Fall Protection

The RCCS-36 RaptorRail Parapet Clamp Crate provides a bulk set of guardrail clamps for building temporary, non-penetrating rooftop guardrail runs. It includes 36 RB-01-RC-CF-000 clamps packaged in a single crate for organized transport and storage. Designed for use with the RaptorRail system, each clamp secures posts and rails to parapet walls for OSHA-compliant perimeter protection. Key Features Includes 36 RaptorRail parapet clamps for large layouts Non-penetrating clamp design for rooftop...

The 6151 series deluxe harness with tool bags is a full-body fall protection harness built for roofing, framing, and construction trades, integrating tool storage and comfort. It features padded straps, a 16-grommet utility belt, quick-connect buckles, and supports All-Pakka tool bags plus hammer holder. The harness is sized from small (GHS) up to X-large (GHX) and is rated for fall arrest and restraint with a maximum user capacity of 340 lb. Key Features Full-body harness integrated with tool...

The FallTech 4-Person Temporary Rope Horizontal Lifeline Systems are engineered for quick installation and multi-user fall-protection across spans. Each system includes a 5/8″ double-braid polyester rope lifeline with steel thimble and stitched end-termination, a line tensioner with integral energy absorber and anchorage-end carabiner, four connecting rings, two heavy-duty pass-through anchor straps and an 18″ gear bag for transport. The systems are rated for up to four users simultaneously...

The SafeWaze FS-FSP1411-W series is a 20’ retractable vertical lifeline designed for reliable fall protection in vertical climbing or positioning applications. Built with durable 7/32" galvanized steel cable and equipped with an energy-absorbing system, this SRL is ideal for job sites requiring vertical mobility with secure anchorage. The unit features a robust braking mechanism and is available with either a snap hook or a rebar hook connector to suit different attachment needs. ...

The FallTech 8143 FT-Iron 1D Standard Non-Belted Full Body Harness is designed for general industry and construction fall-arrest use. It features a non-belted design, tongue-buckle leg adjustments with nine grommet positions, a reinforced sub-pelvic strap with wear pad for long service life, and a slip-resistant ArrowGrip dorsal D-ring plate for improved comfort and connection stability. The harness uses durable polyester webbing and is compliant with ANSI Z359.11-2021 standards. Key features:...

The Guardian Fall Protection 10910 Halo SRL is a 20 ft. self-retracting lifeline featuring a rugged 3/16 in. galvanized steel cable for reliable fall arrest protection. Part of the trusted Halo SRL series, the 10910 combines strength, lightweight construction, and ergonomic design. The impact-resistant polymer housing includes a built-in carry handle for portability, while the swivel top ensures smooth mobility and reduces cable twisting. An internal braking system delivers controlled...

The SafeWaze Latitude Pro Arc Flash 7′ Single Web SRL‑P brings ANSI and OSHA-certified overhead fall protection to high-heat environments. Featuring Kevlar® flame-resistant webbing, a translucent side-payout housing for visual inspection, and a sealed internal braking system, each unit offers reliable fall arrest without relying on external shock packs. Equipped with a 9013 Behind‑the‑Web mounting bracket and swivel top carabiner, this Class I SRL is available with four connector options:...

The SafeWaze FS595 PRO 6′ Stretch Internal Energy Absorbing Lanyard is designed to minimize trip hazards while enhancing mobility on site. It stretches from 4 ft (stowed) to 6 ft (extended) and features elasticized tubular webbing with an internal energy absorber—no external shock pack—making it lightweight and low profile. One end connects via a forged steel snap hook (to the harness), and the other features a forged steel rebar hook for secure anchorage. ...

The Super Anchor 4015 and 4015-V are prussic-style rope grabs designed for use with 5/8 inch vertical lifelines. Both models lock bi-directionally when loaded, providing secure fall arrest and restraint capability. The 4015 features a deluxe build for extended service, while the 4015-V offers a simplified value version for cost-effective applications. Features Prussic-style rope grab for 5/8 inch vertical lifelines Bi-directional locking for fall arrest Compatible with Super Anchor lifelines...

