Equipment

The Voltec 09-0T676 is a U-Ground T-Slot temporary power box built for rugged outdoor applications. It includes a 50A inlet and outlet, a 30A circuit breaker-protected receptacle, and six 20A receptacles each with dedicated GFCI modules. It carries a NEMA 3R rating for wet/damp conditions and is cETLus certified. Key Features 50A inlet and 50A outlet recessed for safety Six 20A T-slot receptacles each with dedicated GFCI protection One 30A / 250V circuit breaker-protected receptacle...

The Billy Goat F902H Force Blower, with a 9HP Honda engine, delivers fast, quiet cleanup. Its F9 Smooth, Rounded Housing enhances airflow and durability. The 16-blade fan and Patented Aim-N-Shoot™ technology provide precise airflow control, while padded handles and a lightweight design improve comfort and speed. The soft rubber Forward Discharge makes cleaning along walls and fences easy.

RBM003 is a set of six Heat Sink Magnets for the OMG RhinoBond system, used immediately after each induction weld to ensure a strong, consistent bond. These magnets transfer heat away from the welded plate to allow proper curing and reduce membrane movement. The polymer body and magnet design are optimized for alignment, heat dissipation, and field durability. Key Features six magnets included so multiple welds can be held down at once made of a proprietary polymer to improve thermal transfer...

The Rooftop Equipment 14" Bead Gravity-Driven Adhesive Applicator (Mini) delivers precision adhesive application through a simple gravity-feed system. It evenly dispenses four adhesive beads per pass, reducing material waste and labor time. Designed for small or detailed roof areas, this applicator includes adjustable wheels to align with roof deck flutes and a polyethylene tank that allows cured adhesive to peel away easily after use. Built for single-component or pre-mixed adhesives, the...

When choosing a Roofer’s Helper Bracket, consider factors such as the specific profile of your standing seam roof, the typical roof pitch you work with, and the weight capacity required. Metal Plus LLC is known for producing high-quality roofing tools, so their Roofer’s Helper Bracket is likely a reliable choice for professional roofers looking to improve safety and efficiency on the job. Designed to hold solar panels, skylights and chicken ladders in place on the roof Features & Benefits...

The Rooftop Equipment Titan 18" Finishing Frame and Roller is engineered for consistent, high-quality roof coating and adhesive applications. It features an 18-inch roller with a precision-balanced frame designed for uniform coverage across large, flat roofing surfaces. The welded steel frame provides strength and longevity, while the roller design ensures smooth coating distribution for a professional-grade finish. Key Features: 18-inch roller provides wide, even coating coverage Heavy-duty...

The Rooftop Equipment TS-40-RAX Superwide Tank Spreader Roller Axle Assembly is a direct replacement component for 40-inch Superwide Tank Spreader systems. Engineered for strength and balance, this axle provides smooth roller movement and consistent coating distribution across large roof surfaces. Made from corrosion-resistant metal, the TS-40-RAX maintains long-term durability under demanding jobsite conditions and ensures the roller performs with stability and precision. Key Features:...

Do more jobs in less time and with less effort. Payback in 3 to 5 jobs. The Rapid Roof Remover will enable you to enjoy these benefits, increase your profits and the productivity of your crews. This AMERICAN-MADE, lightweight, PATENTED, pneumatic tool with its 30" heat treated tear-off blade is capable of removing a square of multi-layered shingles (we've removed up to 5 layers in 1 pass) and fasteners in 3 to 5 minutes. Adjustable to various pitch of roof, this powerful machine can also be...

Rooftop Equipment Hi Coverage Replacement Hand Rollers are engineered for maximum coating retention and smooth, uniform application on flat or low-slope roofing surfaces. Available in 4", 8", 16", and 24" sizes, each roller features a 1-inch nap for superior material pickup and consistent coverage. These replacement rollers are compatible with Rooftop Equipment standard and hi coverage hand roller frames. Key Features: Available in 4", 8", 16", and 24" roller widths 1-inch nap design for...

The Powerblanket BH55-RR is a 55-gallon full-wrap drum heater with a fixed internal thermostat preset to approximately 100°F. It uses Rapid Ramp Technology so that it initially draws more power to reach the preset temperature then cycles down to maintain it. Designed for both steel and poly drums, it delivers uniform heat, durability, and safety for demanding industrial conditions. Key Features: Fixed internal thermostat preset to ~100°F (±10°F) Rapid Ramp mode: initially full power, then...

Roll smarter, not harder—with the Roll-o. The Roll-o from Gator Roofing Equipment is an innovative, lightweight roll carrier designed to help two people move heavy roofing material rolls—up to 850 lbs—with far less strain and effort. Created by professional roofers for real jobsite conditions, this tool simplifies the handling of TPO and EPDM rolls that would otherwise require a full crew. The Roll-o’s unique design features a built-in retractable ratchet strap to secure rolls quickly, while...

