OlyBond Adhesives

The OMG 98700 Quick Connects (6-pack) are replacement/upgrade couplers for fluid adhesive systems like PaceCart, Adco Cart, or roof sprayers. They feature universal 38 mm threaded or snap-in necks, automatic flush valves to reduce spills, and durable materials for long-term reliability. Sold in a 6-pack to facilitate multiple machines or replacements, these quick connects help improve productivity and reduce setup time. Key Features universal 38 mm necks (threaded or snap-in) for broad...

OB500PCT-PSKT is a replacement pump seal kit designed specifically for the OMG PaceCart 1 & 2 adhesive dispensing carts. It includes all the necessary seals and components to refresh or restore the pump’s integrity, helping to prevent leaks, maintain pressure, and ensure smooth, consistent adhesive flow. Ideal for routine maintenance especially when pump performance begins to degrade. Key Features full seal kit for pump of PaceCart 1 & 2 units helps prevent leaks and maintain pump pressure...

OB500LTS-1GAL is a storage fluid (PCPreserver) designed for long-term preservation of PaceCart adhesive dispensing equipment. It helps flush out residual OlyBond500 adhesive from pumps, hoses, and gun assemblies and lubricates internal parts during periods of non-use. The formulation is non-hazardous, very low VOC, and compatible with both Part 1 and Part 2 sides of the PaceCart system. Key Features enables long-term storage of PaceCart equipment without damage flushes adhesive residues from...

The OB213PUMP-SHAFT is the official replacement shaft for the pump in the PaceCart2 adhesive system by OMG. Designed to replace the original shaft when wear, damage, or bending causes reduced flow or leaks, this shaft helps restore pump performance and longevity. It is manufactured to OEM tolerances to ensure proper fit and alignment in the PaceCart2 pump assembly. Key Features OEM replacement shaft for PaceCart2 pump to restore performance manufactured to match original dimensions and...

OB500SSGUN-SU18V is the cordless stand-up power applicator by OMG for use with OlyBond500 SpotShot, NightShot, and fleece membrane adhesive cartridges. It uses 18-volt lithium-ion batteries for extended runtime, comes with fast charging, and is designed for ease of use on projects where mobility and speed matter. It dispenses adhesive in 12-inch on-center bands, with the bead rising about ¾- to 1-inch above the substrate; chemical cure takes about 10-15 minutes depending on temperature. Key...

OB500SS-R is the regular temperature SpotShot version of OMG’s OlyBond500 two-component polyurethane foam adhesive, supplied in 1,500 ml cartridge sets. It is designed for stand-up or hand applicators, ideal for smaller jobs, repairs, and hard-to-reach areas. The adhesive is fast-acting, low-odor, provides excellent rise and board adhesion, and cures in roughly 10-15 minutes depending on ambient conditions. Key Features regular grade formulation for temperatures 40 °F (4 °C) and above packaged...

OB500SSGUN is a SpotShot hand applicator designed for use with OlyBond500 SpotShot two-component cartridges. It is ideal for roof repairs, edges, or smaller jobs where a full-size dispensing cart isn’t practical. Lightweight and easy to maneuver, it delivers the correct 1:1 mix for adhesive cartridges ensuring accurate bead placement and consistent cure.Key Features designed for smaller jobs, repairs, edges, or hard-to-reach spots works exclusively with OlyBond500 SpotShot 1,500 ml cartridges...

The OMG PaceCart 3 (SKU OB500PCART3) is a durable and high-output dispensing cart engineered specifically for applying OlyBond500 two-part insulation adhesive. It delivers high production rates (up to 120 squares per hour) while being user-friendly and serviceable. The design includes a 30-foot application hose, color coded trays to avoid cross-contamination of Part-1 and Part-2 adhesive lines, built-in volt meter, and generator shelf for rooftop mobility. Key Features capable of dispensing...

OBPC15KIT is a conversion kit for OMG PaceCart 2B and PaceCart 3 equipment that allows contractors to use two 15-gallon drums (30 gallons total) of OlyBond500 adhesive instead of smaller bag-in-box sets. It increases dispensing capacity, saves time by reducing refills, and installs quickly in under 15 minutes. The kit provides flexibility to use drums or bag-in-box sets as job conditions demand, enhancing productivity on large roofing jobs. Key Features conversion to allow use of 15-gal drums...

OMG OB18WHIP is a 36-inch whip hose designed as a replacement part for the OMG PaceCart3 adhesive dispensing system. It connects between the Vee manifold and the 30-foot material hose, allowing for better flexibility at the gun and fast replacement in case of clogs. Built with Moisture-LOK lining for material purity and rated for high pressure to perform reliably in demanding jobsite conditions. Key Features 36-inch length for good reach and flexibility at the gun Moisture-LOK lining to reduce...

The OMG OB500HOSE-30 is a 30-foot replacement material hose for OMG’s PaceCart adhesive dispensing systems. It is built with Moisture-LOK lining to prevent material contamination, rated for high working pressure, and designed to keep adhesive flow consistent even in demanding jobsite conditions. This hose helps maintain performance on larger jobs by giving roofers reach and flexibility. Key Features 30-foot hose length for extended reach and maneuverability Moisture-LOK lining for maintaining...