The SafeWaze Latitude Pro Leading‑Edge 11′ Dual‑Leg SRL‑P LE is engineered for leading-edge fall protection environments. Featuring 11 ft of ultrahigh molecular weight webbing (dual-leg style) and a translucent housing for internal inspections, it includes a sealed centrifugal braking system that requires no external shock pack. Equipped with a steel swivel carabiner anchored to a dedicated leading-edge bracket, it supports continuous dual‑leg tie‑off. Available connector options include steel...

The FallTech 727620LE Contractor Leading Edge SRL is designed for use on unprotected sides and edges. It features a 20-foot 7/32-inch galvanized steel cable lifeline for added cut resistance, an internal inertial braking system, and an external ViewPack® energy absorber for enhanced safety at leading edges. The glass-filled nylon housing includes an integrated hand-grip for ease of connection. This device carries a Class 2 SRL rating and meetsANSI Z359.14-2021 and OSHA standards for leading...

The Guardian Fall Protection CR5 Class 1 Dual-Leg Self-Retracting Lifeline is engineered for mobility and continuous fall protection with 100% tie-off capability. Featuring two 6-foot polyester web lifelines, this SRL allows workers to stay securely tied off while moving between anchor points. A lightweight, impact-modified thermoplastic housing and a 360° swivel top provide durability and freedom of movement, while reinforced webbing guides extend service life. Integrated fall clearance...

The FallTech 7446 Removable Concrete Anchor is designed for temporary anchorage in cured concrete walls and ceilings where reuse is required. With a forged O-ring connection point and full 360° swivel orientation, it installs into a pre-drilled hole (minimum 4-1/2″ depth, maximum 1″ diameter) and is assembled with galvanized and stainless-steel components. Suitable for use with horizontal lifeline (HLL) systems, the anchor has a static strength rating of 6,000 lb minimum. Key features: Forged...

This spreader assembly is designed for use in work-positioning by providing dual hook attachment to the user’s hip D-rings. It features an integral captive-pin carabiner for user-supplied positioning hook connection. The plated alloy steel hooks and carabiner are rated for high static strength to support stable, hands-free work positioning at heights. Key features: Dual-gate hook attaches to user’s hip D-rings for work-positioning applications Integral captive-pin carabiner connects to...

The Guardian Fall Protection 10710 Concrete Anchor Strap provides a reliable anchorage solution for concrete formwork applications. Measuring 3 feet in length, this durable webbing strap features a loop on one end and a D-ring on the other, offering secure and versatile tie-off points. Designed for temporary anchorage, the 10710 can be easily positioned around rebar or other suitable concrete structures. Its compact, lightweight design makes it portable and convenient for a wide range of...

This belted full body harness is built for demanding job site applications, featuring plated alloy steel hardware, a padded shoulder yoke, hip-to-seat leg pads, and a 6-inch waist support positioning pad. It includes dorsal and hip D-rings as well as a quick-connect chest buckle and tongue-buckle leg closures with nine grommeted adjustment positions to ensure a secure fit in large body sizes. The harness also supports the addition of personal self-retracting lifelines (SRLs) via a proprietary...

The Ultra‑Safe Red Dragon RD‑HN50‑SRL is a heavy‑duty, 50‑foot Class 2 galvanized steel cable self‑retracting lifeline engineered for extreme-reaching fall protection needs. Built to ANSI Z359.14‑2021 standards, it features impact-resistant housing, a speed‑sensitive braking system, and load-indicating connectors. Ideal for construction, high‑rise maintenance, utility, and industrial work, it delivers smooth retractability and robust fall protection over extended reach while minimizing slack...

The Guardian Fall Protection 21056 Cyclone Reflective Harness (Size S) is a high-visibility full body harness designed for enhanced safety in low-light environments. Built with durable polyester webbing and reflective stitching, it combines comfort, adjustability, and visibility for workers on construction sites, roadwork projects, and industrial applications. The Cyclone design includes multiple points of adjustment, quick-connect buckles, and a dorsal D-ring for fall arrest, ensuring both...

The Guardian CR5 Class 1 Web Self-Retracting Lifeline (SRL) is a robust, lightweight fall arrest device engineered for both fall arrest and travel restraint. Built with an impact-modified thermoplastic housing, radar-strong lifeline guidance, and a 360° swivel top to reduce snags, the CR5 enhances on-the-job mobility and safety. It offers multiple hook options — steel or aluminum, snap or rebar — to suit varied anchorage needs. Integrated fall clearance charts on the shock pack, digitally...