The ACRO 29904 Roof Bracket is a contractor-grade 90° support bracket with a 19″ back plate designed for use with structurally sound 2×4 lumber planks. It includes four offset nail slots that exceed OSHA’s three-slot requirement, ensuring secure placement and preventing upward slippage. Reinforced with six long welds and a back-stiffening rib, the bracket resists twisting and flexing while maintaining structural integrity. Smooth, rounded edges protect roofing surfaces and workers’ hands,...

The RACE Fixed Roof Bracket is a rigid scaffold bracket designed to mount perpendicular (90°) to the roof surface for staging and slide guard use. It is intended for roofs with pitches between 4/12 and 6/12 and must be spaced no more than 8 feet apart when used as part of a slide guard system. The bracket is built for experienced tradesmen and requires appropriate fall protection and compliance with OSHA standards for use. Key features: Fixed 90° orientation to roof surface Designed for slide...

Features: Multipurpose drum bung nut wrench eliminates the need for extra tools for drum bungs or plugsIncludes a ring and faucet wrench feature for ideal operationFeatures durable construction for added strength and long lifeUniversal design fits all types of metal or plastic for optimal resultsSpark ResistantBung Openings (in.): 2 and 3/4Wrench Opening (in.): 1-1/2Handle Length (in.): 4-1/4Dims: 1.75 W x 10.5 L x 2.25 H ...

The Winco 16199-043 Industrial Series 4-Wheel Dolly Kit provides stable, ground-level mobility for select Winco portable generators. It uses 10-inch flat-free hard rubber tires, dual full-width steel axles, and a baked-on powder-coat finish for durability in tough conditions. Key Features 10-inch flat-free hard rubber tires for all-terrain mobility Full-width steel axles across the generator for strength and stability Integrated push/pull brake clamp with spindle for secure parking Baked-on...

The SPA‑06SRAHH Hand Hoist Beam offers a cost-effective, reliable hoisting solution for small-job applications. Engineered with a 300 lb lift capacity, this beam allows counterweights to lay flat—eliminating the need for an additional counterweight pan (weights sold separately). It’s a compact, efficient option for streamlined hoist setups on the job site.

The Tie Down 60005 Telescopic Support Brace is a heavy-duty stabilizing accessory for TranzPorter ladder hoist systems that bolts directly onto the track. It is engineered to support material lifts in the 250 to 400 lb range and stabilize the hoist when track extensions are used. This brace helps maintain safe and rigid alignment of extended track segments up to 44 ft in total height. Key Features Adjustable telescopic support brace for hoist track stabilization Supports material loads from...

Rapid Roof Remover Replacement Blades for roofing and flooring.Available in 18" Length & 30" Length 

RACE steel pipe nipples feature spacing for a wrench and male ends. Each fitting is independently lab verified to meet applicable chemical and physical properties, is 100% air tested, and is FM approved at 300 lbs. Available sizes include 1½ inch by 4 inch and 1½ inch by 6 inch. Key features: Spacing for wrench with male ends Independent lab verification of applicable chemical and physical properties 100% air tested FM approved at 300 lbs Offered in multiple lengths for kettle accessory use ...

Spar Marathon 55-Gallon Insulated Tank w/ Drain Cock Complete insulation wrap maintains asphalt at the correct application temperature. The quick change channel irons will securely support this tank to a utility or 4-wheel cart. * PLEASE NOTE. 4-Wheel Cart & Channel Irons shown are Not Included* ...

Heavy duty design with 5.5 HP overhead valve Honda engine Cuts 4-1/2 inch path with 8 carbide tipped pins on 4 inch diameter solid steel drum Easy access to drum assembly for maintenance through the safety cover Adjustable cutting depth Ideal for repair work around gravel stops, expansion joints, and flashing Drum rotation provides self propulsion Safety splash guards for operator protection ...

The Rooftop Equipment Ultimate V-Manifold Two-Part Adhesive Applicator V-ULT is engineered to efficiently combine and apply dual-component roofing adhesives. Its precision manifold design ensures proper blending of both parts A and B at the point of discharge, resulting in uniform coverage and superior bonding. Built for commercial roofing applications, the V-ULT enhances accuracy, minimizes waste, and provides a smooth, balanced adhesive flow for consistent membrane adhesion. Key Features:...

The Tramex DSAL Dec Scanner is a mobile, non-destructive impedance scanner built for surveying large roof areas for excess moisture and leaks. It utilises a low-frequency signal through a rubber electrode mat to detect and map moisture conditions in roofing and waterproofing systems. The instrument features three sensitivity ranges to accommodate varying roof membranes and insulation thicknesses and enables rapid coverage of areas up to 100,000 sq ft in a typical day. Key features:...