OB5001-TANK and OB5002-TANK are the pressurized Part 1 and Part 2 canisters for the OMG OlyBond500 two-component polyurethane foam adhesive system. These tanks allow contractors to apply adhesive without requiring a PaceCart, making them highly portable for a range of job sizes. The system dispenses semi-liquid beads that rise ¾- to 1-inch above the substrate and cure in 4-8 minutes depending on conditions. The canisters are designed for applications where speed, mobility, and convenience are...

The OMG OB17GRAVHOSE is a clear Tygon gravity hose designed for use with OMG’s PaceCart2 and PaceCart3 adhesive dispensing carts. It allows adhesive to flow by gravity, helping maintain consistent application performance. The hose is built with chemical resistance in mind, and designed as a durable replacement part to keep the dispensing system reliable. Key Features replacement part for PaceCart2 and PaceCart3 carts clear Tygon construction for visibility of adhesive flow gravity-fed flow for...

OB500-DUALTK is a small canister kit for OMG’s OlyBond500 two-component, low-rise polyurethane adhesive. The set includes both Part 1 and Part 2 in pressurized canisters, plus a hose, gun assembly, mix tips and extension tubes to allow roofers to apply adhesive without extra equipment. It’s ideal for jobs that need mobility, quick setup, or spattering application for fleece backed membranes. Key Features equipment-free kit with pre-pressurized canisters, hose, gun, mix tips, and extensions...

OMG Bead Style Replacement Mix Tips are designed for use with OlyFill two-component foam sealant systems & OlyBond500 Adhesive System. These disposable static mixing nozzles ensure proper blending of material during application and help maintain consistent bead output. Sold in packs of 10, these replacement tips are ideal for contractors who need fresh nozzles between applications to ensure proper mixing and performance. Bead-style configuration is designed for controlled foam placement in...

OB500PT-GUNKIT3 is a replacement gun and hose kit designed for OMG’s canister adhesive systems. It includes a gun assembly with trigger lock and the hose components needed to deliver both adhesive Part 1 and Part 2 reliably. This kit ensures precise, controlled application and makes maintaining or repairing the adhesive dispensing setup easier. Key Features gun assembly with trigger lock to prevent accidental dispensing dual hose assembly for simultaneous flow of Part 1 & Part 2 components...

The OMG OlyFill™ Dual Tank System is a compact two-component foam sealant kit designed for roofing and construction applications. This portable system includes two pressurized cylinders (Part 1 and Part 2) that combine through a dispensing gun and static mixing tip to produce expanding polyurethane foam for filling gaps, voids, and penetrations. The compact tank configuration allows for easier handling and transport compared to larger bulk systems, making it suitable for service crews, smaller...

OMG OlyFill™ Foam Sealant is a one-component expanding polyurethane foam designed to fill gaps, voids, and penetrations in roofing and construction applications. It expands upon application to help seal irregular openings and provide insulation and air sealing around roof penetrations, curb details, and other transitions. OlyFill is commonly used in commercial roofing environments where controlled expansion and gap filling are required prior to flashing or finishing. Once cured, the foam can...

The OMG PaceCart Pro15 is a high-output adhesive dispensing cart designed for commercial roofing crews installing insulation with OMG OlyBond adhesives. The Pro15 is built to handle both 5-gallon Bag-in-Box adhesive packaging and 15-gallon drums, giving contractors more flexibility on larger roofing jobs without needing a separate drum conversion kit. This cart uses variable-speed pumps to help control adhesive output and keep production moving across the roof. It is designed for use with OMG...

OMG OlyGlu™ is a canister-applied membrane adhesive designed for bonding TPO and EPDM roofing membranes in commercial roofing systems. The pressurized canister system allows contractors to apply adhesive quickly and evenly using a hose and spray gun applicator, helping improve installation speed and coverage. OlyGlu is commonly used for field membrane adhesion in single-ply roofing assemblies where controlled spray application is preferred over traditional bucket adhesives. The system is...

OMG OlyGlu™ is a canister-applied membrane adhesive designed for bonding TPO and EPDM roofing membranes in commercial roofing systems. The pressurized canister allows contractors to apply adhesive quickly and evenly using a hose and spray gun applicator. The smaller canister format provides a more compact adhesive solution for smaller roofing areas, service work, and repair applications while still delivering consistent spray coverage and membrane bonding performance. Key features: Designed...

The OB5001-OB5002 set is the 10-gallon Bag-in-Box version of the OMG OlyBond500 two-component, low-rise polyurethane foam adhesive. It includes 5 gallons each of Part 1 and Part 2 adhesive, designed for use with PaceCart, SpotShot applicators, or compatible dispensing tools. It is formulated for new and re-roof applications, delivering rapid adhesion of insulation boards with excellent wind uplift resistance and ultra-low VOC emissions. Key Features Bag-in-Box packaging: 5 gallons Part 1 + 5...