The Tie Down 72833 PX5 Sentinel Penetrating Mobile Fall Protection System provides maximum rooftop safety for multiple users with a single cart. It protects seven workers at once, five in fall arrest and two in fall restraint, making it the largest capacity mobile fall protection system in its class. The PX5 weighs approximately 1,285 lb and includes a locking toolbox, front locking tow handle, forklift pockets, lifting rings, and a rolled goods rack. It ships jobsite ready and is engineered...

The FallTech DuraTech Mini 6 ft Twin-Leg Personal SRL-P (model 72706TB3) is a compact fall-arrest self-retracting lifeline designed for dual-leg continuous tie-off. It features a long-wearing Dyneema®/polyester blend web lifeline, steel rebar hook anchorage connectors, a steel dorsal connecting carabiner with alignment clip and dual leg configuration. It allows anchorage up to five feet below the dorsal D-ring without edge hazard for users weighing up to 310 lb maximum. The device meets...

The Guardian Fall Protection 00360 D-Ring 2-Hole Anchor Plate is a compact and durable anchorage connector designed for fall protection systems. With a simple two-hole mounting design, it provides a secure attachment point for personal fall arrest equipment on wood, metal, or concrete structures. Constructed from high-strength steel, this anchor plate ensures reliability and long-term performance in demanding environments. Lightweight and easy to install, the Guardian 00360 is suitable for...

The FallTech CTX cable Class 2 leading edge personal SRL-P series provides compact, ergonomic fall protection for edge-exposed applications. Each 8 ft single-leg unit uses a 3/16 inch galvanized steel cable lifeline, engineered for Class 2 leading edge performance and below D-ring tie-off up to five feet. An energy absorber cover includes fall clearance charts and tables, while the internal mechanism is designed to minimize unintentional lockups and keep workers moving productively. All models...

The SafetyGator SG-000-09 from Leading Edge Safety is a full-featured mobile fall restraint system designed for steep-slope and residential roofing tasks. It includes a 145-gallon tank that fills with water, eliminating the need for external counterweights, and is rated to support fall restraint for up to six workers. Equipped with six tie-off points and a ridge lifeline guide, it offers reliable safety and mobility with flat-free tires and quick setup. Key Features Water-filled tank holding...

The FallTech 7451AC Rotating D-Ring Anchor, Without Fasteners, provides a high-quality anchorage option for steel or cured concrete installations where user-supplied fasteners are used. It features a stainless-steel anchoring plate, a plated alloy-steel connecting D-ring with full 360° rotation via a precision-cut bushing, and is designed for both temporary and permanent installation. The anchor plate and D-ring assembly are reusable to support multiple onsite setups. Key features:...

The Guardian Fall Protection 10715 Concrete Anchor Strap is a versatile and reliable anchorage connector designed for use with concrete formwork and rebar applications. At 4 feet long, this durable webbing strap includes a loop on one end and a steel D-ring on the other, offering a secure tie-off point for fall protection systems. Built from high-strength polyester webbing, the 10715 is lightweight, portable, and reusable for temporary applications. It is OSHA and ANSI compliant, ensuring...

The RR-CS-350 Raptor Combo Guardrail System provides 350 feet of OSHA-compliant, non-penetrating perimeter protection. This all-in-one kit includes uprights, fixed rails, adjustable rails, corners, and a job box for organized transport and storage. Engineered by Leading Edge Safety, it adapts to a wide range of roof conditions while ensuring fast installation and reliable fall protection. Key Features Complete 350 ft rooftop guardrail system in one package Includes uprights, fixed rails,...

The FallTech 770001 Temporary Rope HLL System is a portable horizontal lifeline kit designed for two workers sharing a 100-foot span. The system uses a 5/8-inch low-stretch hollow-core polyester rope with a braided and thimbled end-termination. Included are plated steel hardware such as a line tensioner and two installation carabiners, plus two pass-through anchors and two connecting rings. Ideal for temporary installation, this system supports mobility across a work span while providing a...

This self-retracting lifeline is engineered for leading-edge hazard environments. It features a 7/32″ galvanized steel cable lifeline, aluminum housing, load-indicating swivel snap hook, and an internal inertial braking system with dual disc brakes. The unit meets Class 2 leading-edge requirements for applications where the lifeline may pass over or engage sharp edges. Key features: 7/32″ galvanized steel cable lifeline Load-indicating swivel snap hook for fall-event indication Internal...

