocks work within the tool’s drive mechanism to maintain proper grip and motion during punching operations, helping ensure consistent cutting performance and reducing slippage during use. Key Features Replacement chocks for Malco gutter outlet punch toolsRestore proper function of the punch drive mechanismHelp prevent slipping during punching...

The Powerblanket PBL55F is a full-coverage drum heater that wraps entirely around 55-gallon steel or poly drums to maintain material temperature under cold conditions. With a fixed preset thermostat set for up to 145°F (±5°F / ±3°C), it delivers reliable warmth while protecting sensitive contents from freezing or thickening. Built with durable vinyl and insulated wrap design, it offers consistent performance, simple setup, and year-round utility. Key Features: Full-coverage insulated wrap for...

This 10 ft × 10 ft heavy-duty flame-retardant drain tarp (Item #329-DT-VN-1010) is designed to protect personnel and equipment from overhead leaks. It features a drain spout that connects to a standard ¾″ garden hose and heavy D-rings sewn into each corner for easy hanging. Key features: Drain spout connects to a standard ¾″ garden hose for water diversion.  Heavy duty construction and flame-retardant design.  Heavy D-rings sewn into each corner for secure hanging.  Size: 10 ft...

MiraCool hard hat pads from Occunomix provide a great way for workers to reduce heat stress in outdoor and other high-heat environments. Just soak the pads in cold water for 10-20 minutes, and the cooling crystals activate, staying hydrated for anywhere from 4 hours to several days, depending on conditions. The soft pad provides added comfort on the top of the head, while the super-absorbent cooling crystals retain moisture to keep the wearer cool all day long. Provide a great way for workers...

The Marathon Cast Iron Roof Drain Kit, also known as the Cast Pak, is built from heavy-duty cast iron to provide long-lasting durability and watertight performance. Each kit includes a cast iron drain body, clamp ring, and strainer. Available in 3″, 4″, 6″, and 8″ outlet sizes, the Cast Pak is designed for reroof and retrofit applications where strength and reliability are essential. Key Features: Available in 3″, 4″, 6″, and 8″ outlet sizes Rugged cast iron construction for maximum durability...

The Albion R6B is a rugged 1/10-gallon (10 oz) manual cartridge gun built for daily jobsite use with common construction sealants and adhesives. Its 6:1 ratchet-rod drive delivers reliable output for standard-viscosity materials, while the metal half-barrel carriage speeds loading and keeps the nozzle in view for precise bead control. A built-in puncture wire helps open the cartridge seal quickly, the integrated ladder hook simplifies staging between runs, and the rigid frame maintains plunger...