Experience unbeatable power and efficiency with our 6” discharge blower, delivering air velocity just under 200 mph to clear debris faster than any other model. Featuring patented Aim N Shoot™ technology, it allows fingertip control to direct airflow precisely where needed, with a lockable position for added convenience. The 16-blade fan design maximizes air movement, while the F18 smooth, rounded housing reduces air voids for a quieter, more powerful performance. The self-propelled option,...

OBPC3-SEALKIT is the official replacement pump seal kit for the OMG PaceCart 3 adhesive dispensing cart. It contains the set of critical seals, O-rings, gaskets, and retaining clips needed to restore pump performance, eliminate leaks, and maintain consistent adhesive delivery through the PaceCart 3 system. Using correct parts ensures longevity and reliable operation under jobsite conditions. Key Features set of all OEM seals, O-rings, gaskets, and clips for the pump of PaceCart 3 helps stop...

The Powerblanket TH275 is a full-wrap tote heater designed for 275-gallon IBC totes. With a digital programmable thermostat adjustable up to 145°F (±5°F), it ensures safe and even heating for water, chemicals, DEF, food products, and other bulk liquids. Its insulated design maintains material viscosity, prevents freezing, and provides reliable cold-weather protection while reducing downtime and waste.Key Features: Designed for 275-gallon (1000 L) IBC totes Digital programmable thermostat...

PJR STATIC 2-Part Spray Applicator The PJR has become popular & well known in a short amount of time across North America & parts of Europe because of it's simple, lightweight, efficient & effective design. This mobile spray foam system uses an OEM Custom GRACO Reactor E15p as the main feature. The PJR is the #1 spray cart in the industry for good reason.. It is the most cost-effective spray foam system of its kind, paying for itself after 1 medium size job. Whether you're expanding your...

Steinel Cordless Professional Heat Gun Kit The Mobile Heat series are Steinel's new industrial cordless, battery-operated heat tools designed specifically for professional in-field maintenance work and repair applications with no generator needed. The MH5 has a temperature range of 120-930° F with an airflow rate up to 10.5 cfm. Heating up in less than 30 seconds, this tool keep working hard in hard-to-reach spaces, making repairs easy. Available with several options including the tool with...

Optional leg kit for Malco Mini Brake (Item # MAL-MB48A)

The Winco W10000VE portable generator is built for heavy-duty applications, offering 10,000 watts of surge capacity and 9,600 watts of continuous power. It is powered by a Briggs & Stratton Vanguard 570 cc V-twin engine, features a stout wrap-around tubular steel frame, and includes advanced control systems like the YourGen meter and automatic voltage regulation for reliable performance. Key Features 10,000 watts surge / 9,600 watts continuous output Vanguard 570 cc V-twin engine with low-oil...

Surf X Flush 2000™ is a powerful cleaning formula designed for flushing and immersion cleaning of spray equipment, metering systems, and feed lines. It loosens and removes cured urethane foam, adhesive, and resin deposits. The solution is also effective at cleaning polymer overspray, coatings, and industrial resins. Key features: Effective for immersion and flushing of spray systems Removes cured urethane foam, adhesives, and resin build-up Compatible with polyurethane, epoxy, acrylic, and...

The Tie Down 90010 replacement cable delivers high fatigue resistance and smooth operation, ideal for restoring performance to TranzSporter ladder hoists. It is constructed of stainless steel wire with a braided eyelet termination. The cable length is 100 ft, with a diameter of 5⁄32 in, and it is compatible with TP200 and TP250 hoist models. Key Features Stainless steel construction for corrosion resistance 5⁄32 in diameter, 100 ft length Braided eyelet termination for easy attachment...

The Powerblanket Lite PBL55 is a 55-gallon drum heater that delivers consistent, full-wrap warmth to protect temperature-sensitive contents in cold conditions. Its internal preset thermostat targets approximately 145°F to help maintain material viscosity and prevent freezing, while simple 120V plug-in operation and a lightweight design make setup fast and portable. Key Features: Designed for standard 55-gallon drums Internal preset thermostat targets 145°F (±10°F) 120V operation with standard...

This is a 40 mm white rubber drive wheel intended as a replacement for automatic welding machines. It fits models made by BAK, Leister, Sievert, and other similar units. The rubber construction provides traction and durability during welding operations. Key features: 40 mm white drive wheel Rubber material Replacement for welding robots Compatible with BAK, Leister, Sievert, and similar Designed to restore drive performance on auto-welders ...

The ACRO 70026 kettle skimmer is a professional-grade accessory featuring a 40″ steel handle attached to a 10″ × 12″ skimming blade—crafted for effective removal of debris from hot tar, asphalt, or bitumen kettles. Its long, sturdy handle ensures safe distance from heat, improving user control during operation. Engineered for durability with heavy-duty construction, the skimmer efficiently clears kettles to reduce fire risk and maintain material consistency across jobsites, providing a...