The Malta Dynamics K1001 Equipment Pro Bag is a heavy-duty, jobsite-ready gear bag built to carry your fall protection equipment, PPE, and tools with ease. Designed for durability and convenience, this rugged duffel features reinforced handles, weather-resistant material, and ample space for harnesses, lanyards, helmets, and more. Whether you're heading to the roof or the field, it keeps your gear organized and protected. keywords: Spacious main compartment holds a full-body harness, lanyard,...

The TB3-6072 series is a full-body, 3 D-ring fall arrester harness built for both fall arrest and restraint use. It features a padded waistbelt, breathable mesh frame, hi-viz polyester webbing, and tongue buckle leg straps with quick-connect chest buckle. Offered in sizes from small to 2X, it supports up to 310 lb (for sizes S–XL) and up to 400 lb for size 2X. Features 3 D-ring configuration: 1 dorsal and 2 side rings for positioning Hi-visibility polyester webbing with padded frame and...

The SafeWaze FrogLink Temporary/Re‑Useable Roof Anchor (019‑4005) is a stainless-steel anchorage point designed for fall arrest and restraint use on wood roofing applications. It features a 360° working radius, a built-in energy absorber, and a formed anchorage loop. This anchor can be used as a single-point fall arrest anchor or integrated into a horizontal lifeline system, ideal for temporary or mobile roof work.

The SafeWaze FS‑185 Pro Harness is a dependable, comfortably padded full‑body harness featuring a no‑tangle dorsal D‑ring and grommet-style leg straps for secure adjustment. It includes ergonomically designed shoulder pads, friction-style torso buckles, pass‑through chest buckle, and lanyard keepers. Built with abrasion‑resistant webbing and quality steel hardware, this harness is ANSI/OSHA certified for fall arrest applications across construction, utility, solar, or industrial environments. ...

The Guardian Fall Protection CR3-EDGE Class 2 Self-Retracting Lifeline is engineered for leading-edge applications where sharp edges pose increased risks. This single-leg SRL features an 8 ft galvanized steel cable, built-in energy absorber, and impact-resistant housing designed to withstand rough conditions. Rated as ANSI Z359.14-2021 Class 2, the CR3-EDGE provides fall arrest protection even in edge and foot-level tie-off scenarios. A swivel top connector improves mobility and reduces...

The Malta Dynamics C5106 Double-Leg Stretch Lanyard is a 100% tie-off fall protection solution designed to maximize safety during transitions between anchor points. Its stretchable 4.5'–6' design minimizes tripping hazards, while the internal shock absorber and three ANSI-compliant snap hooks ensure secure, low-impact fall arrest performance. Perfect for construction, roofing, maintenance, and industrial applications.Keywords: Double-leg design allows continuous tie-off for safer climbing and...

The FallTech 8204 Web Restraint Lanyard is a 4-foot fixed-length device designed to prevent users from reaching identified fall-hazard zones. Constructed with heavy-duty 1-inch polyester webbing and equipped with alloy steel snap hooks at both ends for harness and anchorage connections, this restraint lanyard features UV-resistant webbing and a durable build, making it suitable for job-site use where controlled prevention rather than fall arrest is required. Key features: Heavy-duty 1″...

The Guardian CB Swivel Top System (00680) is a bolt-on swivel cradle designed to attach to Guardian CB-12 or CB-18 Anchor Posts, enabling a self-retracting lifeline (SRL) to rotate a full 360°. This design improves mobility, minimizes swing-fall hazards, and allows the lifeline to retract properly by cradling it on edge. Constructed of durable powder-coated steel, the system accommodates most SRLs up to 50 ft—and up to 65 ft with an optional adapter—and installs quickly without tools, making...

The Guardian B7-Comfort Harness with Sternal D-Ring and Quick-Connect Chest and Leg Buckles is designed for workers who require both fall arrest and climbing safety. Built with durable, lightweight webbing and comfort padding, this harness offers long-term wearability without sacrificing protection. The addition of a sternal D-ring expands attachment options for ladder climbing and vertical systems, while the dorsal D-ring provides standard fall arrest protection. Quick-connect chest and leg...