The Winco WL16000HE is a high-output portable generator designed for demanding applications. Delivering 16,000 watts surge and 14,000 watts continuous, it is powered by a Honda iGX800 fuel-injected V-twin engine. Built with a heavy-duty wrap-around tubular steel cradle and equipped with YourGen metering, this generator combines power, safety, and durability. Key Features 16,000 watts surge / 14,000 watts continuous Honda iGX800 fuel-injected V-twin engine Wrap-around tubular steel cradle with...

The Tramex CME5 Concrete Moisture Encounter is an analog, non-destructive moisture meter designed for measuring moisture content in concrete slabs and screeds. It uses a low-frequency signal to provide quantitative readings to a depth of approximately ¾" while avoiding drilling or surface damage. The meter offers comparative readings for gypsum floor screeds and integrates Bluetooth connectivity to the Tramex Meters app for moisture mapping and reporting. This durable and ergonomic device is...

For decades, the RGC Classic Platform Hoist has been a customer favorite, known for quickly and efficiently lifting shingles and other materials to the roof. This powerful ladder hoist minimizes effort, reduces fatigue, and helps prevent injuries by safely transporting heavy materials with ease. Often referred to as a laddervator or tranzporter, RGC ladder lifts are designed for superior performance and quick assembly, allowing you to complete jobs faster and more effectively....

The Powerblanket Lite PBL100 is engineered to warm and maintain 100-pound propane cylinders for dependable fuel flow in cold conditions. Featuring an internal preset thermostat set at approximately 90°F, it prevents pressure loss and ensures efficient propane performance even in freezing weather. Built with a lightweight yet durable vinyl shell, the PBL100 is portable, safe, and energy-efficient, providing a cost-effective alternative to unreliable heating methods.Key Features: Designed for...

The Powerblanket TH330 Tote Heater is designed for efficient and reliable heating of 330-gallon IBC totes. Featuring a programmable digital controller, this heater maintains consistent temperatures up to 145°F, protecting sensitive materials from freezing or viscosity issues. Its full-wrap insulated design distributes heat evenly, ensuring safe operation for industrial and commercial applications.Key Features: Programmable digital controller with max 145°F setpoint Full-coverage insulated...

Hopper retainer bars are added to the intake hopper when used in intermediate positions. The retainer bar allows other sections to sleeve into the intake hopper safely. The galvanized bar comes complete with four 5/16″ bolts, washers and locknuts. Add to Intake Hopper When Used in Intermediate Positions Includes Four (4) 5/16” Bolts, Four (4) Washers and Four (4) Locknuts Weight: 2 lb. Dims: 21 x 32 x 1 in ...

GATOR Husky Hauler XL is the most efficient and safet way to moce large amounts of materials across a roof deck. the 30" x 102" bed is made of 1/4"x2" angle iron. This unit has a large folding gate to prevent materials from falling on the operator. The lockable folding gate can be folded flat to enable trailer to be used as a regualr traler. can also be ordered without a gate. The Husky Hauler can carry up to 2,000 lbs. of material with ease. The 18-8.50 tires distribute load evenly on the 30”...

Features: Come complete with operator safety fence Easy to set up; provides a safe holding system for trash hopper and chutesComes complete with 12 counterweights Hopper and trash chute sections are not included and are sold separately Maximum number of trash chutes allowed for the system: 16 Sections * Hopper and Trash Chutes Sold Separately *

The 8" Control Flow Roller Frame CFRF-08 from Rooftop Equipment is engineered for precision roof coating applications using spray-fed technology. It connects directly to spray rigs, feeding coating material through dual dispensing heads to the roller surface without atomization. Built with a welded steel frame, durable dispensing system, and 6-foot aluminum handle, it ensures uniform coverage and eliminates overspray even in windy conditions. Key Features: 8-inch control flow roller frame for...

The patented DURAFLAT™ Converter is used to attach the DURAFLAT™ Flat Chute Sections to any of DURACHUTE’s™ outriggers via the Basic Support Frame. The converter comes complete with all necessary chains, hooks, nuts and bolts. It is 36″ in diameter. Converts the two chain attachment from the Intake Hopper to a three chain attachment for use with the plastic folding chutes. Weight: 46 lb.Dims: 36 x 36 x 5 in

This replacement blade is designed for the RACE Super Tear Off Bar and restores tearing performance on demo tools. The blade measures 10″ in length, 3″ in width, and ½″ in thickness. It is sold as blade only, excluding the mounting hardware or bar. Key features: Hardened steel blade construction Dimensions: 10″ × 3″ × ½″  Compatible with RACE Super Tear Off Bar systems Sold as blade only (no bar or other components) Easy replacement for worn or damaged blades ...