The Guardian Fall Protection 046600 Retractable Cable Horizontal Lifeline is a versatile, portable system designed to provide fall protection for multiple workers along an elevated work surface. Built with a durable steel cable and retractable design, it allows quick setup, adjustment, and takedown on the jobsite. The system is engineered to maintain tension automatically, reducing slack and ensuring consistent fall protection coverage. Ideal for construction, roofing, and industrial...

The Malta Dynamics LE3111D Dual Leading Edge SRL is a Class 2, 100% tie-off twin-leg lifeline designed to protect workers exposed to leading edge and foot-level fall hazards. Each 11 ft. Dyneema® web leg includes a high-strength snap hook, while the central unit attaches securely to your harness for smooth movement between anchorage points. Engineered for roofing, steel erection, and deck work where traditional tie-off points are unavailable.Keywords: Dual 11 ft. Dyneema® web lifelines provide...

The Guardian CR5 11' SRL-P is a compact and lightweight self-retracting lifeline engineered for reliable fall protection across multiple applications. Designed for both single-leg and dual-leg configurations, it offers maximum versatility with connector options that include steel or aluminum snap hooks and rebar hooks. The SRL features an 11-foot galvanized steel cable lifeline enclosed in a durable polymer housing, providing smooth operation and dependable retraction. Built to meet OSHA and...

Built for crews working around energized equipment, the DE-6001-H combines non-conductive, dielectric hardware with high-visibility webbing so you’re easier to see and better isolated from accidental contact points. The harness delivers confident fall-arrest performance with smooth adjustability, clear inspection cues, and tidy connection management—made for long shifts in substations, industrial plants, and utility corridors. Features Dielectric dorsal D-ring and connectors to help minimize...

The FallTech 7451A Rotating D-Ring Anchor with Concrete Screw provides a reusable anchorage solution for cured concrete walls or ceilings. It features a plated stainless-steel anchor plate and an alloy-steel D-ring assembly with a precision bushing that allows full 360° rotation for improved connector alignment. The anchor uses a concrete screw installation method for efficient setup and can be used for temporary or permanent anchorage. Key features: Stainless-steel anchoring plate with plated...

The FallTech 7010C Tradesman Pro 3D Standard Full Body Harness is designed for professional use in fall-protection environments. It features plated alloy-steel hardware with a low-profile black finish, a V-slot locking dorsal D-ring plate to minimize slippage, a padded shoulder yoke for comfort, and easy-adjust tongue buckle leg closures. The non-belted design allows for freedom of movement while delivering ANSI/CSA/OSHA compliance for workers up to 310 lb. Key features: Non-belted full body...

The Guardian Fall Protection 01616 24" Chain Positioning Lanyard with Swivel Steel Rebar Hook is a rugged and reliable tool for workers who require secure tie-off during positioning applications. Built with a heavy-duty chain and a swiveling steel rebar hook, this lanyard ensures secure anchorage and minimizes twisting while in use. At 24 inches in length, it provides close positioning to keep workers stable and properly restrained when working hands-free. Designed for durability and safety,...

The SafeWaze 018-5010 is a 7-foot dual-leg lightweight self-retracting lifeline (SRL-P) featuring durable steel rebar hooks for secure tie-off to large anchor points. Constructed with high-strength polyester webbing and an integrated energy absorber, this unit ensures safe, 100% tie-off mobility. Its compact design and swivel top connector help reduce lifeline twisting, making it ideal for high-movement job sites in construction and general industry. ...

The Guardian Fall Protection Angel Anchor System (00260) is a portable, non-penetrating ballast anchor designed specifically for commercial roofing applications. This reusable anchor eliminates the need to drill or penetrate roofing membranes, preserving roof integrity while providing a secure tie-off point. Built from galvanized steel with integrated weights, the system offers stability for fall arrest and restraint applications. Its modular design makes transport, assembly, and disassembly...

The Guardian Fall Protection 01261 4 ft. Single Leg Non-Shock Absorbing Lanyard with Rebar Hook provides secure tie-off for restraint and positioning applications where fall arrest is not required. Its 4-foot length allows limited mobility while reducing slack for improved safety. Built with heavy-duty webbing and a large rebar hook for versatile anchorage connections, this lanyard is durable and reliable in demanding environments. Designed for construction, maintenance, and industrial use,...